ARMY MIL-P-2497 B-1963 PRIMER PERCUSSION M27 LOADING ASSEMBLING AND PACKING《M27式撞击引物的装药 组装和包装》.pdf

《ARMY MIL-P-2497 B-1963 PRIMER PERCUSSION M27 LOADING ASSEMBLING AND PACKING《M27式撞击引物的装药 组装和包装》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-P-2497 B-1963 PRIMER PERCUSSION M27 LOADING ASSEMBLING AND PACKING《M27式撞击引物的装药 组装和包装》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、11 SEPTEMBER 1963 SUPERSEDING 6 OCIY)BER 1%1 MIL-P-2497A (Om) MILITARY SPECIFICATION . d PRIMER, PERCUSSION, M27 .LOADING, ASSEMBLING AND PACIUNG 1. SCOPE 1.1 This specification covers the loading, as- sembling and packing for one type of primer designated 88 Primer, Percussion, M27. MIL-STW1235 -Si

2、ngle and Multilevel Continuoits Sampling. Procedures and Tables for Inepection by At- tributes. . 2. APPLICABLE Docmmn3 DBAWMCS 2.1 The following documente of the issue in effect on date of invitation for bids or request for proposals, form a part of th% specification to the extent specified herein,

3、 SPECIFICATIONS MILITABY MIL-A-2550 - Ammunition and Special Weapons ; General Specification for. MIL-1-45208 -Inspection Require- hNANCE COBPS 8837810 -Primer,-, Assembly. PUBLICATIONS ORDNANCE COBPG IEL-8837810 -Index of Inepection (Copies of epecilcati, etandards, mwiq and pub- lications required

4、 by suppiets in auinectian with specific procurement functions ahodd be obtained mm the pro- curing activity or m directed by the contracting otiicer.) Equipment Lista menta; General Speci- s. REQ- fication for. Supply and Mainte- mce of. MIL-1-45601 -mpection Equipment; 3.1 RateriaL Materiale shall

5、 be in accord- ance with applicable drawings and specificatiana. 3.2 prima. The primer ahall comply with aIl requirementa wed on Drawing (dwg) 8837810 and with aii reqii.ci ii;iiiiuiin (min.) when IcaLcd 2: : j c.ificd in U.1.1. 3.3.2 Duds. The primers Ehall fire without any indication of a failure

6、(see 6.61, when tesied a8 spccified in 4.3.1.2. 3.4 W6rkmanehip. All part6 and assemblies shall be fabricated and loaded in a thorough workmanlike manner. They shall be free of burrs, sbarp edges, cracka, dirt, rust, and other foreign matter. The cleaning method wed shall not be :injurious to my par

7、t nor hall the parts be con- taminated by the cleaning agent, AH required amrkings ahali be Beat and sharply defined. . I (a: A $!;,t. 1 . 1: CI-.t ;id! lu? c0111;!: : v:i,i, ai11 q:dit :i:marice irVEii:.t *. . ci I!:Q apprsvcd currcnt written descri1i:ioa ofthe sysiern. (b) Xumber of units of produ

8、ct inspcctcd. (c) Results obtained for all inspectiw pr- formed. (d) Drasing, Epccificntion number rind datc, together with an idcntification aiid date of changes, (e) Certificates of compliance on all mate- rial purchased by the contractor when such material ie controlled by Gov- ernment epeciiicat

9、ions referenced in any of the eonfrectual documents. . 4f) Number of iterne in the lot. (c QUALITY ASSUBANCE PROW.SONS (g) Datewibmitted. Udea otherwine specified in the contract or pur- ohase order, the mpplier ia responsible for the performaiiee Of a quiremen fid, the mipplier may utilise his own

10、or any- other inspection facilities and services acceptable to the Government. Iaspection records of the exami- . nations and tests shaii be kept complete and avdable to the Government sa apecified in the cuntract or order. The Government reserves the right to perform any of the inspections set fort

11、h in the specification where such inspections are deemed necemargr to assure that supplies and services conform to prescribed requirements. Reference dull be made to Standard MIHTD- 109 in order to define tem wed herein. The provieions of Specification MIL-A-2550 shall WPIY. The certificate shall be

12、 tS functioning test shall not vary from that epecified in 4.3.1. accordance with Specification hiIL-145308 and will be performed to the extent necessary to mure cornpliance with the contractual require- ment. Severity of Government inspection of indi- vidual characteristics wi be directly related t

13、o the seriousness of the classification assigned. In no instance will a characteristic classified “crit.i- cal” be accepted solely on the basis of the con- 41.2 hbrnh8ion of product. At the time the completed lot of product is submitted to the Gov- ernment for acceptance the contractor shall sup- pl

14、y the following information accompanied by a certificate which attests thtit the inforraat.Iqi provided is correct and applicabc to tic p; oduct being eubmittcd: tractors records. 4,2 Inspection 4.2.1 Lot jonnation, A lot. shall consist of primers produced by one iuaniiforturer in one urxkanged proc

15、css ir, accordant:. with tl:c s;imc d!-:n.irig, sanrc drcivi:; rc-:sc:; 6. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-v NIL-P-2477B 13 7779706 0293824 3 9 tion, and same specification revision. Drawing, specification, and process changea not aff

16、ecting safety, performance, or fit, as determined by the Government, shall not necessitate changing the lot interfix number, Each lot shall contain: (a) Parta bearing the same lot interfix num- ber from one manufacturer. (b) Primer mixture from one batch or blend- ing of batches which results in ho-

17、 mogeniety of ail primer mixture used in loading the entire primer lot. 42.2 Examination. Sampling plans and pro- cedures for the following classifications of defects shall be in accordance with Standard MIL-STD- 105 except that inspection for critical defects, when listed, shall be 100 percent. Con

18、tinuous sampling plans in accordance with Standard MIL-STD-1235 may be used if approved by the procuring activity. Also, at the option of the promiring activity, AQL?s and sampling plans may be applied to the individual characteristics listed using an AQL of 0% percent for each major defect and an A

19、QL of 0.40 percent for each minor defect. Equipment necessary for the per- formance of the inspections listed shail be in accordance with 42.4. . 42.2.1 Loaded cup (see.dwg. 8837810). Mathoti of CdcOorisi DSfdt upsc(im CodeNo. Criticai: None defined. Major : AC Ai ORDM-608-12. CDCF - Contractors des

20、ign responsi- bility on contractor format. OD -Ordnance design. ODMU -Ordnance design, mandatory for CE - Commercial equipment. SCD - Specification control drawing. 6.3.3 Ordnance designs. Ordnance designs are reflected on detailed drawings which completely depict all the information necessary for t

21、he fabri- cation of the item of inspection equipment. The contractor need provide no design when an Ord- nance design is listed for an item of inspection equirment. Ordnance designs fall inta two basic classifications; mandatory and nonmandatory. When an Inspection Equipment. List references mandato

22、ry Ordnance designs, the contractor shall comply with, and use these designs accordingly. The contractor may, however, in connection with nm-mandatory desjoie and with the approval of the Government, design alternate inspection equipment or use comparable commercial equip- ment to fxistatv his cgera

23、5cr;s. Sucfi contrador ?rcpered $signs or cornmexX equipment Qclec- . ic:zlz iziipi je approved 5:- tiif Cgyexrei. ;riar . use, MKLP-2497FJ (nlv) to fabrication or procuring of the equipment. Designs shall be submitted for approval as speci- fied in 6.3.7. 6.3.4 Specificat and the fact that the Gove

24、rnment may have formulated, furnished, or in any say supplied the eaid drawings, 8pecifications, or other data ia not to be regarded by implicafion or otherwise aa in any manner licensing the holder or any other person or corporation, or conveying any rights or permisaion to manufacture, use, or eel1 any patented invention that may m any way be related thereto. ,- a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-