ANSI CSA C22.2 NO.45.1-7-2007 Electrical Rigid Metal Conduit - Steel (Second Edition Update No 1 November 2010 Update No 2 November 2014).pdf

《ANSI CSA C22.2 NO.45.1-7-2007 Electrical Rigid Metal Conduit - Steel (Second Edition Update No 1 November 2010 Update No 2 November 2014).pdf》由会员分享，可在线阅读，更多相关《ANSI CSA C22.2 NO.45.1-7-2007 Electrical Rigid Metal Conduit - Steel (Second Edition Update No 1 November 2010 Update No 2 November 2014).pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、C22.2 No. 45.1-07(reaffirmed 2017)Electrical Rigid Metal Conduit SteelLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers represen

2、ting varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityT

3、his document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any thir

4、d partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL

5、 CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE

6、, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POS

7、SIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The i

8、nformation in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-pr

9、ofit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether i

10、t be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not s

11、uch inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or ot

12、hers to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject

13、 of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being pro

14、vided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limi

15、ted copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Not

16、ice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and

17、 if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Update No. 2C22.2 No. 45.1-07November 2014Note: For information about the Standards Update Service, go to shop.csa.ca or e-mail

18、 techsupportcsagroup.org.Title: Electrical Rigid Metal Conduit Steel originally published November 2007The following revisions have been formally approved and are marked by a vertical line in the margin on the attached replacement pages: Update your copy by inserting these revised pages.Keep the pag

19、es you remove for reference.Revised Title page, copyright page, Preface, and Clauses 7.6, 7.7, 7.10, and 7.11New NoneDeleted NoneNational Association of Standardization and Certification of theElectrical SectorNMX- J-534-ANCESecond EditionCSA GroupCSA C22.2 No. 45.1-07Second EditionUnderwriters Labo

20、ratories Inc.UL 6Fourteenth EditionElectrical Rigid Metal Conduit SteelNovember 30, 2007(Title Page Reprinted: November 14, 2014)ANSI/UL 6-2014Commitment for AmendmentsThis standard is issued jointly by the Association of Standardization and Certification (ANCE), theCanadian Standards Association (o

21、perating as “CSA Group”) and Underwriters Laboratories Inc. (UL).Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSAGroup, or UL at any time. Revisions to this standard will be made only after processing according tothe standards development procedures of AN

22、CE, CSA Group, and UL. CSA Group and UL will issuerevisions to this standard by means of revised or additional pages bearing their date of issue. ANCEwill incorporate the same revisions into a new edition of the standard bearing the same date of issueas the CSA and UL pages.Copyright 2014 ANCERights

23、 reserved in favor of ANCEISBN 978-1-55436-520-3 2007 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.This Standard is subject to periodic review, and suggestions for its improvement will be referred to t

24、heappropriate committee. To submit a proposal for change, please send the following information toinquirescsagroup.org and include “Proposal for change” in the subject line: Standard designation(number); relevant clause, table, and/or figure number; wording of the proposed change; and rationalefor t

25、he change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atwww.shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2014 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a

26、 Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the 14th Edition, including revisions through November14, 2014. The most rec

27、ent designation of ANSI/UL 6 as an American National Standard (ANSI)occurred on November 14, 2014. ANSI approval for a standard does not include the Cover Page,Transmittal Pages, Title Page (front and back), or the Preface.The Department of Defense (DoD) has adopted UL 6 on May 10, 1982. The publica

28、tion of revisedpages or a new edition of this Standard will not invalidate the DoD adoption.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System

29、 (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-888-853-3503.CONTENTSPreface .41 Scope .62 Normative references 63 Definitions 64 Units of measurement .75 Construction 75.1 Tube 75.2 Finished conduit 85.3 Protective coatings .95.4 Threading and chamfering 115

30、.5 Nipples .135.6 Elbows .145.7 Threaded couplings 146 Test requirements 176.1 Tube .176.2 Protective coatings 177 Markings 25Annex A (normative)A.1 Normative References 32Annex B (informative)B.1 Dimensions of ERMC-S .35Annex C (informative)C.1 Coating tests overview .36Annex D (informative)D.1 Exa

31、mination of finished product by manufacturer 37Annex E (informative)E.1 Alternative National Markings 38NOVEMBER 30, 2007 NMX- J-534-ANCE-2007 CSA C22.2 NO. 45.1-07 UL 6 3PrefaceThis is the common ANCE, CSA Group, and UL standard for electrical rigid metal conduit steel. It is thesecond edition of N

32、MX-J-534-ANCE, the second edition of CSA C22.2 No. 45.1, and the 14th edition ofUL 6. This edition of CSA C22.2 No. 45.1 supersedes the previous edition published in 2004. This editionof UL 6 supersedes the previous edition published June 30, 2004.This common standard was prepared by the Association

33、 of Standardization and Certification (ANCE),CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the conduit manufacturingindustry and the Technical Harmonization Subcommittee for Conduit and Tubing of the Council of theHarmonization of Electrotechnical Standards for the N

34、ations of the Americas (CANENA) are gratefullyacknowledged.This standard is considered suitable for use for conformity assessment within the stated scope of thestandard.The present Mexican standard was developed by CT Technical Committee 23 Electrical Accessories fromthe Comite de Normalizacion de l

35、a Asociacion de Normalizacion y Certificacion, A.C., CONANCE, with thecollaboration of the metal conduit and tubing manufacturers and users.This standard was reviewed by the CSA Subcommittee on Metal Conduit and Tubing, under thejurisdiction of the CSA Technical Committee on Wiring Products and the

36、CSA Strategic SteeringCommittee on Requirements for Electrical Safety, and has been formally approved by the CSA TechnicalCommittee.This standard has been approved by the American National Standards Institute as an American NationalStandard.Application of StandardWhere reference is made to a specifi

37、c number of samples to be tested, the specified number is to beconsidered a minimum quantity.Note: Although the intended primary application of this standard is stated in its scope, it is important to note thatit remains the responsibility of the users of the standard to judge its suitability for th

38、eir particular purpose.Level of harmonizationThis standard uses an IEC format, but is not based on, nor is it to be considered an IEC standard. Thisstandard is published as an equivalent standard for ANCE, CSA Group, and UL. An equivalent standardis a standard that is substantially the same in techn

39、ical content, except as follows: Technical nationaldifferences are allowed for codes and governmental regulations as well as those recognized as being inaccordance with NAFTA Article 905, for example, because of fundamental climatic, geographical,technological, or infrastructural factors, scientific

40、 justification, or the level of protection that the countryconsiders appropriate. Presentation is word for word except for editorial changes.Reasons for differences from IECThe Technical Harmonization Subcommittee identified several IEC standards that address electricalconduit and tubing included in

41、 the scope of this standard. The IEC standards for electrical conduit andtubing are recognized as being generally system-specific, containing the requirements for the relevantconduits and cables and associated fittings in several discrete IEC standards.NOVEMBER 14, 2014NMX- J-534-ANCE-2007 CSA C22.2

42、 NO. 45.1-07 UL 64The THSC determined the safe use of electrical conduit and tubing is dependent on the design andperformance of the conduit and tubing systems with which they are intended to be installed. Significantinvestigation is required to assess safety and system compatibility issues that may

43、 lead to harmonizationof traditional North American electrical conduit and tubing and associated fittings with those presentlyaddressed in the known IEC standards. The THSC agreed such future investigation might be facilitatedby completion of harmonization of the North American standards for electri

44、cal conduit and tubing and theirfittings.InterpretationsThe interpretation by the standards development organization of an identical or equivalent standard shallbe based on the literal text to determine compliance with the standard in accordance with the proceduralrules of the standards development

45、organization. If more than one interpretation of the literal text has beenidentified, a revision shall be proposed as soon as possible to each of the standards developmentorganizations to more accurately reflect the intent.ANCE Effective DateThe effective date for ANCE will be announced through the

46、Diario Oficial de la Federacin (OfficialGazette) and is indicated on the cover page.CSA Group Effective DateThe effective date for CSA International will be announced through a CSA Informs or CSA GroupCertification Notice.UL Effective DateAs of November 14, 2014 all products Listed or Recognized by

47、UL must comply with the requirements inthis standard.A UL effective date is established by Underwriters Laboratories Inc. and is not part of the ANSI approvedstandard.NOVEMBER 14, 2014 NMX- J-534-ANCE-2007 CSA C22.2 NO. 45.1-07 UL 6 5Electrical Rigid Metal Conduit Steel1 Scope1.1 These requirements

48、cover electrical rigid metal conduit steel (ERMC-S), elbows, couplings, andnipples for use as a metal raceway for installation of wires and cables in accordance with CSA C22.1,Canadian Electrical Code, Part 1, NOM-001-SEDE, Standard for Electrical Installations, and NFPA 70,National Electrical Code

49、(see Reference Item No. 1, Annex A). ERMC-S is provided with a zinc,zinc-based, nonmetallic, or other alternate corrosion-resistant exterior coating and an organic or zincinterior coating. It is the users responsibility to determine the appropriate product for their application.1.2 Non-ferrous and stainless steel conduit are covered by the standards listed in Reference Item No. 2,Annex A.2 Normative references2.1 Products covered by this standard shall comply with the reference installation codes