ARMY MIL-C-46411 B-1965 CARTRIDGE 4 2 INCH SMOKE WP M328A1 W FUZE PD M521 LOADING ASSEMBLING AND PACKING《 M328A1 4 2英寸WP烟幕弹W M521 PD引信的装载 组装和包装》.pdf

《ARMY MIL-C-46411 B-1965 CARTRIDGE 4 2 INCH SMOKE WP M328A1 W FUZE PD M521 LOADING ASSEMBLING AND PACKING《 M328A1 4 2英寸WP烟幕弹W M521 PD引信的装载 组装和包装》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-C-46411 B-1965 CARTRIDGE 4 2 INCH SMOKE WP M328A1 W FUZE PD M521 LOADING ASSEMBLING AND PACKING《 M328A1 4 2英寸WP烟幕弹W M521 PD引信的装载 组装和包装》.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、s-37-clr - MIL-4bq11B 13 M 7777906 0311850 7 W. - _ iK-C:$GPllB (MU) 23 APRIL 1965 SUPERSEDING (SEE 6.6) MIL-C-46411A (MU) 31 MAY 1963 MILITARY SPECIFICATION CARTRIDGE, 4.2 INCH, SMOKE, WP, M328A1, W/FUZE, PD, M521, LOADING, ASSEMBLING AND PACKING 1. SCOPE 1.1 This specification covers the loading,

2、assembling and packing for one type of smoke cartridge designated as M328A1, for use with 4.2 Inch Mortars. 2. APPLXCABLE DOCURIENTS 2.1 The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified he

3、rein. SPECIFICATIONS MILITARY MIL-A-2550 - Ammunition and Spe- cial Weapons; Gen- eral Specification for MIL145607 - Inspection Equipment, Supply and Mainte- nance of STANDARDS MILITARY MIGSTD-105 - Sampling Procedures and Tables for In- spection by Attri- butes (ABC-STD- 106) MIL-STD-109 -Quality A

4、ssurance Terms and Defini- tiOnS MIL-STD-1236- Single and Multilevel Continuous Sam- pling Procedures and Tables for In- - spection by Attri- butes DRAWINGS ORDNANCE Coam 7649247 - Container, Fiber M251 for 4.2 Inch Mortar Ammunition, As- sembly Details and Packing 7549248 -Box, Packing, Ammu- nitio

5、n for 4.2 Inch Mortar Ammuni- tion, Assembly De- tails and Packing 8797829 -Cartridge, 4.2 Inch WP, Smoke M328A1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MfLC46411B (MU) PUBLICATIONS ORDNANCE CORPS IEL-8797829 -Index of Inspection (Copies of s

6、pecifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) Equipment Lists 3.3.4 Deluzjed functioning. There shall be no evidence of delayed fun

7、ctioning of the projectile upon impact. 3.3.5 Premature functioning and security of parts. There shall be no premature burst OP metal parts failure in the bore of the weapon, or in flight before impact. 3.4 Workmaiiship 3. REQUIREMENTS 3.1 Material. Materials shall be in accord- ance with applicable

8、 drawings and specifi- cations. 3.2 Cartridges. The cartridge shall com- ply with all requirements specified on Draw- ing (dwg.) 8797829, and with all require- ments specified in applicable specifications. 3.3 Proving ground. The cartridge shall comply with the following requirements when .tested as

9、 specified in 4.3.1. 3.3.1 Failwe to $ye. The cartridge shall not faii to fire. 3.3.2 Impact functioning. There shall be visible evidence of functioning upon impact as indicated by presence of a flash or smoke cloud (see 6.5). . . . 3.3.3 Horizontal range 3.3.3.1 No cartridge shall have- a horizon-

10、tal range less than 90 percent of the average horizontal range. . 3.3.3.2 The standard deviation in horizon- tal range shall be no greater than the maxi- mum lot .values shown in table for the charge value indicated. , TABLEI Na MILC4641B (MU) CE - Commercial equipment, SCD -,Specification control d

11、raw- ing. 6.3.3 Army designs. Army designs are re- flected on detailed drawings which com- pletely depict all the information necessary for the fabrication of the item of inspection equipment. The contractor need provide no design when an Army design is listed for an item of inspection equipment. Ar

12、my de- signs fall into two basic classifications, mandatory and nonmandatory. When an in- spection equipment list references manda- tory Army designs, the contractor shall comply with, and use these designs accord- ingly. The contractor may, however, in con- nection with nonmandatory designs and wit

13、h the approval of the Government, de- sign alternate inspection equipment or use comparable commercial equipment to facili- tate his operations. Sueh contractor pre- pared designs or commercial equipment selections must be approbed by the Gov- ernment prior to fabrication or procuring of the equipme

14、nt, Designs shall be submitted for approval as specified in 6.3.7. 6.3.4 Speciation control dmwing. Speci- fication control drawings depict the mini- mum equipment requirements in outline, descriptive, diagrammatic or pictorial form only and specify the required performance or other characteristics.

15、 Contractors must prepare detailed drawings (see 6.3.6) of their designs in support of specification control drawings. These contractor pre- pared designs must be approved by the Government prior to the fabrication or pro- curing of the equipment. Commercial equip- ment meeting the requirements of s

16、pecifica- tion control drawings may be approved if described in suficient detail to permit iden- tification and evaluation by the Government. Designs shall be submitted for approval as specified in 6.3.7“. 6.3.5 Commercial equipment. Commercial equipment is inspection equipment that has universal ap

17、pliation for a specific function. It is comprised of items commonly used by industry and Government. Contractors are not required to furnish drawings of com- mercial inspection equipment, but a list of such equipment must be approved by the Government. Lists shall be submitted for ap- proval to the

18、inspection element of the agency administering the contract. 6.3.6 Contractoy designs. Contractor de- signs are designs of inspection equipment for which the Government has assigned de- sign responsibility to the contractor. Con- tractor designs shall be supported by de- tailed drawings which depict

19、 all informa- tion necessary to completely fabricate, cali- brate and operate an item of inspection equipment. This requires that the necessary views, dimensions, materials, finish, notes, operating and calibration instructions be properly depicted in accordance with ap- proved practices to the exte

20、nt that further calculation or clarification will not be re- quired. Contractor designs identified as CDGF may be developed on the format the contractor normally employs in his equip- ment design procedure provided such format reflects the detail and information specified above. Contractor designs i

21、dentified as CDAF shall comply with the format and requirements of MIL-D-45608, and in addi- tion, contain the detail and information specified above. Final approved contractor designs identified as CDCF shall be suita- ble for microfilming, They must be non- reproducible diazo or electrostatic prin

22、ts of top quality full size with black line on white background and shall provide a legible print produced via the 35mm microfilm process. Contractor shall submit one copy of the final design as a rolled set or flat set. 6.3.7 Submssion of contractor deszgns. Designs shall be submitted for approval

23、to the Commanding Officer, Picatinny Arsenal, AITN :. , SMUPA-ND. Design review nor- mally will be accomplished within one month after receipt by Picatinny Arsenal. Partial submission of inspection equipment designs is permissible and encouraged. However, Provided by IHSNot for ResaleNo reproduction

24、 or networking permitted without license from IHS-,-,-the Arensal completion date for design re- view will be based on the date of the final submission of designs. 6.4 Cost of check test. The contracting offi- cer shall arrange for the contractor to be reimbursed for the expense incurred in the perf

25、ormance of the check tests. The test shall be conducted at Government expense without cost to the contractor who loaded the ignition cartridges or to the contractor assembling the cartridge, and shall not con- stitute a basis for rejection against either contractor, except where deterioration has oc

26、curred as a direct result of carelessness in handling, storage, etc., permitted while the ignition cartridge lot was under the jur- isdiction of either contractor. 6.5 Impact functioning. The cartridge shall function with sufficient fragmentation of the Custodian: Army-MU M.IEC-46.411B (MU) projecti

27、le to adequately disperse the chem- ical. 6.6 Supersession data. The specification supersedes in part MIL-S-11354A (Ord) , 27 May 1960, covering Shell, WP, M2, M2 alt, MZAl, M2A1 alt, E84R7 (M328) and E84R7 alt (M328B) ; Shell, HE, M3A1, M3A1 alt, M329 and M329E1 w/Fuze for Mortar, 4.2 Inch ; Loadin

28、g, Assembling, Marking and Packing. 6.7 Submission of test data. In addition to the normal distribntion of records, when the cartridge is procured by the Department of the Army, one copy of all test data shall be forwaded to each of the following: Commanding Officer Picatinny Arsenal ATTN; SMUPA-ND2 and SMUPA- Dover, N.J. DC8 Preparing activity: Arm y-MU Project Number 1315-A444 11 * U. S. GOVERNMNT PRINTING OFFICE: 201-06&1966 (V-269) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-