ARMY MIL-DTL-3943 266 D-2008 DECORATION DISTINGUISHED CIVILIAN SERVICE AWARD INSPECTOR GENERAL DEPARTMENT OF DEFENSE《奖章 国防部总监杰出文职服务奖章》.pdf

《ARMY MIL-DTL-3943 266 D-2008 DECORATION DISTINGUISHED CIVILIAN SERVICE AWARD INSPECTOR GENERAL DEPARTMENT OF DEFENSE《奖章 国防部总监杰出文职服务奖章》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-3943 266 D-2008 DECORATION DISTINGUISHED CIVILIAN SERVICE AWARD INSPECTOR GENERAL DEPARTMENT OF DEFENSE《奖章 国防部总监杰出文职服务奖章》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、INCH-POUNDMIL-DTL-3943/266D 15 May 2008 SUPERSEDING MIL-DTL-3943/266C 10 May 2005 DETAIL SPECIFICATION SHEET DECORATION, DISTINGUISHED CIVILIAN SERVICE AWARD, INSPECTOR GENERAL, DEPARTMENT OF DEFENSE This specification is approved for use by all Departments and Agencies of the Department of Defense.

2、 The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3943. OBVERSE REVERSE MATERIAL: Not less than 85/15 Rich-Low Brass FINISH: Gold Plated, Matte Finished, Polished Highlights, and shall match The Institute of Heraldr

3、y (TIOH) Metal Finish Chip Number 8. DIMENSIONS: HEIGHT (including lug): 1-19/32 inches (REF) DIAMETER (without lug): 1-3/8 inches (REF) THICKNESS (at thickest point): 0.135 inch 0.010 inch AMSC N/A Page 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without lic

4、ense from IHS-,-,-MIL-DTL-3943/266D Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The lug shall have a 1/32 inch minimum thickness. The hole through the lug shall be 1/8 inch 1/64 inch in diameter 3. Decoration set shall consist of

5、 a regular size medal and a lapel button, both packaged in a presentation case conforming to MIL-C-14633, Type VIII, Style 6 with a Class 1, 1A, or 3 pad. 4. The ribbon for the pendant drape shall conform to MIL-DTL-11589/527. 5. The lapel button shall conform to MIL-DTL-11484/263. CHANGES FROM PREV

6、IOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautio

7、ned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH (Project No. 8455-2008-131) Review activities: DLA - CT NOTE: The activities listed ab

8、ove were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-