ARMY MIL-P-45605 A-1964 PLOTTING BOARDS FLASH RANGING FIRE CONTROL M5A2E2 AND M18《射击控制光测标图板 M5A2E2和M18》.pdf

《ARMY MIL-P-45605 A-1964 PLOTTING BOARDS FLASH RANGING FIRE CONTROL M5A2E2 AND M18《射击控制光测标图板 M5A2E2和M18》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-P-45605 A-1964 PLOTTING BOARDS FLASH RANGING FIRE CONTROL M5A2E2 AND M18《射击控制光测标图板 M5A2E2和M18》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-P-P5605A(MU) 24 MARCH 1964 SUPERSEDING MIL-E45605(ORD) 24 FEBRUARY 1959 MILITARY SPECIFICATION PLOWING BOARDS, FLASH RANGING, FIRE CONTROL: M5AZE2 AND M18 1. SCOPE DRAWINGS 1.1 This specification covers Flash Ranging Plotting Boards M5A2E2 and M18 which are used to plot the location of enemy bat

2、teries (see 6.1). 2, APPLICABLE DOCUMENTS 2.1 The following documents, of the issue in effect on date of invitation for bids or re- quest for proposal, form a part of this speci- fication to the extent specified herein, SPECIFICATIONS U.S. ARMY MUNITIONS COMMAND F8567955-Plotting Board, Flash Rang-

3、ing, Fire Control: M18. F8582661-Plotting Board, Flash Rang- ing, Fire Control: M5- A2E2. (Copies of specifications, standards, drawings, and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the cont

4、racting officer.) MILITARY 3. REQUIREMENTS MIL-F-13926 -Fire Control Materiel ; GeneralSpecification Governing the Man- uf acture and Inspec- 3.1 Materials. Materials shall be in accord- ance with drawings, material specifications, and general specifications forming a part of this specification. tio

5、n of. MIL-P-14232 -Parts, Equipment and Tools for Ordnance Materiel, Packaging of, MILI46208 -Inspection System Re- quirements. STANDARDS MILITARY MIL-STD-106 -Sampling Procedures and Tables for In- spection by Attri- butes. 3.2 Fabrication. The plotting boards shall be manufactured in accordance wi

6、th Draw- ing F8582661 for the board M5A2E2 and F8567955 for the board M18 and the respec- tive drawings pertaining thereto. The re- quirements of this specification are detailed only to the extent considered necessary to insure inherent quality and performance capabilities. 3.3 General specification

7、. The contractor shall be responsible for adherence to, and compliance with, the following requirements of Specification MIL-F-13926. MILSTD-109 -Q u a 1 i t y Assurance Terms and Defini- tions. (b) Dimensions and tolerances (a) Order of precedence OB Provided by IHSNot for ResaleNo reproduction or

8、networking permitted without license from IHS-,-,- MIL-P-qSbOSA 12 9999906 O308233 1 MILP-45605A(MU) (c) Inorganic protective surface fin- ishes (a) Part identification and marking (e) Workmanship 3.4 Environmentai. 3.4.1 Storage temperatzcres. The plotting boards shall show no evidence of physical

9、failure and shall meet all performance re- quirements of this specification at a standard ambient temperature of between 60 and 90F. after having been exposed to and thermally stabilized at ambient temperatures of -80 and +160 F. 3.4.2 Operating temperatures. The plotting boards shall meet the appli

10、cable requirements of 3.8 while exposed to and thermally stabi- lized at ambient temperatures of -40 and +160 F. 3.5 Plotting scale flatness. The plotting scale of the drafting machine shall lie flat from the “i” graduation to the “16” grad- uation when the “11” graduation is at the center of the bo

11、ard. The ends of the scale shall lie flat within 0.031 inch. 3.6 Paralielism. When ained with the fidu- cial edge of the plotting scale, the grid lines of the plotting disk shall be parallel to the fiducial edge within 0.016 inch throughout their entire length. 3.7 Accuracy. Lines drawn forming a ce

12、n- trally located square measuring 16,000 meters per side shall portray a perfect square. Each side shall be equivalent to 16,000 meters 16 meters. Lines connecting the diagonally op- posite cprners of the square shall form the hypotenuse of right triangles. The hypotenuse of each shall measure 22,6

13、27 meters 221 meters. 3.8 Operability. 3.8.1 Torque. The torque required to rotate the slow motion knob shall not exceed 9 pound inches at a standard ambient temperature of between 60 and 90 F., and 12 pound inches at the extreme operating temperatures speci- fied in 3.4.2, 3.8.2 Plotting board tabl

14、e. With the brake lever pressed and held, it shall be possible to rotate the plotting board table through its entire travel without binding. With the brake lever released, the braking mechanism shall hold the table in a clamped position but will allow fine adjustment with the slow motion knob. 3.8.3

15、 Drafting machine. There shall be no binding in any part of the drafting machine when the plotting scale of the machine is moved back and forth over the entire plotting disk. 3.8.4 Plotting d&k surface. The plotting disk shall have a surface that will allow clear pencil markings and clean erasures.

16、The sur- face shall have no defects such as pits, digs, scratches, and stains which may be mistaken for pencil marks. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the contract or pur- chase order, the supplier is responsible for the performance of

17、all inspection require- ments as specified herein. Except as other- wise specified, the supplier may utilize his own or any other inspection facilities and services acceptable to the Government. In- spection records of the examinations and tests shall be kept complete and available to the Government

18、 as specified in the contract or order. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.1.1 General provisions. The quality assur- ance

19、 provisions of this specification and of other documents referenced herein form the basis for inspection to be performed by the supplier. Inspection shall be in accordance with the requirements of Specification MIL- 1-45208 and the component inspection re- quirements of Specification MIL-F-13926. De

20、finitions of inspection terms not otherwise defined herein shall be as listed in Standard MIGSTD-109. 2 c I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-E MIL-P-560CA 12 999970b 0308234 3 Requirement I Test procedure Critical: None Major: AQL 1.0%

21、 101. Plotting scale flatness 102. Parallelism 103. Accuracy 104.Torque 105. Plotting board table 106. Drafting machine 201. Plotting disk surface Minor: AQL 2.5% 3.5 3.6 3.7 3.8.1 3.8.2 3.8.3 3.8.4 4.6.3 4.5.4 4.5.5 4.5.6 Tactile Tactile Visual 4.23 Dkpositivn of non-conforming prod- &. Rejected lo

22、ts shall be screened for all de- fective characteristics. Removal or correction of defective units and resubmittance of re- jected lots shall be in accordance with “Ac- Y ceptance and Rejection” as specified in Standard MIL-STD-105. 4.3 Control tests. 4.3.1 General. One plotting board shall- be sele

23、cted at random from each 100 produced, or from each months production, whichever occurs first, Control samples shall have suc- cessfully met all acceptance tests specified herein prior to conducting the following ex- aminations and tests : Control fest Requirement Test procedure Materials 8.1 Drawin

24、gs and Speci- Fabrication 3.2 Visual and Drawings General Specification 3.8 Visual and MIL-F- fications 13926 4.3.2 Temperature tests. Three plotting boards shall be selected at random from each 50 produced, or from each months produc- tion, whichever occurs first, to determine compliance with the s

25、torage and operating temperatures as specified in 3.4.1, 3.4.2, 4.5.1 and 4.5.2. 4.3.3 Control test failure. Should a control test sample fail to meet the specified test re- quirements, acceptance of the product will be suspended by the Government until neces- sary corrections have been made by the

26、con- tractor and the resubmitted samples have been approved. 4.4 Inspection equipment. Except as other- wise provided for by the contract, the con- tractor shall furnish and maintain all required measuring and testing equipment in accordance with the “Measuring and Test Equipment” requirement of Spe

27、cification MIGI-45208. The Government reserves the right to use the test equipment for its own independent inspections to the extent that such use will not unduly interfere with the contractors delivery schedule. 4.4.1 Government furnished inspection equipment. Where the contract provides for Govern

28、ment furnished test equipment, care and maintenance of test equipment shall be in accordance with “Measuring and Test Equipment” and “Government Furnished Mat erial” requirements of Specification MIL-1-45208. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

29、 IHS-,-,-MIL-P-qShOSA 12 m 9999906 O308235 5 4.4.2 Gontractoy f u c t i 8 h e d inspection 4.4.2.1 Government de&giz. Ali inspection equipment required by drawings forming a part of the contract and not provided by the Government shall be supplied by the contrac- tor in accordance with the “Inspecti

30、on Pro- Visions” of Specification MIL-145208. 4.43.2 Contractor design. The contractor shall design and supply inspection equipment compatible with the “Test Methods and Pro- cedures” specified in 4.6, and with the Tomponent Inspection” requirements of Specification MIGF-13926. Concept, con- structi

31、on, materiais, dimensions, and toler- ances used in design of test equipment shall be so selected and controlled as to insure that the test equipment will permit positive rejection of a product which exceeds the prescribed tolerance limit, and will reliably indicate acceptability of a product which

32、does not exceed 90% of the prescribed tolerance limit. Construction shall be such as to facili- tate routine calibration of the equipment. equpmmt, 4.5 Test methods and procedures. 4.5.1 Storage temperature. The storage temperature for the plotting boards at minus 80 degrees and plus 160 degrees Fah

33、renheit shall be conducted in conformance with 3.4.1 and the “Test Facilities” of Specification MIL-F-13926. Upon return to standard am- bient temperature the plotting boards shall be subjected to a visual and tactile examina- tion and shall show no evidence of physical failure such as cracks, split

34、s, or warpage. The plotting boards shall then be subjected to all the tests specified herein. 4,5,2 Operating temperature. The tempera- ture cycling for the operability tests of the plotting boards at the specified temperature extremes shall be conducted in accordance with 3.4.2 and the Test Facilit

35、ies” of Speci- fication MIGF-13926. When the plotting boards are thermally stabilized at minus 40 degrees and plus 160 degrees Fahrenheit, respectively, they shaii be subjected to the operability tests specified in 4.5.6. 4.5.3 Plotting 8d.e ftatness. This test shall * .- . D 4 be performed by placi

36、ng the “11” graduation of the plotting scale at the center of the board, and measuring any variation in flat- ness at the “i” and “15” graduations of the scale with standard thickness gages. Any error in flatness shall not exceed the require- ments of 3.6. 4.5.4 ParaUelism. Parallelism of the grid l

37、ines in relation to the fiducial edge of the plotting scale shall be tested on the two grid lines which intersect through the center of the plotting disc. (Rotate the table 1600 mils to obtain alinement of the perpendicular grid line with the plotting scale.) Use a pocket optical comparator to check

38、 errors in paral- lelism. Errors shall not exceed the require- ments of 3.6. 4.5.5 Accuracy. The fiducial edge of the scale of the drafting machine shall be set to coincide with the north-south grid lines so that it can be moved back and forth across the plotting surface remaining parallel to its or

39、iginal position. With the fiducial edge of the scale in this position, a point shall be established approximately in the center of the plotting board. Using the grid squares as units of measure, a point shall be marked off 8,000 meters each side of the established cen- ter, on the east-west grid lin

40、e and a vertical line shall be drawn through each of these points. Rotate the grid plotting board 1600 mils in a clockwise direction following the same procedure on the new east-west grid line. Extend all lines to complete a square. Rotate plotting board counterclockwise 800 mils and draw a vertical

41、 line bisecting the square into two triangles. Rotate the plotting board counterclockwise 1600 mils and repeat performance. These new lines shall form a hypotenuse in compliance with 3.7 as meas- ured with the plotting scale. 4.5.6 Torque. This test shall be performed using a commercial type inch-po

42、und torque wrench with adapter to accommodate the slow motion knob. Readings with the torque wrench shall be taken in both directions while in motion. The torque required to rotate the slow motion knob at standard ambient tem- perature and at the extreme temperatures of Provided by IHSNot for Resale

43、No reproduction or networking permitted without license from IHS-,-,-._ - HIL-P-Y5605A 12 777990b 030823b 7 3.4.2 shall not exceed the values as specified in 3.8.1. 5. PREPARATION FOR DELIVERY 5.1 Packaging, packing, and marking. Pack- aging, packing, and marking shall be in ac- cordance vith Specif

44、ication MIL-P-14232 and the applicable Packaging Data Sheet. The level of protection shall be as specified in the procurement document, 6. NOTES 6.1 Intended use. Flash Ranging Plotting Boards M5A2E2 and M18 are used to deter- mine the location of hostile batteries by plotting the line of azimuth of

45、 the flash or Custodian: Arm y-MU f U.C. QOVERNMENT PRIHTINO OfIICEr 1066-70108tPOII6 MILP45605A (MU) smoke from the weapons as reported by two or more observation posts. Plotting Board MI8 may also be used for sound ranging through installation of a supplementary scale and index tabs. 6.2 Ordering

46、data. Procurement documents should specify the following: (a) Title, number, and date of this speci- fication. (b) Selection of applicable levels of preservation, packaging, and packing. (c) Applicable stock number. (a) Applicable Packaging Data Sheet (see 5.1). Preparing activity: Amy-MU Project No. 122-Al56Y 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-