ARMY A-A-52496-1994 HOOK TOWING MEDIUM (FOR VEHICLES 13 TO 36 METRIC TONNES) (METRIC)《公制(13至36公吨)中号车辆的拖车钩》.pdf

《ARMY A-A-52496-1994 HOOK TOWING MEDIUM (FOR VEHICLES 13 TO 36 METRIC TONNES) (METRIC)《公制(13至36公吨)中号车辆的拖车钩》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-52496-1994 HOOK TOWING MEDIUM (FOR VEHICLES 13 TO 36 METRIC TONNES) (METRIC)《公制(13至36公吨)中号车辆的拖车钩》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-52496 9999974 OLb5264 04 METRIC A-A-52 49 6 August 3, 1994 SUPERSEDING MS 5 00038A 16 February 1978 COMMERCIAL ITEM DESCRIPTION HOOK, TOWING: MEDIUM (FOR VEHICLES 13 TO 36 METRIC TONNES) (METRIC) The General Services Administration has authorized the use of this Commercial Item Description (CID)

2、 for all federal agencies. 1. SCOPE. This CID covers the requirements for a medium towing hook which is used for towing vehicles weighing 13 to 36 metric tonnes. The hook interfaces with towing lug which is attached to the vehicle to be towed. 2. SALIENT CHARACTERISTICS. 2.1 Materials. Materials sha

3、ll be made of forging alloy steel in accordance with Unified Numbering System (UNS) H41400 to H41500, H43370, H43400, H51400 to H51500, H86400 to H86500, H87400, and H87420. The use of recovered materials made in compliance with regulatory requirements is acceptable providing that all requirements o

4、f this CID are met (see 5.5). 2.2 Heat treatment. The hooks shall be quenched, tempered, and hardened to 271-327 Brinell Hardness Number (BHN). 2.3 Design and construction. Hooks shall be designed and constructed in accordance with figure 1 or suitable interchangeable towing hook. 2.4 Finish. The ho

5、oks shall be finish treated in accordance with Chemical Agent Resistant Coating (CARC) painting procedure specified in Army Drawing 12369003. The top coat color shall be green 383. Beneficial comments, recommendations, additions, deletions clarifications, etc. and any other data which may improve th

6、is document should be sent by letter to: U.S. Army Tank-Automotive Command, ATTN: AMSTA-GLC, Warren, MI 48397-5000. FSC 2540 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS

7、-,-,-A-A-5249b = 7997774 0365265 740 A-A- 52 496 88.9 v 46.02 k.38 + 95.3 I X.L3 Former Former DIA LINE NOTES : 1. Dimensions are in millimeters. UnleSS otherwise specified, 2. 3. The use of asterisks (*) indicates international interests forging tolerance is + 1.6 and maximum draft angle is 70. All

8、 machined surfaces-shall be 3.2 micrometers where roughness symbol J is shown. All burrs and sharp edges shall be removed. (see 5.4). FIGURE 1. Hook towina. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52496 9999774 0365266 687 A-A-52 49 6 2

9、.5 Identification and marking. Identification and marking shall be permanent and legible and as a minimum shall include the part identification number (PIN), A52496-1, the manufacturers CAGE code (or equivalent identification), the manufacturers part number, a steel heat code and foundry trademark.

10、3. QUALITY ASSURANCE PROVISIONS. 3.2 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests). 3.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salien

11、t characteristics of this CID and that the product conforms to the producers own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such con

12、formance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4. PRESERVATION, PACKAGING, PACKING, LABELING, AND MARKING. Preservation, packaging, packing, labeling and marking for the desired level shall be as specified in the contract (s

13、ee 5.2). 5. NOTES. (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 5.1 Addresses for obtaining copies of Army drawing. Copies of Army Drawing 12369003 “Paint Systems for Steel, Exterior Surfaces, Green 383“ are available from the Cont

14、racting Officer, U.S. Army Tank-Automotive Command, Warren, MI 48397-5000. 5.2 Ordering data. Acquisition documents must specify the following: a. Title, number, and date of this CID. b. PIN and quantity required. c. Selection of applicable level and packaging requirements. d. Issue of Department of

15、 Defense Index of specifications and Standards (DODISS) to be cited in the solicitation, and if required, the specific issue of individual documents referenced. 5.3 Cross reference data. Hooks acquired to this CID are substitutable/ interchangeable with hooks conforming to MS500038A. 5.4 Internation

16、al standardization agreements. Figure 1 dimensions marked with an asterisk (*) are congruent with corresponding dimensions for the MS500004 towing lug which is the subject of international standardization agreements North Atlantic Treaty Organization 4019 and American, British, Canadian - Army-STD-1

17、32. When amendment, revision, or cancellation of this CID is proposed that will modify the the international agreement concerned, the preparing activity will take appropriate action through international standardization channels, including departmental standardization offices, to change the agreemen

18、t or make other appropriate accommodations. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52496 m 9999974 0365267 533 A-A- 52 49 6 5.5 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with

19、 Public Law 94-580 to the maximum extent practicable. MILITARY INTERESTS: Custodian Army - AT Review Activity DLA - CS CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTIVITY: Army - AT (Project 2540-0409) User Activity Navy - MC 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-