ANSI NEMA C80.5-2015 Electrical Rigid Metal Conduit Aluminum (ERMC-A).pdf

《ANSI NEMA C80.5-2015 Electrical Rigid Metal Conduit Aluminum (ERMC-A).pdf》由会员分享，可在线阅读，更多相关《ANSI NEMA C80.5-2015 Electrical Rigid Metal Conduit Aluminum (ERMC-A).pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C80.5-2015Electrical Rigid Metal Conduit Aluminum (ERMC-A) ANSI C80.5-2015 American National Standard for Electrical Rigid Metal ConduitAluminum (ERMC-A) Secretariat: National Electrical Manufacturers Association Approved: D

2、ecember 14, 2015 American National Standards Institute, Inc. ANSI C80.5-2015 NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not

3、 necessarily mean that there is unanimous agreement among every person participating in the development of this document. American National Standards Institute, Inc., (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consens

4、us standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process to promote fairness in the development of consensus, it does not write the document and it

5、 does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether sp

6、ecial, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and

7、 disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and mak

8、ing this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgm

9、ent or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for addition

10、al views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other

11、statement of compliance with any health- or safetyrelated information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. 2015 National Electrical Manufacturers Association ANSI C80.5-2015 Page i 2015 National Electrical Man

12、ufacturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by The American National Standards Institute, Inc. (ANSI) that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An A

13、merican National Standard implies a consensus of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly, and materially affected interests. Substantial agree

14、ment means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone, whether s/h

15、e has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The American National Standards Institute, Inc., does n

16、ot develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute, Inc. Requests for in

17、terpretations should be addressed to the secretariat or sponsor whose name appears on this title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute, Inc., require that action be taken periodically

18、 to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute, Inc. Published by National Electrical Manufacturers Association 1300 North 17thStreet, Suite 90

19、0 Rosslyn, Virginia 22209 2015 National Electrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan Americ

20、an Copyright Conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America ANSI C80.5-2015 Page ii 2015 National Electrical Manufacturers Associati

21、on Foreword (This foreword is not part of American National Standard C80.5-2015.) This standard was developed by the Accredited Standards Committee on Raceways for Electrical Wiring Systems, C80. The objective of the committee is to produce a comprehensive specification that would establish uniform

22、dimensions and standard construction requirements for electrical rigid steel conduit, steel electrical metallic tubing, electrical intermediate metal conduit, and electrical aluminum rigid conduit raceway products and their associated components. The standard was originally approved in 1950 and revi

23、sed in 1953, 1959, 1963, 1966, 1977, 1983, 1990, 1994, 2005, and 2015. Suggestions for improvement of this standard will be welcome. They should be sent to the National Electrical Manufacturers Association, 1300 North 17th Street, Suite 900, Rosslyn, Virginia 22209. This standard was processed and a

24、pproved for submittal to ANSI by the Accredited Standards Committee on Raceways for Electrical Wiring Systems, C80. Committee approval of the standard does not necessarily imply that all committee members voted for its approval. At the time it approved this standard, the C80 Committee comprised the

25、following members: M. J. Brett, Jr., Chair J. G. Solis, Secretary Organization Represented: Name of Representative: Western Tube 0.015 in. (0.38 mm) for trade sizes 1 (27) and smaller ANSI C80.5-2015 Page 7 2015 National Electrical Manufacturers Association Table 4 Dimensions of 90-degree elbows and

26、 weights of nipples per hundred English Units SI (Metric) Units Trade size Elbows Nipples Metric designator Elbows Nipples Minimum radius to center of conduit (in.) Minimum straight length lsat each end (in.) A lb per in. B lb per 100 Minimum radius to center of conduit (mm) Minimum straight length

27、lsat each end (mm) A kg per 100mm B kg per 100 1/2 4 1-1/2 0.023 1.04 16 102 38 0.0401 0.47 3/4 4-1/2 1-1/2 0.030 1.39 21 114 38 0.0531 0.63 1 5-3/4 1-7/8 0.043 3.12 27 146 48 0.0772 1.41 1-1/4 7-1/4 2 0.057 3.46 35 184 51 0.1013 1.57 1-1/2 8-1/4 2 0.070 3.81 41 210 51 0.1248 1.72 2 9-1/2 2 0.093 4.

28、85 53 241 51 0.1662 2.20 2-1/2 10-1/2 3 0.149 20.78 63 267 76 0.2657 9.42 3 13 3-1/8 0.194 24.24 78 330 79 0.3466 10.98 3-1/2 15 3-1/4 0.230 31.17 91 381 83 0.4096 14.12 4 16 3-3/8 0.272 39.82 103 406 86 0.4856 18.05 5 24 3-5/8 0.367 58.87 129 610 92 0.6430 26.68 6 30 3-3/4 0.488 69.26 155 762 95 0.

29、8712 31.39 NOTEEach lot of 100 nipples shall weigh not less than the number of pounds (kilograms) determined by the formula W = 100 * (LA) B, where W is the weight of 100 nipples in pounds (kilograms), L is the length of one nipple in inches (millimeters), A is the weight of nipple per inch (25.4 mm

30、) in pounds (kilograms), and B is the weight in pounds (kilograms) lost in threading 100 nipples. NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB