ANSI ISO 19101-2002 Geographic information Reference model Adopted by INCITS《地理信息.被INCITS采用的参考模型》.pdf

《ANSI ISO 19101-2002 Geographic information Reference model Adopted by INCITS《地理信息.被INCITS采用的参考模型》.pdf》由会员分享，可在线阅读，更多相关《ANSI ISO 19101-2002 Geographic information Reference model Adopted by INCITS《地理信息.被INCITS采用的参考模型》.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、 Reference numberISO 19101:2002(E)ISO 2002INTERNATIONAL STANDARD ISO19101First edition2002-07-01Geographic information Reference model Information gographique Modle de rfrence Adopted by INCITS (InterNational Committee for Information Technology Standards) as an American National Standard.Date of AN

2、SI Approval: 11/21/2002Published by American National Standards Institute,25 West 43rd Street, New York, New York 10036Copyright 2002 by Information Technology Industry Council (ITI).All rights reserved.These materials are subject to copyright claims of International Standardization Organization (IS

3、O), InternationalElectrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council(ITI). Not for resale. No part of this publication may be reproduced in any form, including an electronic retrieval system, withoutthe prior written permission

4、 of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW,Washington, DC 20005.Printed in the United States of AmericaCopyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted wi

5、thout license from IHS-,-,-ISO 19101:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer perfo

6、rming the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PD

7、F file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central S

8、ecretariat at the address given below. ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the

9、 address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.ch Web www.iso.ch Printed in Switzerland ii ISO 2002 All rights reservedCopyright American National Standards In

10、stitute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19101:2002(E) ISO 2002 All rights reserved iiiContents Forewordv Introductionvi 1 Scope 1 2 Conformance1 3 Normative references1 4 Terms and definitions .1 5 Symbols

11、and abbreviated terms 4 5.1 Abbreviations.4 5.2 UML notation5 6 Concepts and organization of the reference model.5 6.1 Integration of geographic information with information technology.5 6.2 Focus of standardization in the ISO 19100 series of geographic information standards .7 6.3 Reference model o

12、rganization .7 6.4 Interoperability of geographic information.8 6.4.1 Definition of interoperability.8 6.4.2 Aspects of interoperability .9 6.4.3 Interoperability in the ISO 19100 series of geographic standards .9 7 Conceptual modelling .10 7.1 Content of this clause .10 7.2 Definition of conceptual

13、 modelling10 7.3 Use of this clause 11 7.4 Specification of conceptual schema language for the ISO 19100 series of geographic information standards.11 7.5 The approach to conceptual modelling.11 7.6 Principles of conceptual modelling .12 7.7 Model integration.13 8 The Domain reference model .13 8.1

14、Content of this clause .13 8.2 Definition of Domain reference model.13 8.3 Uses of the Domain reference model 14 8.4 Overview of the Domain Reference model .14 8.5 Use of abstraction levels in the Domain reference model 16 8.6 Detailed description of the Domain reference model 17 8.6.1 Introduction1

15、7 8.6.2 Application schema.17 8.6.3 Spatial objects and position.19 8.6.4 Reference systems20 8.6.5 Quality.22 8.6.6 Metadata .23 8.6.7 General feature model.24 9 The Architectural reference model 25 9.1 Content of this clause .25 9.2 Definition of the Architectural reference model .26 9.3 Uses of t

16、he Architectural reference model .26 9.4 Overview of the Architectural reference model26 9.4.1 Introduction26 9.4.2 Services and service interfaces .26 9.4.3 Identifying services and service interfaces for geographic information.28 Copyright American National Standards Institute Provided by IHS unde

17、r license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19101:2002(E) iv ISO 2002 All rights reserved9.5 Types of geographic information services .28 9.5.1 Introduction28 9.5.2 Types of information technology services relevant to geographic informati

18、on.28 9.5.3 Extension of service types for geographic information 30 9.5.4 Service types in the ISO 19100 series compared to other service models .30 9.6 Service interfaces and standardization requirements.30 9.6.1 Introduction30 9.6.2 Identifying standardization requirements for geographic informat

19、ion services 31 9.6.3 Fulfilling standardization requirements and the role of profiles 32 9.6.4 Elaboration of standardization requirements .32 9.6.5 Using this procedure to identify requirements for geographic information standards.33 10 Profiles and functional standards34 10.1 Content of this clau

20、se .34 10.2 Profiles and base standards.34 10.3 Modularity concept34 10.4 Use of profiles34 10.5 Product specifications 34 10.6 Relationship of profiles to base standards.34 10.7 Functional standards 35 10.8 Registration of profiles .35 Annex A (informative) The Conceptual Schema Modelling Facility.

21、36 A.1 Introduction36 A.2 The ISO Conceptual Schema Modelling Facility Schema architecture36 A.3 ISO CSMF schema architecture and the ISO 19100 series of geographic information standards .38 Annex B (informative) Focus of standardization in the ISO 19100 series of geographic information standards39

22、Bibliography 41 Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19101:2002(E) ISO 2002 All rights reserved vForeword ISO (the International Organization for Standardization)

23、is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be repres

24、ented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are

25、drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International

26、 Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1

27、9101 was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics. Annexes A and B of this International Standard are for information only. Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted

28、 without license from IHS-,-,-ISO 19101:2002(E) vi ISO 2002 All rights reservedIntroduction Every comprehensive standardization effort needs a reference model to ensure an integrated and consistent approach. This International Standard is a guide to structuring geographic information standards in a

29、way that will enable the universal usage of digital geographic information. This reference model describes the overall requirements for standardization and the fundamental principles that apply in developing and using standards for geographic information. In describing these requirements and princip

30、les, this reference model provides a vision of standardization in which geographic information can be integrated with existing and emerging digital information technologies and applications. This International Standard is intended to be used by information system analysts, program planners and devel

31、opers of geographic information standards that are related to geographic information standards, as well as others in order to understand the basic principles of this series of standards and the overall requirements for standardization of geographic information. Beyond the needs within traditional ap

32、plications of digital geographic information, there is a growing recognition among users of information technology that indexing by location is a fundamental way to organize and to use digital data. Increasingly, digital data from a wide variety of sources is being referenced to locations for use in

33、 a diversity of applications. Consequently, there is an increasing need for standardization of geographic information and services for processing this information. To meet this need, the ISO 19100 series standardizes relevant aspects of the description and management of geographic information and ge

34、ographic information services. This standardization will: increase the understanding and usage of geographic information; increase the availability, access, integration and sharing of geographic information; promote the efficient, effective and economic use of digital geographic information and asso

35、ciated hardware and software systems; contribute to a unified approach to addressing global ecological and humanitarian problems. To achieve these goals, standardization of geographic information in the ISO 19100 series is based on the integration of the concepts of geographic information with those

36、 of information technology. The development of standards for geographic information must consider the adoption or adaptation of generic information technology standards whenever possible. It is only when this cannot be done that geographic information standards need to be developed. This Internation

37、al Standard identifies a generic approach to structuring the ISO 19100 series of standards. This reference model uses concepts obtained from the ISO/IEC Open Systems Environment (OSE) approach for determining standardization requirements described in ISO/IEC TR 14252, the IEC Open Distributed Proces

38、sing (ODP) Reference Model described in ISO/IEC 10746-1 and other relevant ISO standards and technical reports. This International Standard does not prescribe any specific products or techniques for implementing geographic information systems. Copyright American National Standards Institute Provided

39、 by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-INTERNATIONAL STANDARD ISO 19101:2002(E) ISO 2002 All rights reserved 1Geographic information Reference model 1 Scope This International Standard defines the framework for standardizatio

40、n in the field of geographic information and sets forth the basic principles by which this standardization takes place. This framework identifies the scope of the standardization activity being undertaken and the context in which it takes place. The framework provides the method by which what is to

41、be standardized can be determined and describes how the contents of the standards are related. Although structured in the context of information technology and information technology standards, this International Standard is independent of any application development method or technology implementat

42、ion approach. 2 Conformance General conformance and testing requirements for the ISO 19100 series of geographic information standards are described in ISO 19105. Specific conformance requirements are described in individual standards in the ISO 19100 series. 3 Normative reference The following norma

43、tive document contains provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard

44、are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.

45、 ISO/IEC 19501-1:1), Information technology Unified Modeling Language (UML) Part 1: Specification 4 Terms and definitions For the purposes of this International Standard, the following terms and definitions apply. Sources of term definitions not defined in this International Standard are provided. N

46、OTE Throughout this document, certain terms are italicized. These terms are defined either in this clause or in the terms and definitions clause of another part of ISO 19100, as indicated. 4.1 application manipulation and processing of data in support of user requirements 4.2 application schema conc

47、eptual schema for data required by one or more applications 1) To be published. Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19101:2002(E) 2 ISO 2002 All rights reserved4.

48、3 conceptual formalism set of modelling concepts used to describe a conceptual model EXAMPLE UML meta model, EXPRESS meta model. NOTE One conceptual formalism can be expressed in several conceptual schema languages. 4.4 conceptual model model that defines concepts of a universe of discourse 4.5 conc

49、eptual schema formal description of a conceptual model 4.6 conceptual schema language formal language based on a conceptual formalism for the purpose of representing conceptual schemas EXAMPLE UML, EXPRESS, IDEF1X NOTE A conceptual schema language may be lexical or graphical. Several conceptual schema languages can be based on the same conceptual formalism. 4.7 dataset identifiable collectio