ANSI IEEE N42.43-2016 Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security.pdf

《ANSI IEEE N42.43-2016 Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security.pdf》由会员分享，可在线阅读，更多相关《ANSI IEEE N42.43-2016 Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、 American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security Sponsored by the National Committee on Radiation Instrumentation, N42 IEEE 3 Park Avenue New York, NY 10016-5997 USA Accredited by the American National Standards Institute ANS

2、I N42.43-2016(Revision of ANSI N42.43-2006) ANSI N42.43-2016 (Revision of ANSI N42.43-2006) American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security Sponsor National Committee on Radiation Instrumentation, N42 Accredited by the Americ

3、an National Standards Institute Secretariat Institute of Electrical and Electronics Engineers, Inc. Approved 26 April 2016 American National Standards Institute Abstract: The operational and performance requirements for transportable and/or mobile radiation monitors used in homeland security applica

4、tions are specified in this standard. Transportable radiation monitors are designed to be transported to a location and used for a specific task or for a specified period of time and do not require permanent mounting platforms. Mobile monitors are those monitors that are typically in operation on a

5、platform that is in motion. Keywords: ANSI N42.43, mobile radiation monitors, transportable radiation monitors xThe Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All ri

6、ghts reserved. Published 25 May 2016. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent (978) 750-8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Impo

7、rtant Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notice” or

8、 “Important Notices and Disclaimers Concerning IEEE Standards Documents.” Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed within IEEE Societies and th

9、e Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by the American National Standards Institute (“ANSI”), which brings together volunteers representing vari

10、ed viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independe

11、ntly evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims all warranties (express, implied and stat

12、utory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims

13、any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, ma

14、rket, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In

15、 publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, s

16、hould rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, IN

17、CIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIG

18、ENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in Englis

19、h only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be

20、considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear

21、that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does

22、not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is import

23、ant that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the m

24、atter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address

25、: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory

26、requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing

27、 so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private

28、 self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate

29、 fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222

30、Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that t

31、hese documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, cor

32、rigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present

33、 state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Webs

34、ite at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on

35、the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent right

36、s. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on

37、the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstr

38、ably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inqu

39、iries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advise

40、d that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time it approved this standard, the Accredited Standards Committe

41、e on Radiation Instrumentation, N42, had the following membership: Michael P. Unterweger, Chair Sue Vogel, Administrative Secretary Organization Represented Name of Representative Canberra . Robert Huckins Commerce Dept., U.S. NIST Leticia Pibida Commerce Dept., U.S. NIST Leticia Pibida Computer Dep

42、endability Associates, LLC . Gary Johnson Consultant Frank X. Masse Department of Homeland SecurityPeter Shebell Harvard University Joseph Ring Health Physics Society .Wayne M. Glines Department of Homeland SecurityPeter Shebell Harvard University Joseph Ring Health Physics Society .Wayne M. Glines

43、Institute of Electrical they do not require permanent mounting platforms; may be mounted to a vehicle such as a trailer; and are only used when the vehicle is stationary. Mobile radiation monitors are typically in operation on a platform that is in motion but that can also be used while stationary.

44、Mobile monitors may be mounted in vehicles including, for example, trailers. 1.2 Purpose This standard specifies the operational and performance requirements for transportable and mobile radiation monitors used in homeland security applications. Operational requirements established by this standard

45、include radiation detection and radionuclide identification, and those requirements associated with the expected electrical, mechanical, and environmental conditions while in transit and when deployed. The tests described in this standard provide a means to help ensure that a monitor meets the requi

46、rements stated. ANSI N42.43-2016 American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security Copyright 2016 IEEE. All rights reserved. 2 2. Normative references The following referenced documents are indispensable for the application of

47、this document (i.e., they must be understood and used, so each referenced document is cited in text and its relationship to this document is explained). For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendmen

48、ts or corrigenda) applies. ANSI N42.42, American National Standard Data Format Standard for Radiation Detectors Used for Homeland Security.1ASTM B152, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar.2FCC Part 15, Code of Federal Regulations, Title 47, Part 15 (47 CFR 15). IAEA

49、Safety Guide No. RS-G-1.9, Categorization of Radioactive Sources.IEC 60068-2-1, Environmental testingPart 2-1: TestsTest A: Cold.3IEC 60068-2-2, Environmental testingPart 2-2: TestsTest B: Dry heat. IEC 60068-2-11, Basic environmental testing proceduresPart 2-11: TestsTest Ka: Salt mist. IEC 60068-2-18, Environmental testingPart 2-18: TestsTest R and guidance: Water. IEC 60068-2-64, Environmental testingPart 2-64: TestsTest Fh: Vibration, broadband random and guidance. IEC 60068-2-66, Environmental testingPart 2: Test methodsTest Cx: Damp heat, steady state (unsaturated p