ANSI Z245.30-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Safety Requirements (NW&RA)《废弃物和可回收材料用设备技术和运行的美国国家标准.废弃物容器.安全要求》.pdf

《ANSI Z245.30-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Safety Requirements (NW&RA)《废弃物和可回收材料用设备技术和运行的美国国家标准.废弃物容器.安全要求》.pdf》由会员分享，可在线阅读，更多相关《ANSI Z245.30-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Safety Requirements (NW&RA)《废弃物和可回收材料用设备技术和运行的美国国家标准.废弃物容器.安全要求》.pdf（45页珍藏版）》请在麦多课文档分享上搜索。

1、 American National Standard ANSI Z245.30 - 2008 ENVIRONMENTAL INDUSTRY A S S O C I A T I O N S for Equipment Technology and Operations for Wastes and Recyclable Materials - Waste Containers Safety Requirements ANSI Z245.30 - 2008 WASTE EQUIPMENT TECHNOLOGY ASSOCIATION A PART OF THE ENVIRONMENTAL IND

2、USTRY ASSOCIATIONS 4301 CONNECTICUT AVENUE, NW SUITE 300 WASHINGTON, DC 20008 TELEPHONE: 202-244-4700 FAX: 202-966-4824 American National Standard for Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Safety Requirements Secretariat Environmental Industry Assoc

3、iations Approved January 15, 2008 American National Standards Institute, Inc. American National Standard Approval of an American National Standard requires verification by the American National Standards Institute (ANSI) t hat the requirements for due process, consensus, and other criteria for appro

4、val have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily

5、unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or no

6、t, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. ANSI does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to i

7、ssue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. NOTE: This American National Standard may be revised

8、 or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing ANSI. Publ

9、ished by Waste Equipment Technology Association (Part of Environmental Industry Associations) 4301 Connecticut Avenue, NW, Suite 300 Washington, DC 20008 Copyright 2008 by Environmental Industry Associations All rights reserved. No part of this publication may be reproduced in any form, in electroni

10、c retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 iTable of Contents Page Foreword (informative)iii 0 Introduction (informative) . 1 1 Scope. 1 2 Normative references. 5 3 Definitio

11、ns. 5 4 Construction, installation, reconstruction, and modification 4.1 Design 10 4.2 Markings. 10 4.3 Installation of containers and lifters 11 4.4 Reconstruction and repair 11 4.5 Modification 11 5 Manufacturer/rebuilder/modifier responsibilities 5.1 Documented instructions 11 6 Employer, owner,

12、and other users responsibilities for containers 6.1 Employee responsibilities for all containers . 11 6.2 Operator or employee responsibilities for all containers 15 7 Technical requirements 7.1 General safeguards and features. 17 7.2 Safeguards and features for specific container types 21 Appendice

13、s (normative) A Volumetric loading capacity test methods for carts 29 B Slope stability test method for carts . 30 C Durability during pulling test for carts . 31 D Loading and unloading test for carts 32 E Center-of-balance position test for carts 33 F Force to tip test for carts. 34 G Lid test for

14、 carts 35 Annex A Bibliography (informative) 36 AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 ii Figures 1a Typical refuse containers . 2 1b Typical refuse containers . 3 2 Refuse containers not included 4 3 Roll-off/hoist type equipment 10 4 Container wheelbase 10 5 Markings for containers three met

15、ers or greater 14 6 Markings for containers less than three meters . 14 7a Container label (caution, falling hazard). 19 7b Container label (caution, falling hazard). 19 7c Container label (warning, striking hazard) 20 8 Typical four-wheeled or slant-sided containers 23 9 Shift of load center of gra

16、vity in four-wheeled containers. 24 10 Conditions for testing in most unstable condition. 25 11 Approximate location of safety markings 26 12 Container safety sign 31AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 iiiFOREWORD (This foreword is not a part of American National Standard Z245.30-2008.) Thi

17、s standard establishes general safety requirements for all waste containers commonly used in the collection, processing and disposal of solid wastes, in residential, commercial and industrial applications. These containers may also be used in conjunction with both mobile and stationary lifting, dump

18、ing, and transportation technologies. This standard is intended to assist manufacturers, installers, modifiers, service organizations, owners, employees and the general public in the production, maintenance, and use of equipment and is protective of persons whose activities may require them to use o

19、r otherwise come in contact with these containers. This standard was developed by Z245. Subcommittee on Container safety In addition to the subcommittee members, the following organizations also participated in the preparation of this standard: the Container, Mobile Equipment, and Processing Equipme

20、nt Committees of the Waste Equipment Technology Association (WASTEC) and independent manufacturers of waste containers. This standard replaces ANSI Z245.30-1999, For Refuse Collection, Processing, and Disposal Equipment Waste Containers Safety Requirements, through incorporation of the requirements

21、of that standard into the clauses of this new document. Equipment manufactured in accordance with the earlier document will comply with the stability provisions of this document. Because of the difficulty of changing manufacturers production lines to incorporate the provisions that are either new or

22、 are revisions of clauses of ANSI Z245.30-1999, the following effective dates have been established by the Accredited Standards Committee Z245: - the provisions of this standard shall apply to all newly manufactured containers and two-wheeled cart lifting systems manufactured twelve (12) months afte

23、r this standard is approved by the American National Standards Institute; - for all existing containers and two-wheeled cart lifting systems manufactured during the period of October 20, 2000 until 12 months after the approval date of this standard, the provisions of ANSI Z245.30-1999 shall apply; -

24、 for all existing containers and two-wheeled cart lifting systems manufactured during the period of May 12, 1995 until October 20, 2000, the provisions of ANSI Z245.30-1994 shall apply; - for all existing containers and two-wheeled cart lifting systems, regardless of the date of manufacture, the pro

25、visions of the following clauses shall apply 12 months after the approval date of this standard: Clauses 4.3, 4.4, and 4.5, and Clause 6 and all of its sub-clauses. Four-wheeled or slant-sided refuse bins manufactured or in use prior to May 12, 1995 are subject to the requirements of ANSI Z245.3-197

26、7(R1990), Safety Requirements for the Stability of Refuse Bins. Inquiries, requests for interpretation, and suggestions for the improvement of this standard should be directed to the Secretary, Accredited Standards Committee Z245, c/o Environmental Industry Associations, 4301 Connecticut Ave., NW, S

27、uite 300, Washington, D.C. 20008. AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 iv This standard was processed and approved for submittal to ANSI by the Accredited Standards Committee Z245 for Equipment Technology and Operations for Wastes and Recyclable Materials. Committee approval of this standard

28、 does not necessarily imply that all members of the committee voted for its approval. At the time it approved this standard, the Z245 Committee had the following members: Gary Satterfield, Chairman C. Phillip Headley, Secretary Lou Guilmette City of Rochester Karon Simoni (Alternate) City of Rochest

29、er Carl Hursh Commonwealth of Pennsylvania DEP Gary Satterfield Waste Equipment Technology Association John Gilstrap Institute of Scrap Recycling Industries, Inc. Brent Dieleman Solid Waste Association of North America Paul Moore NIOSH Ralph A. Ford Waste Industries Michael L. Knaub Schaefer Systems

30、 International, Inc. Jerald G. Zanzig Zantec, Inc. Denny Gill Ameri-Kan Thomas Stevens Wolverine Recycling Services, Inc. Denny Pool SP Industries, Inc. Steven M. Wienkes Environmental Equipment Solutions David E. Malter Malter Associates, Inc. W.A. Martin Waste Management, Inc. Susan Eppes EST Solu

31、tions, Inc. Gerald Van Beek SACOM Safety Communications Jeffrey D. Kaplan City of Corpus Christi Mark Johnson (Alternate) Allied Waste Industries, Inc. Garry Mosier, CSP Allied Waste Industries, Inc. Mike Schwalbach Rehrig Pacific Company Dave Carlisle City of Tacoma AMERICAN NATIONAL STANDARD ANSI

32、Z245.30 2008 vThe Z245 Subcommittee 3, which drafted this standard, had the following members: Dennis Gill, Chairman Phillip Headley, Secretary Elizabeth Alfaro Gaetan Bolduc Joe Bollo Pamela Brant Bruce Clark Kevin Coombes Steve David Dale Deist Susan Eppes Gary Fleming John Ford Bill Geise Steve H

33、arrison Shannon Harrop Arnold Heuzen Larry Horning Chad Johnson Mark Johnson Dave Klinger Michael Knaub Mike Lynn W. A. (Billy) Martin Bob McClain Ron McCracken Fran Oliver Rock Nolet Roger Oukrop Tim Perkins Jim Pickett Keith Pinson Denny Pool Greg Pugh Robert Rasmussen Jim Roseberry Gary Satterfie

34、ld John Satterwhite Mike Schwalbach Tom Shearer Kent Spiers Jerry Van Beek Jean Pierre Serrault Hans Vooys Kevin Weaver Steve Wienkes Bob Wyman Jerry Zanzig Dave Zrostlick AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 vi This page blank AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 1American National

35、Standard for Equipment Technology and Operations for Wastes and Recyclable Materials Waste Containers Safety Requirements 0 Introduction This standard was developed by American National Standards Institute Accredited Standards Committee Z245 Subcommittee 3 on Waste Container Safety and approved by A

36、ccredited Standards Committee Z245. This standard revises the waste container safety requirements found in ANSI Z245.30-1999 by providing specific requirements for construction and use of waste containers in solid waste and recycling operations. This standard complements ANSI Z245.60-2006, which det

37、ails the dimensions of waste containers to assist in the compatibility of waste containers and the vehicles employed in the collection and lifting operations associated with specific containers. Exceptions and notes contained in the standard apply to the clause or sub-clause in which they are contai

38、ned or to which they reference. Exceptions pertain to normative requirements. Notes are informative and provide guidance for the evaluation of a normative requirement. The units of distance measurement used in this standard are in the inch-pound system. When a value for measurement is followed by a

39、value in other units in parentheses, the second value is only approximate. The first value is the requirement. 1 Scope 1.1 This standard establishes safety requirements with respect to the manufacture, reconstruction, use, modification, maintenance, service, operation, and installation (where applic

40、able) of containers, two-wheeled carts, and two-wheeled cart lifters. This standard is applicable to all persons engaged in the manufacture, modification, operation, use cleaning, maintenance, service or repair of containers and cart lifters which are used in conjunction with the collection, process

41、ing and disposal (including the diversion of wastes for recycling) of municipal, commercial and industrial solid wastes by private companies and public entities. Containers may vary widely as to size, design and other characteristics. Figures 1a and 1b illustrate examples of various types of contain

42、ers which are in the scope of this standard. 1.2 This standard does not apply to containers intended for use by householders for their individual use which are not to be handled by mechanical container lifting and dumping mechanisms. Figure 2 illustrates examples of various types of containers which

43、 are not covered by the scope of this standard. AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 2 Figure 1aTypical refuse containers within the scope of this standard AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 3Figure 1bTypical refuse containers within the scope of this standard AMERICAN NATIONAL STA

44、NDARD ANSI Z245.30 2008 4 Figure 2 Typical refuse containers excluded from this standard AMERICAN NATIONAL STANDARD ANSI Z245.30 2008 52 Normative references The following standards contain provisions, which, through reference in this text, constitute provisions of this American National Standard. A

45、t the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this American National Standard shall apply the most recent editions of the standards indicated below. ANSI Z245.1-2008, Equipment Technology and Operations for Was

46、tes and Recyclable Materials Mobile Wastes and Recyclable Materials Collection, Transportation and Compaction Equipment Safety Requirements. ANSI Z245.21-2008, Equipment Technology and Operations for Wastes and Recyclable Materials Stationary Compactors Safety Requirements ANSI Z245.60-2008, Equipme

47、nt Technology and Operations for Wastes and Recyclable Materials Waste Containers Compatibility Dimensions ANSI Z535.1-2002, Safety Color Code ANSI Z535.2-2002, Environmental and Facility Safety Signs ANSI Z535.3-2002, Criteria for Safety Symbols ANSI Z535.4-2002, Product Safety Signs and Labels ANS

48、I/NFPA 82-2004, Fire Protection Standards for Incinerators, Linen Systems and Waste Compactors Society of Automotive Engineers (SAE) Standard J594, Reflex Reflectors, December 2003. U.S. Code of Federal Regulations, 49 CFR, Part 571.108, Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices and Associated Equipment 3 Definitions For the purposes of this American National Standard, the following definition