ANSI CSA C22.2 NO.243-17-2017 Vacuum cleaners blower cleaners and household floor finishing machines (Sixth Edition).pdf

《ANSI CSA C22.2 NO.243-17-2017 Vacuum cleaners blower cleaners and household floor finishing machines (Sixth Edition).pdf》由会员分享，可在线阅读，更多相关《ANSI CSA C22.2 NO.243-17-2017 Vacuum cleaners blower cleaners and household floor finishing machines (Sixth Edition).pdf（261页珍藏版）》请在麦多课文档分享上搜索。

1、C22.2 No. 243-17Vacuum cleaners, blower cleaners, and household floor finishing machinesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process b

2、rings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standard

3、s.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantabil

4、ity, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applic

5、able statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT

6、LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE

7、OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any

8、 duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance

9、 on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual

10、property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrar

11、y), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws th

12、at protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this docume

13、nt.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity

14、 of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load thi

15、s document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if

16、this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do no

17、t agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms an

18、d conditions of this Legal Notice.Standards Update ServiceC22.2 No. 243-17September 2017Title: Vacuum cleaners, blower cleaners, and household floor finishing machinesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID th

19、at you will need to register for updates to this publication is 2425383.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.CSA GroupCSA C22.2 No. 243-1

20、7Sixth EditionUnderwriters Laboratories Inc.UL 1017Tenth EditionVacuum Cleaners, Blower Cleaners, and Household Floor FinishingMachinesSeptember 15, 2017ANSI/UL 1017-2017Commitment for AmendmentsThis standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”), andUnde

21、rwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standardmay be submitted to CSA Group, or UL at anytime. Revisions to this standard will be made only afterprocessing according to the standards development procedures of CSA Group, and UL. CSA Groupand UL will i

22、ssue revisions to this standard by means of a new edition or revised or additional pagesbearing their date of issue.ISBN 978-1-4883-0865-9 2017 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.This Standar

23、d is subject to review five years from the date of publication, and suggestions for itsimprovement will be referred to the appropriate committee. To submit a proposal for change, pleasesend the following information to inquirescsagroup.org and include Proposal for change in thesubject line: Standard

24、 designation (number); relevant clause, table, and/or figure number; wording ofthe proposed change; and rationale for the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2017 Under

25、writers Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This A

26、NSI/UL Standard for Safety consists of the Tenth Edition. The most recent designation ofANSI/UL 1017 as an American National Standard (ANSI) occurred on September 15, 2017.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted

27、 via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at https:/.To purchase UL Standards, visit ULs Standards Sales Site at http:/ or call toll-free 1-888-853-3503.CONTENTSPREFACE 71 Scope .82 General 92.1 Attachments .92.2 Fluids Proprietary 102.3 Instructions pro

28、vided with the appliance 112.4 Secondary circuits .112.5 Equipment for recreational vehicle or marine vessel installation .112.6 Units of measurement 112.7 Reference publications .113 Definitions 204 Construction .234.1 Components 234.2 Enclosures .254.3 Mechanical assembly 314.4 Corrosion protectio

29、n .324.5 Supply connections 334.6 Current-carrying parts 414.7 Internal wiring and external interconnections 414.8 Electrical insulation 454.9 Motors .464.10 Switches, relays, and similar controls .494.11 Controls End product test parameters .534.12 Capacitors .564.13 Lampholders .574.14 Receptacles

30、 .584.15 Spacings 604.16 Grounding and bonding .634.17 Protective devices 644.18 Heating elements Vacuum with steam-cleaning attachment 664.19 Thermal links 664.20 Protection against injury to persons .665 Tests .735.1 General 735.2 Normal loads .735.3 Leakage current .775.4 Leakage current followin

31、g humidity conditioning .785.5 Leakage current Abnormal operating conditions .795.6 Starting current 795.7 Rating .805.8 Temperature 805.9 Severe operating conditions 825.10 Abnormal operation .825.11 Dielectric voltage-withstand test 845.12 Resistance to moisture 855.13 Stability .975.14 Strain rel

32、ief 985.15 Switches, relays, and similar controls .985.16 Cord reel flexing .99SEPTEMBER 15, 2017 CSA C22.2 NO. 243-17 UL 1017 35.17 Power-supply cord flexing 1005.18 Internal wiring and interconnecting cord flexing .1015.19 Physical abuse .1025.20 Strength of handles .1055.21 Polymeric enclosure pa

33、rts 1055.22 Polymeric materials used as structural support 1115.23 Adhesives 1115.24 Thermoplastic motor insulation systems 1125.25 End-product arc resistance .1145.26 Abnormal overload 1145.27 Glow-wire end-product test .1155.28 Blower cleaner impeller tests .1155.29 Integral insulation .1165.30 Te

34、sting of temperature control devices used in a vacuum with a steam-cleaningattachment .1175.31 Mechanical valve endurance test 1185.32 General purpose transformers 1185.33 Interlock system endurance Floor sweepers 1196 Double Insulation .1196.1 Scope 1196.2 Definitions .1206.3 Construction general 1

35、206.4 Reinforced insulation .1216.5 Power supply cord 1246.6 Strain relief 1246.7 Bushings 1246.8 Capacitors .1246.9 Extra-low voltage circuits .1246.10 Spacings .1246.11 Internal wiring .1246.12 Leakage-current test .1256.13 Dielectric voltage-withstand test .1266.14 Insulation resistance .1266.15

36、Resistance to impact test 1276.16 Abnormal operation test 1276.17 Overload test on motors .1276.18 Investigation of armature employing reinforced insulation 1286.19 Resistance to moisture test .1296.20 Manufacturing and production tests .1297 Rechargeable Battery-Powered Appliances 1298 Current-carr

37、ying hoses and accessory electrified wall valves .1318.1 Scope 1318.2 Construction General .1328.3 Tests General 1338.4 Dielectric voltage-withstand test 1338.5 Leakage-current test 1348.6 Oven conditioning test 1348.7 Voltage drop test .1348.8 Temperature test .1358.9 Overload test 1358.10 Limited

38、overcurrent test 1358.11 Crushing test .1368.12 Thermal shock test 137SEPTEMBER 15, 2017CSA C22.2 NO. 243-17 UL 101748.13 Flexing test .1378.14 Abrasion test .1388.15 Wet pick-up 1398.16 Endurance test .1408.17 Grounded hose tests 1408.18 Marking 1418.19 Marking 1419 Appliances Generating Ultraviole

39、t (UV) Radiation .1429.1 General .1429.2 Construction .1429.3 Protection against injury to persons .1439.4 Performance .1449.5 Markings 1479.6 Instructions 14810 Manufacturing and Production Tests .14810.1 Dielectric voltage-withstand .14810.2 Grounding-continuity .15011 Marking 15011.1 General 1501

40、1.2 Permanence 15111.3 Details .15211.4 Cautionary .15411.5 Cord tags 15812 Instruction Manual .15912.1 General 16012.2 Instructions pertaining to a risk of fire, electric shock, or injury to persons 16012.3 Grounding/double insulation instructions .16612.4 Polarization instructions 16812.5 Installa

41、tion and operating instructions 16812.6 User-maintenance instructions 17112.7 Proprietary fluid instructions 171ANNEX A (Normative)A1 Probe Tolerances .213ANNEX B (Normative) Tab TerminalsB1 General 214B2 Material Requirements .214B3 Dimensional Requirements .214ANNEX C (Normative)C1 International S

42、ymbols 220ANNEX D (Informative) Secondary Circuits and the Level of Evaluation RequiredD1 General 221SEPTEMBER 15, 2017 CSA C22.2 NO. 243-17 UL 1017 5D2 Class 2 Circuits .222D3 Limited Voltage/Current Circuits .223D4 Limited Voltage Circuit Requirements 224D5 Limited Energy Circuits 225D6 Limiting I

43、mpedance Circuits 226D7 Safety Extra-Low Voltage Circuits .228D8 Secondary Circuit Tests 228D8.1 General 228D8.2 Maximum voltage .229D8.3 Maximum current test for inherently limited circuits 229D8.4 Maximum power (limited energy) test 230D8.5 Limited power point determination test .230D8.6 Power dis

44、sipation test .231D8.7 Component failure 231ANNEX E (Informative)E1 Test Carpet and Padding Specifications 233ANNEX F (Informative)F1 Flowchart For Polymeric Fluid Handling Components (PFHC) .234ANNEX G (Informative) Methods of Applying ISO 13849-1 to AppliancesG1 General 236G2 Risk Assessment 236G3

45、 Residual Risk Analysis .236G4 Performance Levels .237ANNEX HFrench Language MarkingsThis ANNEX is provided for information onlySEPTEMBER 15, 2017CSA C22.2 NO. 243-17 UL 10176PREFACEThis is the harmonized CSA Group, and UL standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing

46、Machines. It is the sixth edition of CSA C22.2 No. 243, and the tenth edition of UL 1017. This edition of CSA C22.2 No. 243 supersedes the previous edition(s) published in 2015. This edition of UL 1017 supersedes the previous edition(s) published in 2015.This harmonized standard was prepared by the

47、CSA Group and Underwriters Laboratories Inc. (UL). Theefforts and support of the Vacuum Cleaner industry of both the USA and Canada are gratefullyacknowledged.This standard is considered suitable for use for conformity assessment within the stated scope of thestandard.This standard was reviewed by t

48、he CSA Integrated Committee on Electrical Motor- and Battery-OperatedCleaning Appliances for Industrial and Commercial Use, under the jurisdiction of the CSA TechnicalCommittee on Consumer and Commercial Products and the CSA Strategic Steering Committee onRequirements for Electrical Safety, and has

49、been formally approved by the CSA Technical Committee.This standard has been approved by the American National Standards Institute (ANSI) as an AmericanNational Standard.Application of StandardWhere reference is made to a specific number of samples to be tested, the specified number is to beconsidered a minimum quantity.Note: Although the intended primary application of this standard is stated in its scope, it is important to note thatit remains the responsibility of the users of the standar