ANSI P1802.16.1 D2-2002 Draft Standard for Conformance to IEEE Standard 802.16 – Part 1 Protocol Implementation Conformance Statement (PICS) Proforma for 10-66 GHz WirelessMAN-SC A.pdf

《ANSI P1802.16.1 D2-2002 Draft Standard for Conformance to IEEE Standard 802.16 – Part 1 Protocol Implementation Conformance Statement (PICS) Proforma for 10-66 GHz WirelessMAN-SC A.pdf》由会员分享，可在线阅读，更多相关《ANSI P1802.16.1 D2-2002 Draft Standard for Conformance to IEEE Standard 802.16 – Part 1 Protocol Implementation Conformance Statement (PICS) Proforma for 10-66 GHz WirelessMAN-SC A.pdf（166页珍藏版）》请在麦多课文档分享上搜索。

1、 P1802.16.1/D2, December 2002 DS5910 Draft Standard for Conformance to IEEE Standard 802.16 Part 1: Protocol Implementation Conformance Statement (PICS) Proforma for 10-66 GHz WirelessMAN-SC Air Interface Prepared by the LAN MAN Standards Committee of the IEEE Computer Society and the IEEE Microwave

2、 Theory and Techniques Society Copyright 2003 by the Institute of Electrical and Electronics Engineers, Inc. Three Park Avenue New York, New York 10016-5997, USA All rights reserved This document is an unapproved draft of a proposed IEEE-SA StandardUSE AT YOUR OWN RISK. As such, this document is sub

3、ject to change. Permission is hereby granted for IEEE Standards Committee participants to reproduce this document for purposes of IEEE standardization activities only. Prior to submitting this document to another standard development organization for standardization activities, permission must first

4、 be obtained from the Manager, Standards Licensing and Contracts, IEEE Standards Activities Department. Other entities seeking permission to reproduce portions of this document must obtain the appropriate license from the Manager, Standards Licensing and Contracts, IEEE Standards Activities Departme

5、nt. The IEEE is the sole entity that may authorize the use of IEEE owned trademarks, certification marks, or other designations that may indicate compliance with the materials contained herein. IEEE Standards Activities Department Standards Licensing and Contracts 445 Hoes Lane, P.O. Box 1331 Piscat

6、away, NJ 08855-1331, USA Copyright 2003 IEEE. All rights reserved. This is an unapproved IEEE Standards Draft, subject to change. Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without

7、 license from IHS-,-,-Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright 2002 by the Institute of Electrical and Electronics Engineers, Inc.3 Park Av

8、enue, New York, NY 10016-5997, USAAll rights reserved.Contains material WiMAX Forum 2002This is an unapproved draft of a proposed IEEE Standard, subject to change. Permission is hereby granted for IEEE Stan-dards Committee participants to reproduce this document for purposes of IEEE standardization

9、activities. If this docu-ment is to be submitted to ISO or IEC, notification shall be given to the IEEE Copyright Administrator. Permission isalso granted for member bodies and technical committees of ISO and IEC to reproduce this document for purposes ofdeveloping a national position. Other entitie

10、s seeking permission to reproduce portions of this document for these orother uses must contact the IEEE Standards Department for the appropriate license. Use of information contained in theunapproved draft is at your own risk.IEEE Standards DepartmentCopyright and Permissions445 Hoes Lane, P.O. Box

11、 1331Piscataway, NJ 08855-1331, USA12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364652002-12-31 IEEE P1802.16.1/D2Draft Standard for Conformance to IEEE Standard802.16 Part 1:Protocol ImplementationConformance Statement (PICS) Pr

12、oforma for10-66 GHz WirelessMAN-SC Air InterfaceSponsorsLAN MAN Standards Committeeof the IEEE Computer Societyand theIEEE Microwave Theory and Techniques SocietyAbstract: This standard represents the Protocol Implementation Conformance Statement Profor-ma, per ISO/IEC 9646-7 (1995) and ITU-T X.296,

13、 for conformance specification of base stationsand subscriber stations based upon the WirelessMAN-SC air interface specified in IEEE Std 802.16.Keywords: WirelessMAN standards, metropolitan area network, fixed broadband wireless ac-cess networks, millimeter waves, microwavesCopyright The Institute o

14、f Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2002-12-31 IEEE P1802.16.1/D2ii Copyright 2002 IEEE. All rights reserved.This is an unapproved IEEE Standards draft, subject to chang

15、e.1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465Grateful acknowledgment is made to the Worldwide Interoperability for Microwave Access (WiMAX)forum for the permission to use the following source material:Protocol Implementati

16、on Conformance Statement for IEEE Standard 802.16-2001, Copyright 2002,WiMAX Forum.Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2002-12-31 IEEE P1802.16.

17、1/D2Copyright 2002 IEEE. All rights reserved. iiiThis is an unapproved IEEE Standards draft, subject to change.1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465IEEE Standards documents are developed within the IEEE Societies and

18、 the Standards Coordinating Committees of theIEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus develop-ment process, approved by the American National Standards Institute, which brings together volunteers representing variedviewpoints and inter

19、ests to achieve the final product. Volunteers are not necessarily members of the Institute and serve with-out compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus devel-opment process, the IEEE does not independently evaluate, test, or verif

20、y the accuracy of any of the information containedin its standards.Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other dam-age, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly

21、 resultingfrom the publication, use of, or reliance upon this, or any other IEEE Standard document.The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaimsany express or implied warranty, including any implied warranty of merchantabilit

22、y or fitness for a specific purpose, or thatthe use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.”The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market,or provide ot

23、her goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at thetime a standard is approved and issued is subject to change brought about through developments in the state of the art andcomments received from users of the standard. Every IEEE Standard is

24、subjected to review at least every five years for revi-sion or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to concludethat its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned

25、to checkto determine that they have the latest edition of any IEEE Standard.In publishing and making this document available, the IEEE is not suggesting or rendering professional or other servicesfor, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any

26、other person orentity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of a com-petent professional in determining the exercise of reasonable care in any given circumstances.Interpretations: Occasionally questions may arise regarding the meani

27、ng of portions of standards as they relate to specificapplications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepareappropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure

28、that anyinterpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its soci-eties and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except inthose cases where the matter has previousl

29、y received formal consideration. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation withIEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriatesupporting comments. Commen

30、ts on standards and requests for interpretations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LaneP.O. Box 1331Piscataway, NJ 08855-1331USAThe IEEE and its designees are the sole entities that may authorize the use of the IEEE-owned certification marks and/ortrademarks to indica

31、te compliance with the materials set forth herein. IEEE grants permission to print hard copies of theforms in this document for purposes of documentation.Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute ofElectrical and Electroni

32、cs Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. Toarrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive,Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individ

33、ual standard for educationalclassroom use can also be obtained through the Copyright Clearance Center.Note: Attention is called to the possibility that implementation of this standard may require use of subject mat-ter covered by patent rights. By publication of this standard, no position is taken w

34、ith respect to the existence orvalidity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patentsfor which a license may be required by an IEEE standard or for conducting inquiries into the legal validity orscope of those patents that are brought to its

35、attention.Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2002-12-31 IEEE P1802.16.1/D2Copyright 2002 IEEE. All rights reserved. ivThis is an unapproved IEE

36、E Standards draft, subject to change.1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465Trademark StatementThe mark IEEEis the registered trademark of the Institute of Electrical and Electronics Engineers, Inc.Copyright The Instit

37、ute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2002-12-31 IEEE P1802.16.1/D2Copyright 2002 IEEE. All rights reserved. vThis is an unapproved IEEE Standards draft, subject to c

38、hange.1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465ParticipantsThis document was developed by the IEEE 802.16 Working Group on Broadband Wireless Access, whichis responsible for Wireless Metropolitan Area Network (WirelessMA

39、N) Standards:IEEE 802.16 Working Group OfficersRoger B. Marks, ChairDean Chang, SecretaryPrimary development was carried out by the Working Groups Task Group C:TGc OfficersKenneth Stanwood, ChairCarl Eklund, Technical EditorCopyright The Institute of Electrical and Electronics Engineers, Inc. Provid

40、ed by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2002-12-31 IEEE P1802.16.1/D2Copyright 2002 IEEE. All rights reserved. viThis is an unapproved IEEE Standards draft, subject to change.1234567891011121314151617181920212223242526272829

41、303132333435363738394041424344454647484950515253545556575859606162636465The following members of the IEEE 802.16 Working Group on Broadband Wireless Access participated in the Working Group Letter Ballot in which the draft of this standard was approved:The following members of the IEEE Balloting Com

42、mittee voted on this standard, whether voting forapproval or disapproval, or abstaining.Aditya AgrawalGordon AntonelloReza ArefiJori ArrakoskiMalik AudehEli AviviBrian BanisterAnader Benyamin-SeeyarBaruch BuskilaDean ChangRmi ChayerBrian EdmonstonBrian EidsonCarl EklundAvraham FreedmanG. Jack Garris

43、onGrant HulseOfer KelmanBrian KiernanItzik KitroserMark KlererThomas KolzeJerome KrinockJonathan LabsYigal LeibaLars LindhHui-Ling LouRoger MarksRussell McKownAndrew MiddletonApurva ModyJames MollenauerRobert NelsonSubbu PonnuswamyGene RobinsonShane RogersVincentzio RomanRandall SchwartzYossi SegalJ

44、ames SimkinsSean SonanderKenneth StanwoodBill ThomsonRainer UllmannNico van WaesLei WangCopyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2002-12-31 IEEE P180

45、2.16.1/D21234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465ContentsForeword 7Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking

46、 permitted without license from IHSCopyright 2002 IEEE viiThis is an unapproved standards draft, subject to change.Introduction 71. Scope72. Purpose.73. References74. Definitions and Abbreviations.84.1 Definitions.84.2 Abbreviations.85. Conformance to this PICS Proforma Specification.9Annex A (Norma

47、tive) :10A.1 Guidance for completing PICS Proforma10A.1.1 Purposes and Structure10A.1.2 Abbreviations and Conventions10A.1.3 Instructions for completing the PICS Proforma12A.2 Identification of the Implementation.13A.2.1 Date of Statement13A.2.2 Implementation Under Test (IUT) Identification.13A.2.3

48、 System Under Test (SUT) Identification14A.2.4 Product Supplier14A.2.5 Client (if different from product supplier)15A.2.6 PICS Contact Person.15A.3 Identification of the Standard16A.3.1 Profiles16A.4 Global Statement of Conformance16A.5 Roles17A.6 Subscriber Station17A.6.1 Major SS Capabilities and

49、Functionalities of the MAC.17A.6.1.1 Convergence Sublayers.17A.6.1.1.1ATM Convergence Sublayer17A.6.1.1.2Packet Convergence Sublayer 18A.6.1.2 Addressing and Connections.20A.6.1.3 Construction and Transmission of MAC PDUs21A.6.1.3.1Conventions21A.6.1.3.2PDU Concatenation.21A.6.1.3.3SDU Fragmentation22A.6.1.3.4Packing22A.6.1.3.5CRC.23A.6.1.4 Uplink Scheduling Service23A.6.1.5 Bandwidth Allocation and Request Mechani