ANSI UL 248-16-2000 UL Standard for Safety Low-Voltage Fuses - Part 16 Test Limiters (Second Edition Reprint with Revisions Through and Including July 23 2013).pdf

《ANSI UL 248-16-2000 UL Standard for Safety Low-Voltage Fuses - Part 16 Test Limiters (Second Edition Reprint with Revisions Through and Including July 23 2013).pdf》由会员分享，可在线阅读，更多相关《ANSI UL 248-16-2000 UL Standard for Safety Low-Voltage Fuses - Part 16 Test Limiters (Second Edition Reprint with Revisions Through and Including July 23 2013).pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 248-16 Low-Voltage Fuses Part 16: Test LimitersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZE

2、D FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Low-Voltage Fuses Part 16: Test Limiters, UL 248-16 Second Edition, Dated August 1, 2000 Summary of Topics This revision of ANSI/UL 248-16 is being issued to reaffirm approval as an American National Sta

3、ndard. No changes in requirements are involved. As noted in the Commitment for Amendments statement located on the back side of the title page, UL, CSA, and ANCE are committed to updating this tri-national standard jointly. However, the revision pages dated July 23, 2013 will not be jointly issued b

4、y UL, CSA, and ANCE as these revision pages address only UL ANSI approval dates. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retr

5、ieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merch

6、antability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an auth

7、orized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and

8、hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are

9、 now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located aft

10、er the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. JULY 23, 2013 UL 248-16 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 23, 2013 UL 248-16 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURT

11、HER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Low-Voltage Fuses Part 16: Test Limiters August 1, 2000 (Title Page Reprinted: July 23, 2013) CSA International CSA C22.2 No. 248.16-00 Second Edition Underwriters Laboratories Inc. UL 248-16 Second Edition ANSI/UL 248-16-2004(R2013) Nation

12、al Association of Standardization and Certication of the Electrical Sector NMX-J-009/248/16-2000-ANCE First EditionUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This Standard is issued jointly by the National Asso

13、ciation of Standardization and Certication of the Electrical Sector (ANCE), CSA International, and Underwriters Laboratories Incorporated (UL). Amendments to this Standard will be made only after processing according to the Standards writing procedures by ANCE, CSA, and UL. Comments or proposals for

14、 revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Stand

15、ard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. Copyright 2000 ANCE Rights reserved in favor of ANCE ISBN 1-55324-256-4 Copyright 2000 CSA Group All rights reserved. No par

16、t of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. Copyright 2013 Underwriters Laboratories Inc.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .4 Foreword (ANCE) .6

17、 Foreword (CSA) .7 1 General 9 1.1 Scope .9 4 Classication .9 5 Characteristics 9 5.2 Voltage rating 9 5.3 Current rating 9 5.5 Interrupting rating .9 5.6 Peak let-through current and clearing I 2 t characteristics 10 5.7 Test current rating .10 6 Marking .10 6.1 Marking of fuses 10 7 Construction .

18、10 7.1 Dimensions .10 8 Tests .10 8.4 Verication of operation at rated voltage .10 8.5 Verication of peak let-through current and clearing I 2 t characteristics .11 NOVEMBER 3, 2008 NMX-J-009/248/16-2000-ANCE CSA C22.2 NO. 248.16-00 UL 248-16 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRO

19、DUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the common UL, CSA, and ANCE Standard for Low-Voltage Fuses Part 16: Test Limiters. This is the second edition of CSA C22.2 No. 248.16-00 (superseding the rst edition, published in 1996), the second edition of UL 248-16, and the rst

20、edition of NMX-J-009/248/16-2000-ANCE. This Standard was prepared by a Technical Harmonization Committee comprised of members from Underwriters Laboratories, CSA International, the National Association of Standardization and Certication of the Electrical Sector, the end product manufacturers, and ma

21、terial suppliers. The efforts and support of the members of the Technical Harmonization Committee are gratefully acknowledged. This Standard was reviewed by the CSA Subcommittee on Fuses and approved by the Technical Committee on Industrial Products under the jurisdiction of the CSA Strategic Resour

22、ce Group. This Standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Note: Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Stan

23、dard to judge its suitability for their particular purpose. Level of Harmonization This trinational standard is published as an Identical Standard. An identical standard is a standard that is the same in technical content except for conicts in Codes and Governmental Regulations. Presentation is word

24、 for word except for editorial changes. Interpretations The interpretation by the SDO (Standards Development Organization) of an identical standard shall be based on the literal text to determine compliance with the standard in accordance with the procedural rules of the SDO. If more than one interp

25、retation of the literal text has been identied, a revision shall be proposed as soon as possible to each of the SDOs to more accurately reect the intent. UL Effective Date This edition of the standard is now in effect. CSA Effective Date The effective date for CSA will be announced through CSA Infor

26、ms or CSA Certication Notice. ANCE Effective Date The effective date for ANCE will be announced through the Diario Ocial de la Federation (Official Gazette) and is indicated on the cover page. The most recent designation of ANSI/UL 248-16 as a Reaffirmed American National Standard (ANS) occurred on

27、July 23, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or effective date information. JULY 23, 2013 NMX-J-009/248/16-2000-ANCE CSA C22.2 NO. 248.16-00 UL 248-16 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHO

28、UT PERMISSION FROM UL This ANSI/UL Standard for Safety consists of the Second Edition including revisions through July 23, 2013. JULY 23, 2013 NMX-J-009/248/16-2000-ANCE CSA C22.2 NO. 248.16-00 UL 248-16 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISS

29、ION FROM UL Foreword (ANCE) The Present Mexican Standard was developed by the Low Voltage Fuses Subcommittee from the Comite de Normalizacion de la Asociacion Nacional de Normalizacion y Certicacion del Sector Electrico, A.C., CONANCE, with the collaboration of the fuse manufacturers and users. ANCE

30、 is an Organization for Standardization (ONN) registered by the DGN (Direccin General de Normas) in the electrical sector and household appliances. ANCE develops Mexican Standards (NMX) and collaborates in the development of the Mexican Official Standards (NOM); these are voluntary and normative sta

31、ndards, respectively. Conformity assessment in accordance with ANCE Mexican Standards is the responsibility of ANCEs Product Certication Division. ANCEs Product Certication Division is accredited by the EMA (Entidad Mexicana de Acreditacin) to certify a variety of products. Certication is carried ou

32、t following the relevant procedures established and developed by the Technical Committee on Certication in connection with the test reports produced in test labs accredited by the EMA. The conformity assessment activities developed by ANCE cover quality systems, test labs, and product verication. AP

33、RIL 14, 2004 NMX-J-009/248/16-2000-ANCE CSA C22.2 NO. 248.16-00 UL 248-16 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Foreword (CSA) The Canadian Standards Association (CSA) develops standards under the name Canadian Standards Associati

34、on, and provides certication and testing under the name CSA International. CSA International provides certication services for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on certain products of their manufacture to indicate conformity with CSA Standard

35、s. CSA Certication for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable, certication may form the basis for acceptance by inspection authorities responsible for enforcemen

36、t of regulations. Where feasible, programs will be developed for additional products for which certication is desired by producers, consumers, or other interests. In performing its functions in accordance with its objectives, CSA does not assume or undertake to discharge any responsibility of the ma

37、nufacturer or any other party. The opinions and ndings of the Association represent its professional judgement given with due consideration to the necessary limitations of practical operation and state of the art at the time the Standard is processed. Products in substantial accord with this Standar

38、d but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the feature or difference is found acceptable utilizing appropriate CSA International Operating Procedures. Products that comply with this Standard shall not be certied if they are found to have addi

39、tional features which are inconsistent with the intent of this Standard. Products shall not be certiable if they are discovered to contravene applicable laws or regulations. Testing techniques, test procedures, and instrumentation frequently must be prescribed by CSA International in addition to the

40、 technical requirements contained in Standards of CSA. In addition to markings specied in the Standard, CSA International may require special cautions, markings, and instructions that are not specied by the Standard. Some tests required by CSA Standards may be inherently hazardous. The Association n

41、either assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed, whether performed in whole or in part by the manufacturer or the Association, and whether or not any equipment, facility, or personnel for or in connection with

42、 the test is furnished by the manufacturer or the Association. Manufacturers should note that, in the event of the failure of CSA International to resolve an issue arising from the interpretation of requirements, there is an appeal procedure: the complainant should submit the matter, in writing, to

43、the Secretary of the Canadian Standards Association. If this Standard is to be used in obtaining CSA Certication please remember, when making application for certication, to request all current Amendments, Bulletins, Notices, and Technical Information Letters that may be applicable and for which the

44、re may be a nominal charge. For such information or for further information concerning CSA Certication, please address your inquiry to Applications and Customer Service, CSA International, 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3. APRIL 14, 2004 NMX-J-009/248/16-2000-ANCE CSA C22.2 NO

45、. 248.16-00 UL 248-16 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page intentionally left blank. NOVEMBER 3, 2008 NMX-J-009/248/16-2000-ANCE CSA C22.2 NO. 248.16-00 UL 248-16 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPR

46、ODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Low-Voltage Fuses Part 16: Test Limiters 1 General NOTE This Part is intended to be read together with the Standard for Low-Voltage Fuses Part 1: General Requirements, hereafter referred to as Part 1. The numbering of the Clauses in this Part corre

47、spond to like numbered Clauses in Part 1. The requirements of Part 1 apply unless modied by this Part. For Clauses not shown below, refer to the Standard for Low-Voltage Fuses Part 1: General Requirements, NMX-J-009/248/16-2000-ANCE CSA C22.2 No. 248.1 UL 248-1. 1.1 Scope This Part applies to test l

48、imiters calibrated to specic limits of peak let-through current and clearing I 2 ta t 250, 300, 480, or 600 V ac. 4 Classication Test limiters are non-renewable and current limiting, with test current ratings up to 200,000 A. They are calibrated to maximum peak let-through current and clearing I 2 t

49、 limits for the fuses specied in this Standard and are used for withstand testing of equipment designed to accept those fuses. Body sizes are not specied. 5 Characteristics 5.2 Voltage rating For AC, the rating shall be 250, 300, 480, or 600 V ac. 5.3 Current rating No current rating is assigned to a test limiter except in reference to (and marked as) the ampere rating for the fuse and classication it represents. 5.5 Interrupting rating No inter