ANSI Z245.60-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Compatibility Dimensions (NW&RA)《废弃物和可回收材料用设备的技术和运行.废弃物容器.兼容尺寸》.pdf

《ANSI Z245.60-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Compatibility Dimensions (NW&RA)《废弃物和可回收材料用设备的技术和运行.废弃物容器.兼容尺寸》.pdf》由会员分享，可在线阅读，更多相关《ANSI Z245.60-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Compatibility Dimensions (NW&RA)《废弃物和可回收材料用设备的技术和运行.废弃物容器.兼容尺寸》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、 American National Standard ANSI Z245.60 - 2008 ENVIRONMENTAL INDUSTRY A S S O C I A T I O N S for Equipment Technology and Operations for Wastes and Recyclable Materials - Waste Containers Compatibility Dimensions ANSI Z245.60 - 2008 WASTE EQUIPMENT TECHNOLOGY ASSOCIATION A PART OF THE ENVIRONMENTA

2、L INDUSTRY ASSOCIATIONS 4301 CONNECTICUT AVENUE, NW SUITE 300 WASHINGTON, DC 20008 TELEPHONE: 202-244-4700 FAX: 202-966-4824 American National Standard for Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Compatibility Dimensions Secretariat Environmental Indu

3、stry Associations Approved January 15, 2008 American National Standards Institute, Inc. American National Standard Approval of an American National Standard requires verification by the American National Standards Institute (ANSI) t hat the requirements for due process, consensus, and other criteria

4、 for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not ne

5、cessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the stand

6、ards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. ANSI does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or auth

7、ority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. NOTE: This American National Standard may

8、be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing

9、ANSI. Published by Waste Equipment Technology Association (Part of Environmental Industry Associations) 4301 Connecticut Avenue, NW, Suite 300 Washington, DC 20008 Copyright 2008 by Environmental Industry Associations All rights reserved. No part of this publication may be reproduced in any form, in

10、 electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America AMERICAN NATIONAL STANDARD ANSI Z245.60 - 2008Table of Contents Page Foreword (informative)ii 0 Introduction (informative) .1 1 Scope.1 2 Normative references.5 3 Def

11、initions.5 4 Safety requirements.7 5 Markings7 6 Responsibilities8 7 Dimensional requirements 9 Figures 1a Typical Refuse containers2 1b Typical Refuse containers3 2 Refuse containers excluded.4 3 Type B container 11 4 Type B container lifter attachment points.12 5 Type C container14 6 Type D contai

12、ner16 7 Type G container18 8 Type T container (2.3 cubic meters or less).20 9 Type T container (more than 2.3 cubic meters) .22 10 Type U container25 11 Type */C container26 12 Type H container28 13 Type I container31 14 Type I container stops and detents detail.32 15 Type L container.34 16 Type S c

13、ontainer 37 Tables 1 Dimensional requirements for Type B containers 9 2 Dimensional requirements for Type C containers 13 3 Dimensional requirements for Type D containers 15 4 Dimensional requirements for Type G containers17 5 Dimensional requirements for Type T containers (2.3 cubic meters or less)

14、 .19 6 Dimensional requirements for Type T containers (More than 2.3 cubic meters)21 7 Dimensional requirements for Type U containers 23 8 Dimensional requirements for Type */C containers26 9 Dimensional requirements for Type H containers 27 10 Dimensional requirements for Type I containers29 11 Dim

15、ensional requirements for Type L containers.33 12 Dimensional requirements for Type S containers 35 iAMERICAN NATIONAL STANDARD ANSI Z245.60 - 2008FOREWORD (This foreword is not part of American National Standard Z245.60 - 2008) This revised standard replaces ANSI Z245.60 1999, Equipment Technology

16、and Operations for Wastes and Recyclable Materials Waste Containers Compatibility Dimensions. For a waste container to be marked as a specific type of container, those containers manufactured after the effective date of this standard, must comply with ANSI Z245.60-2008. This revision establishes dim

17、ensions for refuse containers commonly used in conjunction with mobile equipment used to collect, compact and transport waste and recyclables, and occasionally with stationary waste processing and compaction equipment that use mechanical means to lift and empty these containers into the loading hopp

18、er. It is intended to assist manufacturers of truck bodies and lifting equipment in designing devices that can safely accommodate a wide range of commonly used containers. Also, labeling according to this standard will assist the users of such equipment in identifying with certainty that a container

19、 so marked is compatible with a lifting device designed to accommodate containers of the same type. It is recognized that individuals may prefer to use containers that do not conform to these dimensions, and that such specialty designs can be safely handled by certain lifting systems. The standard d

20、oes not intend to restrict manufacturing or the use of other designs. This standard is intended to encourage widespread use of common dimensions to facilitate interchange of different manufacturers product lines, and create an easily recognizable means for waste industry workers to safely match cont

21、ainers and lifting devices. The effective date of this standard will be 18 months after the date of approval by the American National Standards Institute. Containers manufactured prior to the effective date of this standard are subject to the requirements of previous editions of ANSI Z245.60 (1999,

22、1996, 1990) For Refuse Collection, Processing, and Disposal Equipment Waste Containers Compatibility Dimensions. Many containers manufactured prior to this standard may also meet the requirements of the dimensional specifications for the various types of containers. Employers are encouraged to ident

23、ify and label such containers as described in this standard in order to assist employees in determining compatibility with lifting systems. To gain access to a larger variety of lifting equipment types, manufacturers may choose to design containers to meet the dimensional requirements of more than o

24、ne container type. In such a case they may label these containers for each type for which the requirements are met. This revised standard was developed by the Accredited Standards Committee (ASC) Z245 Subcommittee 6 (Container Compatibility). In addition to the subcommittee members, the original sta

25、ndard was developed by the following organizations: the Transportation and Container Project Working Groups of the Waste Equipment Technology Association (WASTEC) and independent manufacturers of refuse containers. At the time this revised standard was approved, a number of commonly used types of co

26、ntainers were included for which consensus was reached regarding common dimensions critical to assuring compatibility with lifting systems. The ASC Z245 Committee will include other container types that may be developed in the future, and others for which consensus has not yet been reached on dimens

27、ional requirements in future revisions of this standard. Proposals should be forwarded to the Secretary of the ASC Z245 Committee. Suggested changes, inquiries, and requests for interpretation of this standard should be directed to the Secretary, Accredited Standards Committee Z245, c/o Environmenta

28、l Industry Associations, 4301 Connecticut Ave., NW, Suite 300, Washington, DC 20008. ii AMERICAN NATIONAL STANDARD ANSI Z245.60 - 2008This revised standard was processed and approved for submittal to ANSI by the Accredited Standards Committee on Equipment Technology and Operations for Wastes and Rec

29、yclable Materials, Z245. Committee approval of this standard does not necessarily imply that all committee members voted for its approval. At the time it approved this revision, the Z245 Committee had the following members: Gary Satterfield, Chairman Craig Wallwork, Secretary Lou Guilmette City of R

30、ochester Karon Simoni (Alternate) City of Rochester Carl Hursh Commonwealth of Pennsylvania DEP Gary Satterfield Waste Equipment Technology Association John Gilstrap Institute of Scrap Recycling Industries, Inc. Brent Dieleman Solid Waste Association of North America Paul Moore NIOSH Ralph A. Ford W

31、aste Industries Michael L. Knaub Schaefer Systems International, Inc. Jerald G. Zanzig Zantec, Inc. Denny Gill Ameri-Kan Thomas Stevens Wolverine Recycling Services, Inc. Denny Pool SP Industries, Inc. Steven M. Wienkes Environmental Equipment Solutions David E. Malter Malter Associates, Inc. W.A. M

32、artin Waste Management, Inc. Susan Eppes EST Solutions, Inc. Gerald Van Beek SACOM Safety Communications Jeffrey D. Kaplan City of Corpus Christi Mark Johnson (Alternate) Allied Waste Industries, Inc. Garry Mosier, CSP Allied Waste Industries, Inc. Mike Schwalbach Rehrig Pacific Company Dave Carlisl

33、e City of Tacoma iiiAMERICAN NATIONAL STANDARD ANSI Z245.60 - 2008iv ASC Z245 Subcommittee 6 (Container Compatibility), which drafted this revised standard, had the following members: Denny Gill, Chairman Phillip Headley, Secretary Elizabeth Alfaro Neil Allison Gaetan Bolduc Kathy Bolhouse Joe Bollo

34、 Pamela Brant Bruce Clark Steve David Dale Deist Dennis Dorr Charles Duell Susan Eppes Gary Fleming John Ford Bill Geise Steve Ginter Steve Gustin Odis Hamill Larry Hanska Shannon Harrop Larry Horning Chad Johnson Mark Johnson Mike Knaub Dan Lynch W. A. Martin Bob McClain Ron McCracken Gary McLeskey

35、 Rock Nolet Fran Oliver Jerry Ooten Roger Oukrop Tim Perkins Jim Pickett Denny Pool Greg Pugh Robert Riethmiller Jim Roseberry Gary Satterfield Mike Schwalbach Tom Shearer Kent Spiers Jerry Van Beek Jim Vlaanderen Hans Vooys Kevin Weaver Steve Wienkes Mark Williams Jerry Zanzig Dave Zrostlik AMERICA

36、N NATIONAL STANDARD ANSI Z245.60 - 2008American National Standard for Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Compatibility Dimensions 0 Introduction This standard was developed by American National Standards Institute Accredited Standards Committee Z

37、245 Subcommittee 6 on Container Compatibility and approved by Accredited Standards Committee Z245. This standard revises the waste container compatibility dimensions found in ANSI Z245.60-1999 by providing specific dimensions for waste containers. This standard complements ANSI Z245.30-2008, which d

38、etails the safety requirements for waste container construction and use. Exceptions and notes contained in the standard apply to the clause or sub-clause in which they are contained or to which they reference. Exceptions pertain to normative requirements. Notes are informative and provide guidance f

39、or the evaluation of a normative requirement. The units of distance measurement used in this standard are in the inch-pound system. When a value for measurement is followed by a value in other units in parentheses, the second value is only approximate. The first value is the requirement. 1 Scope 1.1

40、 This standard applies to newly manufactured containers that are used in conjunction with the collection, processing and disposal (including the diversion of wastes for recycling) of municipal, commercial and industrial solid wastes by private companies and public entities. Containers may vary widel

41、y as to size, design and other characteristics. These containers are used in conjunction with mobile and stationary equipment that use mechanical means to handle the containers. Containers not in conformance with this standard may be safely handled provided the mechanism used is compatible with the

42、dimensions of the specific container. Figures 1a and 1b illustrate examples of various types of containers which are within the scope of this standard. 1.2 This standard does not apply to containers intended for use by householders for their individual use which are not to be handled by mechanical c

43、ontainer lifting and dumping mechanisms. Figure 2 illustrates examples of various types of containers which are not within the scope of this standard. 1.3 This standard applies to mobile containers usually mounted on casters or wheels; stationary containers with 3 cu. yd.3(2.3 cubic meters) capacity

44、 and larger; and specially designed containers 1AMERICAN NATIONAL STANDARD ANSI Z245.60 - 2008integral with or detachable from stationary compactors. NOTE: Containers may have hinged lids or access doors which vary as to the number of panels, size, use and location. Figure 1a Typical refuse containe

45、rs within the scope of this standard 2 AMERICAN NATIONAL STANDARD ANSI Z245.60 - 2008Figure 1b Typical refuse containers within the scope of this standard 3AMERICAN NATIONAL STANDARD ANSI Z245.60 - 2008Figure 2 Typical refuse containers excluded from this standard 4 AMERICAN NATIONAL STANDARD ANSI Z

46、245.60 - 20082 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreeme

47、nts based on this American National Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI Z245.1-2008, Equipment Technology and Operations for Wastes and Recyclable Materials - Mobile Wastes and Recyclable Materials Collect

48、ion, Transportation and Compaction Equipment - Safety Requirements ANSI Z245.21-2008, Equipment Technology and Operations for Wastes and Recyclable Materials - Stationary Compactors - Safety Requirements ANSI Z245.30-2008, Equipment Technology and Operations for Wastes and Recyclable Materials - Was

49、te Containers - Safety Requirements 3 Definitions 3.1 General definitions. Except as provided below, terms used in conjunction with this standard are defined in ANSI Z245.30-2008. 3.2 Type B container: Type B containers are designed and manufactured to be cycled by a “bar-lock” lifter. Type B containers have geometry in the area where it attaches to a lifter that is functionally equivalent to Figures 3 and 4. The generic specification for Type B containers is based on the concept of envelopes, cross sections within which the upper attachment p