ANSI IEEE 1532-2002 Standard for In-System Configuration of Programmable Devices (IEEE Computer Society Document)《可编程设备的系统内配置标准》.pdf

《ANSI IEEE 1532-2002 Standard for In-System Configuration of Programmable Devices (IEEE Computer Society Document)《可编程设备的系统内配置标准》.pdf》由会员分享，可在线阅读，更多相关《ANSI IEEE 1532-2002 Standard for In-System Configuration of Programmable Devices (IEEE Computer Society Document)《可编程设备的系统内配置标准》.pdf（149页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Std 1532-2002(Revision of IEEE Std 1532-2001) IEEE Standards1532TMIEEE Standard for In-SystemConfiguration of ProgrammableDevicesPublished by The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USA10 January 2003IEEE Computer SocietySponsored by th

2、eTest Technology Technical CouncilIEEE StandardsPrint: SH95071PDF: SS95071The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2003 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 10 January 2003.

3、 Printed in the United States of America.Print:ISBN 0-7381-3507-0 SH95071PDF:ISBN 0-7381-3508-9 SS95071No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.IEEE Std 1532-2002(Revision ofIEEE S

4、td 1532-2001)IEEE Standard for In-System Configuration of Programmable DevicesSponsorTest Technology Technical Councilof theIEEE Computer SocietyApproved 11 December 2002IEEE-SA Standards BoardAbstract:The communication protocol described by IEEE Std 1149.1TM-2001 (Standard Test Ac-cess Port and Bou

5、ndary-Scan Architecture) has been adopted by this standard for providingstandardized programming access and methodology for programmable integrated circuit devices.Devices that implement this standard will first be compliant with IEEE Std 1149.1-2001, which isused for testing purposes. A device, or

6、set of devices, implementing this standard can be pro-grammed (written), read back, erased, and verified, singly or concurrently, with a standardized setof resources. Sample implementation and application details (which are not part of this standard)are included for illustrative purposes.Keywords:co

7、mplex programmable logic device (CPLD), erasable programmable read-only mem-ory (EPROM), field programmable gate array (FPGA), Flash RAM, in-system (or in situ)configuration (ISC), programmable deviceAmerican National Standard (ANSI)Recognized as anIEEE Standardsdocuments are developed within the IE

8、EE Societies and the Standards Coordinating Committees of theIEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensusdevelopment process, approved by the American National Standards Institute, which brings together volunteers representingvaried viewpo

9、ints and interests to achieve the final product. Volunteers are not necessarily members of the Institute andserve without compensation. While the IEEE administers the process and establishes rules to promote fairness in theconsensus development process, the IEEE does not independently evaluate, test

10、, or verify the accuracy of any of theinformation contained in its standards.Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or otherdamage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or in

11、directly resultingfrom the publication, use of, or reliance upon this, or any other IEEE Standard document.The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaimsany express or implied warranty, including any implied warranty of mercha

12、ntability or fitness for a specific purpose, or thatthe use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.”The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market,or pr

13、ovide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at thetime a standard is approved and issued is subject to change brought about through developments in the state of the art andcomments received from users of the standard. Every IEEE Stan

14、dard is subjected to review at least every five years forrevision or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable toconclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are caut

15、ionedto check to determine that they have the latest edition of any IEEE Standard.In publishing and making this document available, the IEEE is not suggesting or rendering professional or other servicesfor, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed b

16、y any other person orentity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of acompetent professional in determining the exercise of reasonable care in any given circumstances.Interpretations: Occasionally questions may arise regarding the m

17、eaning of portions of standards as they relate to specificapplications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepareappropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ens

18、ure that anyinterpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of itssocieties and Standards Coordinating Committees are not able to provide an instant response to interpretation requestsexcept in those cases where the matter has previou

19、sly received formal consideration. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation withIEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriatesupporting comments. Comm

20、ents on standards and requests for interpretations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LaneP.O. Box 1331Piscataway, NJ 08855-1331USAAuthorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute ofElectrical and E

21、lectronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. Toarrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive,Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any

22、 individual standard for educationalclassroom use can also be obtained through the Copyright Clearance Center.Note: Attention is called to the possibility that implementation of this standard may require use of subjectmatter covered by patent rights. By publication of this standard, no position is t

23、aken with respect to theexistence or validity of any patent rights in connection therewith. The IEEE shall not be responsible foridentifying patents for which a license may be required by an IEEE standard or for conducting inquiries into thelegal validity or scope of those patents that are brought t

24、o its attention.Copyright 2003 IEEE. All rights reserved.iiiIntroduction(This introduction is not part of IEEE Std 1532-2002, IEEE Standard for In-System Configuration of ProgrammableDevices.)The development of this standard began with a preliminary meeting held 19 April 1996. There, a group ofProgr

25、ammable Device vendors and users discussed the possibility of standardizing the programming processfor these devices. Subsequent meetings were held regularly and agreement was developed for basing theprogramming process upon the IEEE Std 1149.1 communication protocol, because many of these deviceswe

26、re expected to support IEEE Std 1149.1 for testing purposes. This group adopted as its mission:To define, document, and promote the use of a standardized process and methodology forimplementing programming capabilities within programmable integrated circuit devices, utilizing(and compatible with) th

27、e IEEE Std 1149.1 communication protocol. This standard would allow theprogramming of one or more compliant devices concurrently, while mounted on a board orembedded in a system, known as “In-System Configuration.” Concurrent programming may oftenresult in significant programming time efficiencies.

28、The In-System feature would address the need toconfigure or reconfigure, read back, verify or erase programmable devices after they have beeninstalled by a manufacturing process. This eliminates handling damage and the need formanufacturing steps and inventory management related to preprogrammed dev

29、ices.This work received the support of the IEEE Std 1149.1 Working Group which ultimately urged that thiseffort become its own standard within the Test Technology Technical Committee of the IEEE ComputerSociety, in July of 1998. The initially approved version of this standard described the necessary

30、 hardwareelements for compliance. By making this available quickly and early, the development of compliant siliconwas facilitated and its availability accelerated. The next revision of this standard described the softwareelements necessary for full implementation of this standard. The software eleme

31、nts described includeextensions to the BSDL file that describe the programming algorithm and hardware implementation of thisstandard. Additionally a new data file format has been described. This revision further extends the standardby adding support for devices that require adaptive programming algo

32、rithms along with some slightmodifications to the initial standard that will help to better meet users needs. ivCopyright 2003 IEEE. All rights reserved.Following is a list of participants in the In-System Configuration Working Group of the Test TechnologyTechnical Council. Voting members at the tim

33、e of publication are marked with an asterisk (*).Neil G. Jacobson,ChairDavid Bonnet,Vice-ChairDennis Lia, SecretaryMark Moyer, EditorKenneth P. Parker, Editor EmeritusThe following members of the balloting committee voted on this standard. Balloters may have voted forapproval, disapproval, or absten

34、tion. Turgut AbaciogluJohn AndrewsDon ArnoldBill AronsonMarco BarahmandJason Baumbach*Glenn BaxterMenachem BlasbergTerry BorrozStephen BrownIan BryantSteven ButkovichTapan ChakrabortySung Chung*C. J. Clark*Ray Dellecker *Yadvindra DhamiWim Driessen*Alon DroryTed Eaton*Rob EcclesPeter van den Eijnden

35、Bernardo ElaydaP. D. FelenJudy Chen FengDan GravitzJack Griffin*Kurt GuntherothPeter HansenSteve HarrisonBernie HaverkampAlan Herrmann*Brad Ishihara*John JoyRaj KamdarDoug KayArthur KhuPeter LarsenBertrand LeighFrank LienKeith LoftstromPatrick McHughG. MeijerinkMatthew MurphyGary OBrienDavid PaulBru

36、ce PetersonEtienne RacineBapcha RamamurthyDoug RaymondJacky RenauxRobert RussellDavid Lee RutledgeBobbie SavilleSanjeev Sharma*Steve StarkChung SunJerry TalenHoward Tang*Elke TiemeyerDouglas Way*Thomas WenzelMike WestermeierKevin WibleBill WilkieCarmy YellinDan YoungPiotr ZbysinskiMorris BalamutRoge

37、r BennettsDavid BonnettTerry BorrozTapan ChakrabortyKeith ChowC. J. ClarkLuis E. CordovaFrans De JongHeiko EhrenbergPeter van den EijndenKazumi HatayamaNeil G. JacobsonAdam LeyDennis LiaYinghua MinMark MoyerBenoit Nadeau-DostieBruce PetersonMike RicchettiGordon RobinsonRobert RussellDouglas WayCopyr

38、ight 2003 IEEE. All rights reserved.vWhen the IEEE-SA Standards Board approved this standard on 11 December 2002, it had the followingmembership:James T. Carlo,ChairJames H. Gurney,Vice ChairJudith Gorman,Secretary*Member EmeritusAlso included is the following nonvoting IEEE-SA Standards Board liais

39、on:Alan Cookson, NIST RepresentativeSatish K. Aggarwal, NRC RepresentativeNoelle D. HumenickIEEE Standards Project EditorSid BennettH. Stephen BergerClyde R. CampRichard DeBlasioHarold E. EpsteinJulian Forster*Howard M. FrazierToshio FukudaArnold M. GreenspanRaymond HapemanDonald M. HeirmanRichard H

40、. HulettLowell G. JohnsonJoseph L. Koepfinger*Peter H. LipsNader MehravariDaleep C. MohlaWilliam J. MoylanMalcolm V. ThadenGeoffrey O. ThompsonHoward L. WolfmanDon WrightviCopyright 2003 IEEE. All rights reserved.Contents1. Overview 11.1 Scope 11.2 Organization of the standard 11.3 Context. 21.4 Obj

41、ectives 22. References 33. Definitions and acronyms 33.1 Definitions 33.2 Acronyms. 94. System modal states. 94.1 Definition of system modal states 104.2 Description of system modal state transitions . 124.3 System modal state transition timing.154.4 System I/O pin behavior 185. ISC architecture . 2

42、25.1 Overview 225.2 Specification 355.3 Description. 386. ISC Instructions . 396.1 General properties of ISC instructions.396.2 Mandatory ISC instructions . 466.3 Optional ISC programming instructions 526.4 Optional ISC program control/security instructions 596.5 Optional address/data access instruc

43、tions 636.6 Requirements for IEEE Std 1149.1-2001 masters and ISC programming algorithms 686.7 Adding new instructions for ISC programming support 707. Data registers . 707.1 Device identification register. 717.2 Bypass register. 727.3 Boundary scan register. 727.4 ISC_Default . 727.5 ISC_Config 737

44、.6 ISC_PData 747.7 ISC_RData . 747.8 ISC_Sector . 747.9 ISC_Info. 747.10 ISC_Data 757.11 ISC_Address 757.12 ISC_Inc 75Copyright 2003 IEEE. All rights reserved.vii8. Conformance and documentation requirements758.1 Conformance758.2 Documentation.768.3 BSDL extension for ISC description (STD_1532_2002)

45、788.4 ISC extension structure798.5 ISC BSDL attribute definitions819. Data file format1109.1 Data file syntax specification.1109.2 Description.1139.3 Mapping data onto a flow1149.4 Merging flows for concurrent programming.1159.5 Data file transmission CRC calculation.117Annex A (informative) Use of

46、device features119Annex B (informative) ISC programming flows.123Annex C (informative) Example ISC BSDL/data file.134Copyright 2003 IEEE. All rights reserved.1IEEE Standard for In-System Configuration of Programmable Devices1. Overview1.1 ScopeThis standard describes a series of mandatory and option

47、al programming instructions and associated dataregisters that define a standard methodology for accessing and configuring programmable devices. Theseadditional registers and instructions extend the capabilities of devices that comply with IEEE Std 1149.1TM-2001 such that the IEEE Std 1149.1-2001 Tes

48、t Access Port may be used for configuration activities. A datadescription format and extensions to Boundary-Scan Description Language (BSDL) are also specified thatprovide for the development of standardized automation tools for device programming.1.2 Organization of the standardThis standard is div

49、ided into nine clauses and three annexes, as follows: Clause 1 describes the scope, context, objectives, and organization of this standard. Clause 2 provides references to other IEEE documentation needed to understand this document. Clause 3 defines terms and acronyms used in this standard. Clause 4 defines the variations of system state that are unique to programmable logic devices. Clause 5 describes the general architecture of an in-system configurable (ISC) device. Clause 6 describes the ISC instruction set. Clause 7 describes the ISC register set and the operation