ANSI UL 61010-2-011-2017 UL Standard for Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-011 Particular Requirements for Refrigerat.pdf

《ANSI UL 61010-2-011-2017 UL Standard for Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-011 Particular Requirements for Refrigerat.pdf》由会员分享，可在线阅读，更多相关《ANSI UL 61010-2-011-2017 UL Standard for Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-011 Particular Requirements for Refrigerat.pdf（61页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 61010-2-011 (IEC 61010-2-011:2016) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-011: Particular Requirements for Refrigerating Equipment S

2、TANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety Requirements for Electrical Equipment for Meas

3、urement, Control, and Laboratory Use Part 2-011: Particular Requirements for Refrigerating Equipment, UL 61010-2-011 (IEC 61010-2-011:2016) First Edition, Dated January 31, 2017 Summary of Topics Adoption of IEC 61010-2-011, Safety Requirements for Electrical Equipment for Measurement, Control, and

4、Laboratory Use Part 2-011: Particular Requirements for Refrigerating Equipment (rst edition issued July 2016) as a new IEC-based UL standard, UL 61010-2-011 (IEC 61010-2- 011:2016), with no National Differences. The new requirements are substantially in accordance with Proposal(s) on this subject da

5、ted November 18, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warra

6、nty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data,

7、or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form

8、of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser

9、 is storing an electronic Standard on the purchasers computer system. JANUARY 31, 2017 UL 61010-2-011 (IEC 61010-2-011:2016) tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 31, 2017 UL 61010-2-011 (IEC 61010-2-011:2016) tr2 No Tex

10、t on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 31, 2017 1 UL 61010-2-011 (IEC 61010-2-011:2016) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-011: Particular Requireme

11、nts for Refrigerating Equipment First Edition January 31, 2017 This ANSI/UL Standard for Safety consists of the First Edition dated January 31, 2017. The most recent designation of ANSI/UL 61010-2-011 (IEC 61010-2-011:2016) as an American National Standard (ANSI) occurred on January 31, 2017. ANSI a

12、pproval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL

13、 at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and a

14、ll copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 61010-2-011-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY

15、 31, 2017 UL 61010-2-011 (IEC 61010-2-011:2016) 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 FOREWORD 7 INTRODUCTION . 10 1 Scope and object .13 1.2 Object .14 2 Normative references .14 3 Terms an

16、d denitions 14 4 Tests .15 4.3 Reference test conditions 15 5 Marking and documentation .18 5.2 Warning markings .20 5.4 Documentation 21 6 Protection against electric shock .22 7 Protection against mechanical HAZARDS 22 7.3 Moving parts 23 8 Resistance to mechanical stresses .23 9 Protection agains

17、t the spread of re 23 10 Equipment temperature limits and resistance to heat 23 10.1 Surface temperature limits for protection against burns .23 10.2 Temperature of windings 24 10.3 Other temperature measurements 24 10.4 Conduct of temperature tests 24 10.101 Protection against cold surfaces .25 11

18、Protection against HAZARDS from uids .25 11.7 Fluid pressure and leakage 25 12 Protection against radiation, including laser sources, and against sonic and ultrasonic pressure .36 13 Protection against liberated gases and substances, explosion and implosion .36 14 Components and subassemblies .36 14

19、.101 Components and subassemblies requirements for REFRIGERATING EQUIPMENT .36 15 Protection by safety interlocks 36 16 HAZARDS resulting from application .37 16.1 REASONABLY FORESEEABLE MISUSE .37 16.101 Slip HAZARD 37 17 RISK assessment 37 Annexes Annex G (informative) Leakage and rupture from uid

20、s under pressure Annex L (informative) Index of dened terms Annex AA (normative) Non-sparking “n” electrical apparatus JANUARY 31, 2017 UL 61010-2-011 (IEC 61010-2-011:2016) 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 11 Supplementary r

21、equirements for non-sparking luminaires 41 19 Supplementary requirements for sealed devices producing arcs, sparks or hot surfaces .41 19.1 Non-metallic materials 41 19.6 Type tests .41 20 Supplementary requirements for restricted-breathing enclosures protecting apparatus producing arcs, sparks or h

22、ot surfaces 41 Annex BB (informative) HAZARDS associated with REFRIGERATING SYSTEMS and refrigerants Annex CC (informative) Safety requirements for components and piping CC.1 Overview 45 CC.2 Components and subassemblies requirements for switches and controls used in REFRIGERATING EQUIPMENT for Nort

23、h America 48 Annex DD (informative) Equipment containing FLAMMABLE REFRIGERANTS Information and marking requirements DD.1 Marking, installation and operating instructions (SB6) .50 DD.1.1 General .50 DD.1.2 Marking .50 DD.1.3 OPERATOR markings .50 DD.1.4 Service markings 50 DD.1.5 Disposal 51 DD.1.6

24、 Exposed tubing 51 DD.1.7 Accessing the refrigerant circuit 51 DD.1.8 Symbol for warning of ammable materials 51 DD.1.9 Equipment containing a remote condensing unit .52 DD.1.10 REFRIGERATING EQUIPMENT intended for laboratory use 52 DD.2 Installation and operating instructions .52 DD.2.1 Handling an

25、d moving .52 DD.2.2 Packaging markings 52 DD.2.3 Replacement components and servicing 53 DD.2.4 Installation instructions for equipment containing a remote CONDENSING UNIT 53 Bibliography JANUARY 31, 2017 UL 61010-2-011 (IEC 61010-2-011:2016) 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRO

26、DUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 31, 2017 UL 61010-2-011 (IEC 61010-2-011:2016) 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This UL Standard is based on IEC Publication 61010-2-011:

27、 rst edition, Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-011: Particular Requirements for Refrigerating Equipment. IEC publication 61010-2-011 is copyrighted by the IEC. This UL Standard 61010-2-011 Standard for Safety Requirements for Electrical

28、 Equipment for Measurement, Control, and Laboratory Use Part 2-011: Particular Requirements for Refrigerating Equipment, is to be used in conjunction with the third edition of UL 61010-1. The requirements for control equipment are contained in this Part 2 Standard and UL 61010-1. Requirements of thi

29、s Part 2 Standard, where stated, amend the requirements of UL 61010-1. Where a particular subclause of UL 61010-1 is not mentioned in UL 61010-2-011, the UL 61010-1 subclause applies. The text, gures and tables of IEC Publication Safety Requirements for Electrical Equipment for Measurement, Control,

30、 and Laboratory Use Part 2-011: Particular Requirements for Refrigerating Equipment, IEC 61010-2-011, copyright July, 2016, are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission fro

31、m ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Publication 61010-2-011 may be purchased from ANSI, 11 W

32、est 42nd Street, New York, New York, 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. JANUARY 3

33、1, 2017 UL 61010-2-011 (IEC 61010-2-011:2016) 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE Part 2-011: Pa

34、rticular requirements for REFRIGERATING EQUIPMENT FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation

35、on all questions concerning standardization in the electrical and electronic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Public

36、ation(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC

37、collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opin

38、ion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to e

39、nsure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently

40、 to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certicati

41、on bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attac

42、h to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees)

43、 and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication

44、. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61010-2-011 has been prepared by IEC technical committee 66: S

45、afety of measuring, control and laboratory equipment. It has the status of a group safety publication in accordance with IEC Guide 104. JANUARY 31, 2017 UL 61010-2-011 (IEC 61010-2-011:2016) 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL T

46、he text of this standard is based on the following documents: FDIS Report on voting 66/589/FDIS 66/598/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/

47、IEC Directives, Part 2. A list of all parts of the IEC 61010 series, under the general title, Safety requirements for electrical equipment for measurement, control, and laboratory use, may be found on the IEC website. IEC 61010-2-011 is to be used in conjunction with the latest edition of IEC 61010-

48、1. It was established on the basis of the third edition (2010) of IEC 61010-1. This Part 2-011 supplements or modies the corresponding clauses in IEC 61010-1 so as to convert that publication into the IEC standard: Particular requirements for REFRIGERATING EQUIPMENT. Where a particular subclause of

49、Part 1 is not mentioned in this Part 2, that subclause applies as far as is reasonable. Where this part states “addition”, “modication”, “replacement”, or “deletion”, the relevant requirement, test specication, or note in Part 1 should be adapted accordingly. In this standard: 1) the following print types are used: requirements and denitions: in roman type; NOTES: in smaller roman type; conformity and tests: in italic type; terms used throughout this standard which have been dened in Clause 3: SMA