ANSI TIA-440-C-2017 Fiber Optic Terminology.pdf

《ANSI TIA-440-C-2017 Fiber Optic Terminology.pdf》由会员分享，可在线阅读，更多相关《ANSI TIA-440-C-2017 Fiber Optic Terminology.pdf（114页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-440-C (Revision of TIA-440-B) July 2017Fiber Optic Terminology ANSI/TIA-440-C-2017 APPROVED: JULY 12, 2017 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interch

2、angeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or se

3、lling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American Nati

4、onal Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or a

5、ll applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do no

6、t constitute an endorsement by TIA or this committee of the products or services of the company. (From Standards Proposal No. ANSI/TIA-PN-440-C-D1, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems, TR-42.5 Subcommittee on Telecommunications Infrastructure Terms and

7、 Symbols). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS,

8、USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including p

9、osting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonli

10、ne.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the stand

11、ards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting o

12、f patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validi

13、ty of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent

14、 that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publi

15、cation of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search

16、or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent appli

17、cations shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Do

18、cument. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CO

19、NTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGAR

20、DING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT

21、, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF

22、 WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. June 20

23、17 ANSI/TIA-PN-440-C - i - 1 FIBER OPTIC TERMINOLOGY 2 3 4 5 FOREWORD ii 6 1 SCOPE . 1 7 2 TERMS Optical Cavity. 132 133 134 June 2017 ANSI/TIA-PN-440-C - 3 - Active Star Coupler 135 Device in which power from one or several input fibers is distributed amongst a larger number 136 of output optical f

24、ibers with gain or regeneration. 137 See also: Optical Combiner; Star Coupler. 138 139 Adapter 140 The double female portion of a fiber optic connector assembly that joins two male connector 141 plugs. 142 143 Adapter Sleeve 144 The element within an optical adapter that aligns the plugs or ferrules

25、 of two mating connector 145 plugs. 146 147 Adaptive Optics 148 The development and use of optical components whose characteristics are controlled during 149 their operational use in order to modify the characteristics of lightwaves propagating within 150 them. Controlled lightwave characteristics i

26、nclude wavefront direction, polarization, modal 151 power distribution, electromagnetic field strength, or the path they take. 152 153 Adjustable Attenuator 154 An optical attenuator in which the level of attenuation is varied with an internal adjustment 155 through external control. 156 Synonym: Va

27、riable Attenuator. 157 158 Alien Far-end Crosstalk Loss 159 The unwanted signal coupling from a disturbing pair of a 4-pair channel, permanent link, or 160 component to a disturbed pair of another 4-pair channel, permanent link, or component, 161 measured at the far-end. 162 163 Alien Limited Signal

28、-to-Noise Ratio 164 Ratio derived from measurements of the cable insertion loss and alien crosstalk. 165 166 Alien Near-end Crosstalk Loss 167 Unwanted signal coupling from a disturbing pair of a 4-pair channel, permanent link, or 168 component to a disturbed pair of another 4-pair channel, permanen

29、t link, or component, 169 measured at the near-end. 170 171 Alien Near-end Crosstalk Loss, Power Sum 172 The power sum of the unwanted signal coupling from multiple disturbing pairs of one or more 4-173 pair channels, permanent links, or components to a disturbed pair of another 4-pair channel, 174

30、permanent link, or component, measured at the near-end. 175 176 Aligned Bundle 177 A bundle of optical fibers in which the relative spatial coordinates of each fiber are the same at 178 the two ends of the bundle. 179 NOTE: The term “Coherent Bundle“ is often employed as a synonym, and should not be

31、 180 confused with phase coherence or spatial coherence. An aligned bundle is often used 181 to conduct images. 182 Synonym: Coherent Bundle. 183 See also: Fiber Bundle. 184 ANSI/TIA-PN-440-C - 4 - 185 Alpha Profile 186 See also: Power-Law Index Profile. 187 188 Alternative Test Method (ATM) 189 A t

32、est method in which a given characteristic of a specified component or device is measured in 190 a manner that is consistent with the definition of the characteristic, gives reproducible results 191 that are relatable to the reference test method, and is relatable to practical use. 192 193 Ambient L

33、ight Susceptibility 194 The optical power that enters a device from ambient illumination incident upon the device. 195 196 Angle of Deviation 197 In optics, the net angular deflection experienced by a light ray after one or more refractions or 198 reflections. 199 NOTE: The term is generally used in

34、 reference to prisms, assuming air interfaces. The angle 200 of deviation is then the angle between the incident ray and the emergent ray. 201 See also: Reflection; Refraction. 202 203 Angle of Incidence 204 The angle between an incident ray and the normal to a reflecting or refracting surface. 205

35、See also: Critical Angle; Total Internal Reflection; Angle of Reflection 206 The angle formed between the normal to a surface and the reflected ray. The angle lies in a 207 common plane with the angle of incidence and is equal to it. 208 209 Angle of Refraction 210 The angle formed between a refract

36、ed ray and the normal to the surface. 211 212 Angstrom 213 A unit of length in optical measurement. 214 215 1 = 10-10 meter. = 10-4 micrometer. = 10-1 nanometer. NOTE: The angstrom has been used historically in the field of optics, but it is not an SI 216 (International System) unit. 217 218 Angular

37、 Misalignment Loss 219 The optical power loss caused by angular deviation from the optimum alignment of source to 220 optical fiber, fiber to fiber, or fiber to detector. 221 See also: Extrinsic Joint Loss; Gap Loss; Intrinsic Joint Loss; Lateral Offset Loss. 222 223 Angular Offset Loss 224 See also

38、: Angular Misalignment Loss 225 226 Anisotropic 227 Pertaining to a material whose electrical or optical properties are different for different directions 228 of propagation or different polarizations of a traveling wave. 229 See also: Isotropic. 230 June 2017 ANSI/TIA-PN-440-C - 5 - 231 Antireflect

39、ion Coating 232 A thin, dielectric or metallic film (or several such films) applied to an optical surface to reduce 233 the reflectance and thereby increase the transmittance. 234 NOTE: The ideal value of the refractive index of a single layered film is the square root of the 235 product of the refr

40、active indices on either side of the film, the ideal optical thickness 236 being one quarter of a wave-length. 237 See also: Dichroic Filter; Fresnel Reflection; Reflectance; Transmittance. 238 239 Array Cable 240 See also: Array Connector Cable. 241 242 Array Connector (multi-fiber connector) 243 A

41、 single ferrule connector that contains multiple optical fibers arranged in a row or in rows and 244 columns. 245 246 Array Connector Cable 247 A length of optical fiber cable with array connector(s) on each end. 248 249 Array Patch Cord 250 A patch cord with array connector(s) on each end. 251 252

42、Attenuation 253 Reduction in strength of a signal 254 255 NOTE: In an optical fiber, attenuation results from absorption, scattering, and other radiation. 256 Attenuation is generally expressed in dB. However, attenuation is often used as a synonym for 257 attenuation coefficient, expressed in dB/km

43、. See also: Attenuation Coefficient; Coupling 258 Loss; Differential Mode Attenuation; Equilibrium Mode Distribution; Extrinsic Joint Loss; 259 Insertion Loss; Intrinsic Joint Loss; Leaky Mode; Macrobend Loss; Material Scattering; 260 Microbend Loss. 261 262 Attenuation Coefficient 263 The rate of d

44、iminution of average optical power with respect to distance along the fiber. 264 1010)0()( zPzP 265 266 Where P(z) is the power at distance z along the guide and P(0) is the power at z = 0; is the 267 attenuation coefficient in dB/km if z is in km. From this equation, 268 269 )0( )(log10 10 P zPz 27

45、0 271 272 273 274 275 ANSI/TIA-PN-440-C - 6 - This assumes that is independent of z; if otherwise, the definition is given in terms of 276 incremental attenuation as: 277 278 z dzzPzP 0 10)(10)0()( 279 280 or, equivalently, 281 282 )0( )(log10)( 10 P zPdzdz 283 284 See also: Attenuation; Attenuation

46、 Constant; Axial Propagation Constant 285 286 Attenuation Constant. 287 For a particular mode, the real part of the axial propagation constant. The attenuation 288 coefficient for the mode power is twice the attenuation constant. 289 See also: Attenuation Coefficient; Axial Propagation Constant; Pro

47、pagation Constant. 290 291 Attenuation-Limited Operation 292 The condition prevailing when the received signal amplitude (rather than distortion) limits 293 performance. 294 See also: Bandwidth-Limited Operation; Distortion-Limited Operation. 295 296 Attenuation to Alien Crosstalk Ratio Far-end 297

48、The difference, in dB, between the alien far-end crosstalk from a disturbing pair of a 4-pair 298 channel, permanent link, or component, and the insertion loss of the disturbed pair in another 4-299 pair channel, permanent link, or component. 300 301 Avalanche Photodiode (APD) 302 A photodiode desig

49、ned to take advantage of avalanche multiplication of photocurrent. 303 NOTE: As the reverse-bias voltage approaches the breakdown voltage, hole-electron pairs 304 created by absorbed photons acquire sufficient energy to create additional hole-305 electron pairs when they collide with ions; thus a multiplication (signal gain) is achieved. 306 See also: APD; Photodiode; PIN Photodiode, Average Wavelength, Mode (a) 307