ANSI INCITS ISO IEC 24727-1-2007 Identification cards - Integrated circuit card programming interfaces - Part 1 Architecture.pdf

《ANSI INCITS ISO IEC 24727-1-2007 Identification cards - Integrated circuit card programming interfaces - Part 1 Architecture.pdf》由会员分享，可在线阅读，更多相关《ANSI INCITS ISO IEC 24727-1-2007 Identification cards - Integrated circuit card programming interfaces - Part 1 Architecture.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、INCITS/ISO/IEC 24727-1-20072008 (ISO/IEC 24727-1:2007, IDT) Identification cards Integrated circuit cardprogramming interfaces Part 1: ArchitectureINCITS/ISO/IEC 24727-1-20072008(ISO/IEC 24727-1:2007, IDT)INCITS/ISO/IEC 24727-1-20072008 ii ITIC 2008 All rights reserved PDF disclaimer This PDF file m

2、ay contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the res

3、ponsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creat

4、ion parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Adopted by INCITS (InterNational Com

5、mittee for Information Technology Standards) as an American National Standard. Date of ANSI Approval: 1/7/2008 Published by American National Standards Institute, 25 West 43rd Street, New York, New York 10036 Copyright 2008 by Information Technology Industry Council (ITI). All rights reserved. These

6、 materials are subject to copyright claims of International Standardization Organization (ISO), International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council (ITI). Not for resale. No part of this publication may be reprodu

7、ced in any form, including an electronic retrieval system, without the prior written permission of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW, Washington, DC 20005. Printed in the United States of America INCITS/ISO/IEC 24727-1-20072008 ITIC 2008 All

8、 rights reserved iii Contents Page Foreword iv Introduction .v 1 Scope 1 2 Normative references .1 3 Terms and definitions 1 4 Abbreviated terms 3 5 Interoperability .3 6 Architecture 4 6.1 General4 6.2 Architectural attributes 4 6.3 Logical architecture .4 6.4 Protocol independence 5 6.5 Client-app

9、lication service access layer interface .5 6.6 Capability description 6 6.7 Data model 6 6.8 Generic card interface 6 7 Security rationale .7 Annex A (informative) Implementation configuration examples .8 A.1 General8 A.2 Discrete layer configuration. 10 A.3 Combined configuration 11 A.4 On-ICC gene

10、ric card access layer configuration 12 A.5 On-ICC implementation of service access and generic card access layers 13 A.6 Loadable/fixed non-ICC components hosting of capability description 14 A.7 Web service configuration . 15 A.8 Multiple application configuration . 16 A.9 Distributed implementatio

11、n of the stack . 17 A.10 Distributed implementation using a trust mechanism 18 Bibliography 19 INCITS/ISO/IEC 24727-1-20072008 iv ISO/IEC 2007 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specia

12、lized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical com

13、mittees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Internatio

14、nal Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. P

15、ublication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all

16、 such patent rights. ISO/IEC 24727-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Cards and personal identification. ISO/IEC 24727 consists of the following parts, under the general title Identification cards Integrated circuit card programming

17、 interfaces: Part 1: Architecture Part 2: Generic card interface Part 3: Application interface API administration and testing will form the subjects of the future Parts 4 and 5, respectively. INCITS/ISO/IEC 24727-1-20072008 ITIC 2008 All rights reserved v Introduction ISO/IEC 24727 is a set of progr

18、amming interfaces for interactions between integrated circuit cards (ICCs) and external applications to include generic services for multi-sector use. The organization and the operation of the ICC conform to ISO/IEC 7816-4. ISO/IEC 24727 is relevant to ICC applications desiring interoperability amon

19、g diverse application domains. ISO/IEC 24727 defines interfaces such that independent implementations are interoperable. Services may be discoverable through mechanisms detailed in ISO/IEC 24727. ISO/IEC 24727 discovery methods include provisions for a client-application to discover card-application

20、s available for selection on the ICC, information about each card-application. ISO/IEC 24727-1 specifies the conceptual framework. It provides essential background information for the subsequent parts. Developers using ISO/IEC 24727 are encouraged to read this introductory part of ISO/IEC 24727. The

21、 other parts provide technical details of the concepts specified in ISO/IEC 24727-1. ISO/IEC 24727-2 details the functionality and related information structures available to the implementation of the interface defined in ISO/IEC 24727-3. ISO/IEC 24727-3 details service access mechanisms to initiate

22、 their use by a client-application. ISO/IEC 24727-4 will detail trust mechanisms and connectivity mechanisms between adjacent components in the communication stack. ISO/IEC 24727-5 will detail test mechanisms. Functionality for ISO/IEC 24727-3 usually resides outside of the ICC. Functionality for IS

23、O/IEC 24727-2 may reside inside the ICC. AMERICAN NATIONAL STANDARD INCITS/ISO/IEC 24727-1-20072008 ITIC 2008 All rights reserved 1 Identification cards Integrated circuit card programming interfaces Part 1: Architecture 1 Scope ISO/IEC 24727 is a set of programming interfaces for interactions betwe

24、en integrated circuit cards and external applications to include generic services for multi-sector use. The organization and the operation of the ICC conform to ISO/IEC 7816-4. This part of ISO/IEC 24727 specifies system architecture and principles of operation, a capabilities discovery mechanism, s

25、ecurity rationale. ISO/IEC 24727-1 is independent of physical interface technology. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of th

26、e referenced document (including any amendments) applies. ISO/IEC 7816-4:2005 Identification cards Integrated circuit cards Part 4: Organization, security and commands for interchange 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 authentica

27、tion process of assessing a level of confidence in identity or identification 3.2 authentication protocol specific process for authentication 3.3 card integrated circuit card INCITS/ISO/IEC 24727-1-20072008 2 ITIC 2008 All rights reserved 3.4 card-application uniquely addressable set of functionalit

28、ies on an ICC that provide data storage and computational services to a client-application 3.5 client-application processing software needing access to one or more card-application(s) 3.6 data element item of information seen at the interface for which are specified a name, a description of logical

29、content, a format and a coding ISO/IEC 7816-4 3.7 data set named collection of data structures for interoperability 3.8 data structure for interoperability ISO/IEC 7816-4 file identified by a two-byte file identifier or an ISO/IEC 8825 BER-TLV data object identified by an octet string encoding an AS

30、N.1 tag 3.9 differential-identity set of information that comprises a name, a marker, and an authentication protocol 3.10 generic card access layer component which provides an ISO/IEC 24727-2 interface to a service access layer 3.11 identification collective aspect of a set of characteristics and pr

31、ocesses by which an entity is recognizable or known 3.12 interface point at which independent and often unrelated systems meet and act on or communicate with each other 3.13 interoperability ability for any card-application interface that conforms to ISO/IEC 24727 to be used by any client-applicatio

32、n conforming to ISO/IEC 24727 3.14 marker item of information within a differential-identity representing a unique characteristic of an entity 3.15 middleware software that connects two otherwise separate applications 3.16 service set of processing functions available at an interface 3.17 service ac

33、cess layer component which provides an ISO/IEC 24727-3 API to a client-application INCITS/ISO/IEC 24727-1-20072008 ISO/IEC 2007 All rights reserved 3 4 Abbreviated terms AID application identifier ACD application capability description APDU application protocol data unit API application programming

34、interface BER basic encoding rules CCD card capability description DSI data structure for interoperability GCAL generic card access layer GCI generic card interface IAS identity, authentication, and (digital) signature services ICC integrated circuit card IFD interface device OID object identifier P

35、KI public key infrastructure RFU reserved for future use by ISO/IEC SAL service access layer TLV tag-length-value URL uniform resource locator 5 Interoperability Interoperability is the ability for any card-application interface that conforms to ISO/IEC 24727 to be used by any client-application con

36、forming to ISO/IEC 24727. ISO/IEC 24727 defines a set of interfaces and discovery mechanisms such that independent implementations are functionally equivalent as verifiable by testing. ISO/IEC 24727 defines interfaces at two levels between the client-application and a service interface, between a se

37、rvice access layer and a generic card interface. For each specified interface, the relevant parts of ISO/IEC 24727 shall define which functionality shall be supported. ISO/IEC 24727 applies to an ICC providing directly, or indirectly, a capability description. Capability description is described in

38、6.6. INCITS/ISO/IEC 24727-1-20072008 4 ITIC 2008 All rights reserved The service interface, generic card interface, and capability descriptions may be extended according to the future development of ICC technologies. 6 Architecture 6.1 General ISO/IEC 24727 partitions functionality between a client-

39、application running on a host platform and a layered set of services that can be used by a client-application. The organization of services is further defined into a service interface, a generic card interface, and one or more card-applications resident on an ICC. 6.2 Architectural attributes The se

40、rvice interface implements features given in 6.5. The generic card interface implements features given in 6.8. The connectivity interface implements features given in 6.9. The trusted channel interface implements features given in 6.10. Card-applications manage data sets. Each data set is named and

41、the card-application list of data set names is available to the client-application by direct knowledge or discovery. A client-application uses the data set name when requesting a service to be performed on a data set. Access to data sets is controlled through an access control list. The access contr

42、ol list describes the security conditions that shall be satisfied in order to perform an action on the data set. ISO/IEC 24727-3 provides additional detail on access control lists, identities, and actions. Card-applications are organized on an ICC as an alpha card-application and one or more card-ap

43、plications. Card-applications are selectable by AID at the service interface. 6.3 Logical architecture Figure 1 illustrates the relationships between a client-application, the layers and interfaces defined in ISO/IEC 24727, and a card-application resident on an ICC. The flow of requests from the cli

44、ent-application to the card-application is shown as directional arrows indicating either a request or a confirmation. The naming of each arrow conveys functionality being supported by the standard. The actual format and syntax of a request or a confirmation is not detailed in this part of ISO/IEC 24

45、727. INCITS/ISO/IEC 24727-1-20072008 ISO/IEC 2007 All rights reserved 5 ICC ServicesCar d - A p p li ca t i o nSpeci f ic In terface (O u t of Scope )S e rv i c e A c c e s s La y e rGe ne ri c C a rd A c c e s s La y e rServi c e I n te rf a ce I SO/I EC 247 27 - 3Gen er i c Ca rd In terf a ce I SO

46、/I E C 24727 - 2Tr u s tM e c h a n i s m *Tr u s tM e c h a n i s m *A c t i o nR e q u e s tA c t i o nC o n f i r m a t i o nG e n e r i cR e q u e s tG e n e r i cC o n f i r m a t i o nS p e c i f i cR e q u e s tS p e c i f i cC o n f i r m a t i o nClie n t - A p p lic a t i o n(*)Note: No n

47、e, o n e or b ot h of th ese m ech a nism s m ay e x i stFigure 1 Logical architecture of ISO/IEC 24727 Functionality of ISO/IEC 24727 can be implemented in more than one manner. 6.4 Protocol independence ISO/IEC 24727 defined interfaces are specified in a manner independent of the protocols require

48、d to establish the communication between the client-application and card-application. Figure 1 shows a stack of layers and interfaces. A proxy is an implementation of the interface of a stack element to allow the stack element implementation to be split. For example, card-application in Figure 1 is

49、a proxy for the actual card. See Annex A for details on the configurations of implementations of the stack. 6.5 Client-application service access layer interface ISO/IEC 24727-3 provides a detailed description of the service interface available to a client-application. An implementation of the service interface translates an action request into one or more generic requests, INCITS/ISO/IEC 24727-1-20072008 6 ITIC 2008 All rights reserved translates one or more generic confirmations into an