ANSI TIA-637-C-1[E]-2007 Short Message Services (SMS) for Wideband Spread Spectrum Systems (Addendum to TIA-637-C)《宽带扩频系统用短信息服务(SMS).释放C 补充件1》.pdf

《ANSI TIA-637-C-1[E]-2007 Short Message Services (SMS) for Wideband Spread Spectrum Systems (Addendum to TIA-637-C)《宽带扩频系统用短信息服务(SMS).释放C 补充件1》.pdf》由会员分享，可在线阅读，更多相关《ANSI TIA-637-C-1[E]-2007 Short Message Services (SMS) for Wideband Spread Spectrum Systems (Addendum to TIA-637-C)《宽带扩频系统用短信息服务(SMS).释放C 补充件1》.pdf（148页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA STANDARD Short Message Services (SMS) for Wideband Spread Spectrum Systems Release C Addendum 1 TIA-637-C-1E (Addendum to TIA-637-C) February 2007 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance ANSI/TI

2、A-637-C-1E-2007 Approved: February 12 , 2007 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchase

3、r in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. N

4、either shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA

5、does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of

6、the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4391-RV3-AD1-A E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Docu

7、ment will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property ri

8、ghts (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requ

9、ested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the p

10、arties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If th

11、e Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of ma

12、ndatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encourageme

13、nt of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential

14、 Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES,

15、 EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESS

16、LY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUME

17、NT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDIN

18、G DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL EL

19、EMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-637-C-1 iii PREFACE These technical requirements form a standard for a Short Message Service (SMS), providing delivery of text and numeric information for paging, messaging, and vo

20、ice mail notification. This standard includes Service Option 6 and Service Option 14 (as defined in 15), which support delivery of short messages on Traffic Channels. Service Option 6 and Service Option 14 conform to the general requirements for service options specified in 10. A mobile station can

21、obtain Short Message Service operating in either the analog or the spread spectrum (CDMA) mode when it conforms to this standard. This standard does not address the quality or reliability of Short Message Service, nor does it cover equipment performance or measurement procedures. SECTION SUMMARY 1.

22、Introduction. This section defines the terms, references, protocols and network reference model used in this document. 2. SMS Relay Layer. This section defines the requirements for the lower layer of the SMS bearer service protocols. The SMS Relay Layer provides the interface between the Transport L

23、ayer and the Link Layer used for message transmission. 3. SMS Transport Layer. This section defines the requirements for the upper layer of the SMS bearer service protocols. The SMS Transport Layer manages the end-to-end delivery of messages. 4. SMS Teleservice Layer. This section defines the requir

24、ements for the SMS Teleservice Layer, which provides application-level data formats and procedures. TIA-637-C-1 iv NOTES 1. The following verbal forms are used: “Shall” and “shall not” identify requirements to be followed strictly to conform to the standard and from which no deviation is permitted.

25、“Should” and “should not” indicate that one of several possibilities is recommended as particularly suitable, without mentioning or excluding others; that a certain course of action is preferred but not necessarily required; or that (in the negative form) a certain possibility or course of action is

26、 discouraged but not prohibited. “May” and “need not” indicate a course of action permissible within the limits of the standard. “Can” and “cannot” are used for statements of possibility and capability, whether material, physical, or causal. 2. Footnotes appear at various points in this specificatio

27、n to elaborate and to further clarify items discussed in the body of the specification. 3. Unless indicated otherwise, this document presents numbers in decimal form. Binary numbers are distinguished in the text by the use of single quotation marks. In some tables, binary values may appear without s

28、ingle quotation marks if table notation clearly specifies that values are binary. The character x is used to represent a bit of unspecified value. For example xxx00010 represents any 8-bit binary value such that the least significant five bits equal 00010. Hexadecimal numbers (base 16) are distingui

29、shed in the text by use of the form 0xh h where h h represents a string of hexadecimal digits. For example, 0x2fa1 represents a number whose binary value is 0010111110100001 and whose decimal value is 12193. Note that the exact number of bits in the binary representation of a hexadecimal number stri

30、ctly depends upon the implementation requirements for the variable being represented. 4. “Base station” refers to the functions performed on the fixed network, which are typically distributed among a cell, a sector of a cell, and a mobile communications switching center. TIA-637-C-1 v TABLE OF CONTE

31、NTS SECTION SUMMARY. iii NOTES .iv 1 Introduction . 1-1 1.1 General Description 1-1 1.2 Terms . 1-3 1.3 References 1-5 1.4 Network Reference Model 1-7 1.5 SMS Protocols. 1-8 2 SMS Relay Layer. 2-1 2.1 Introduction 2-1 2.2 Overview . 2-1 2.2.1 Model of Operation. 2-1 2.2.1.1 UmInterface 2-1 2.2.1.2 N

32、 (Intersystem) Interface 2-2 2.2.2 Relay Layer Functions 2-2 2.2.3 Service Description 2-3 2.2.3.1 Service Primitives. 2-3 2.2.3.1.1 UmInterface Primitives 2-5 2.2.3.1.2 N Interface Primitives . 2-6 2.2.3.2 Services Provided by the Relay Layer 2-7 2.2.3.2.1 Point-to-Point . 2-7 2.2.3.2.2 Broadcast.

33、2-7 2.2.3.3 Services Required from Protocol Layers 2-7 2.2.3.4 Services Required from Intersystem Links 2-8 2.3 Elements of Procedures. 2-8 2.3.1 Formats of Fields . 2-8 2.3.2 Error Codes . 2-8 2.4 Definition of Procedures 2-9 2.4.1 Mobile Station Procedures . 2-9 2.4.1.1 Point-to-Point Procedures.

34、2-9 2.4.1.1.1 Common Channel Procedures 2-9 TIA-637-C-1 vi 2.4.1.1.1.1 Mobile SMS Message Termination 2-9 2.4.1.1.1.2 Mobile SMS Message Origination 2-9 2.4.1.1.2 Mobile Station Traffic Channel Procedures2-11 2.4.1.1.2.1 Negotiation for the SMS Service Option .2-11 2.4.1.1.2.1.1 Procedures Using Ser

35、vice Option Negotiation.2-11 2.4.1.1.2.1.2 Procedures Using Service Negotiation 2-12 2.4.1.1.2.2 Mobile SMS Message Termination .2-13 2.4.1.1.2.3 Traffic Channel Setup2-14 2.4.1.1.2.4 Mobile Station Message Origination in the Conversation Substate2-14 2.4.1.2 Broadcast Procedures .2-15 2.4.1.2.1 Com

36、mon Channel Procedures for Broadcast SMS .2-15 2.4.1.2.2 Traffic Channel Procedures .2-16 2.4.2 Base Station Procedures, UmInterface.2-16 2.4.2.1 Point-to-Point Procedures .2-16 2.4.2.1.1 Common Channel Procedures.2-16 2.4.2.1.1.1 Mobile SMS Message Origination.2-16 2.4.2.1.1.2 Mobile SMS Message Te

37、rmination .2-17 2.4.2.1.2 Base Station Traffic Channel Procedures.2-18 2.4.2.1.2.1 Negotiation for the SMS Service Option .2-18 2.4.2.1.2.1.1 Procedures Using Service Option Negotiation.2-18 2.4.2.1.2.1.2 Procedures Using Service Negotiation 2-19 2.4.2.1.2.2 Mobile SMS Message Origination.2-19 2.4.2

38、.1.2.3 Traffic Channel Setup2-20 2.4.2.1.2.4 Mobile Station Message Termination in the Conversation Substate2-20 2.4.2.2 Broadcast Procedures .2-21 2.4.3 Base Station Procedures, N Interface 2-22 3 SMS Transport Layer 3-1 3.1 Introduction . 3-1 3.2 Overview. 3-1 3.2.1 Model of Operation 3-1 3.2.2 Tr

39、ansport Layer Functions. 3-1 3.2.2.1 Bearer Service End Points 3-1 TIA-637-C-1 vii 3.2.2.2 Bearer Service Relay Points 3-1 3.2.3 Service Description 3-2 3.2.3.1 Teleservice Interface. 3-2 3.2.3.2 Services Required from the Relay Layer 3-2 3.3 Definition of Procedures 3-2 3.3.1 Relay Point Procedures

40、, Base Station. 3-2 3.3.2 End Point Procedures, Mobile Station 3-5 3.3.3 Authentication Procedures. 3-6 3.3.3.1 Mobile Station Procedures 3-6 3.3.3.2 Base Station Procedures 3-6 3.4 Transport Layer Messages. 3-7 3.4.1 Message Format. 3-7 3.4.2 Message Definitions . 3-8 3.4.2.1 SMS Point-to-Point Mes

41、sage. 3-8 3.4.2.2 SMS Broadcast Message. 3-8 3.4.2.3 SMS Acknowledge Message 3-9 3.4.3 Parameter Definitions 3-9 3.4.3.1 Teleservice Identifier. 3-10 3.4.3.2 Service Category. 3-11 3.4.3.3 Address Parameters . 3-12 3.4.3.4 Subaddress 3-15 3.4.3.5 Bearer Reply Option. 3-17 3.4.3.6 Cause Codes 3-18 3.

42、4.3.7 Bearer Data 3-19 4 SMS Teleservice Layer 4-1 4.1 Introduction 4-1 4.2 Overview . 4-1 4.3 Teleservice Procedures 4-1 4.3.1 General 4-1 4.3.1.1 Mobile Station Message Termination 4-1 4.3.1.2 Mobile Station Message Origination 4-2 4.3.1.3 Broadcast Messaging Service 4-2 TIA-637-C-1 viii 4.3.1.4 A

43、nalog Mode SMS Services 4-2 4.3.1.4.1 Extended Protocol SMS Services 4-3 4.3.1.4.2 Alert With Info SMS Services 4-4 4.3.1.5 Setting of Message Identifier Field 4-5 4.3.1.6 Unique Message Identification . 4-5 4.3.2 IS-91 Extended Protocol Enhanced Services 4-6 4.3.3 Wireless Paging Teleservice (WPT)

44、4-6 4.3.4 Wireless Messaging Teleservice (WMT) . 4-8 4.3.5 Voice Mail Notification (VMN)4-11 4.3.5.1 Enhanced Voice Mail Notification4-11 4.3.6 Wireless Application Protocol (WAP)4-13 4.3.7 Wireless Enhanced Messaging Teleservice (WEMT) .4-13 4.3.8 Service Category Programming Teleservice (SCPT) 4-1

45、6 4.3.9 Card Application Toolkit Protocol Teleservice (CATPT).4-17 4.4 Teleservice Message Contents4-18 4.4.1 SMS Deliver Message4-18 4.4.2 SMS Submit Message .4-19 4.4.3 SMS Cancellation Message .4-20 4.4.4 SMS User Acknowledgment Message 4-20 4.4.5 SMS Delivery Acknowledgment Message.4-21 4.4.6 SM

46、S Read Acknowledgment Message4-21 4.4.7 SMS Deliver Report Message.4-21 4.4.8 SMS Submit Report Message 4-22 4.5 Bearer Data Subparameters 4-23 4.5.1 Message Identifier.4-24 4.5.2 User Data .4-26 4.5.3 User Response Code .4-28 4.5.4 Message Center Time Stamp.4-29 4.5.5 Validity Period - Absolute .4-

47、31 4.5.6 Validity Period - Relative.4-33 4.5.7 Deferred Delivery Time - Absolute.4-35 4.5.8 Deferred Delivery Time - Relative 4-37 TIA-637-C-1 ix 4.5.9 Priority Indicator 4-38 4.5.10 Privacy Indicator 4-39 4.5.11 Reply Option 4-40 4.5.12 Number of Messages 4-42 4.5.13 Alert on Message Delivery 4-43

48、4.5.14 Language Indicator 4-44 4.5.15 Call-Back Number . 4-45 4.5.16 Message Display Mode . 4-47 4.5.17 Multiple Encoding User Data . 4-48 4.5.18 Message Deposit Index. 4-50 4.5.19 Service Category Program Data 4-51 4.5.20 Service Category Program Results 4-55 4.5.21 Message Status 4-57 4.5.22 TP-Fa

49、ilure Cause . 4-59 4.5.23 Enhanced VMN 4-60 4.5.24 Enhanced VMN Delete Ack 4-66 SECTION SUMMARYError! Bookmark not defined. NOTES .Error! Bookmark not defined. 1 Introduction Error! Bookmark not defined. 1.1 General Description .Error! Bookmark not defined. 1.2 Terms Error! Bookmark not defined. 1.3 References .Error! Bookmark not defined. 1.4 Network Reference Model .Error! Bookmark not defined. 1.5 SMS ProtocolsError! Bookmark not defined. 2 SMS Relay LayerError! Bookmark not defined. 2.1 Introduction.Error! Bookmark not defined. 2.2 Overview Error! Bookmark not