ANSI CSA AM NGV 4.8-2012 CSA 12.8-2002-2012 Standard for Natural gas vehicle fueling station reciprocating compressor guidelines (Second Edition).pdf

《ANSI CSA AM NGV 4.8-2012 CSA 12.8-2002-2012 Standard for Natural gas vehicle fueling station reciprocating compressor guidelines (Second Edition).pdf》由会员分享，可在线阅读，更多相关《ANSI CSA AM NGV 4.8-2012 CSA 12.8-2002-2012 Standard for Natural gas vehicle fueling station reciprocating compressor guidelines (Second Edition).pdf（64页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI NGV 4.8-2012CSA 12.8-2002Standard forNatural gas vehicle fuelingstation reciprocating compressorguidelinesLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards through a consensusstandards development process approved by the

2、Standards Council of Canada. This process brings together volunteers representingvaried viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process andestablishes rules to promote fairness in achieving consensus, it does not independently test, ev

3、aluate, or verify the content ofstandards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness for a part

4、icular purpose or use, its merchantability, orits non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, orcurrency of any of the information published in this document. CSA Group makes no representations or warranties regarding this

5、documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OREXPENSES, H

6、OWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE,BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED INCONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FRO

7、MACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCHDAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or onbehalf of any pers

8、on or entity or to perform any duty owed by any person or entity to another person or entity. The information inthis document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Groupaccepts no responsibility whatsoever arising in any way from an

9、y and all use of or reliance on the information contained in thisdocument. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power,nor does it undertake, to enforce compliance with the contents of the standards or other documents

10、 it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or theauthorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as oth

11、erwise noted to thecontrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and tradesecrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, ordisclosure of this docu

12、ment may violate laws that protect CSA Groups and/or others intellectual property and may give rise to aright in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted bylicence or by law, CSA Group reserves all intellectual property

13、 rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shallnot be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determin

14、ation ofthe validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document isauthorized to do only the following:If this document is in electr

15、onic form:load this document onto a computer for the sole purpose of reviewing it;search and browse this document; andprint this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to havesuch copi

16、es, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others toalter this document in any way or remove this Legal Notice from the attached standard;sell this document without authorization from CSA Group; ormake an electronic copy of this document

17、.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of thisdocument constitutes your acceptance of t

18、he terms and conditions of this Legal Notice.Standard DevelopersAPPROVEDCSA AMERICA INC.Operating as “CSA Group”8501 East Pleasant Valley RoadCleveland, Ohio 44131CANADIAN STANDARDS ASSOCIATIONOperating as “CSA Group”5060 Spectrum Way, Suite 100Mississauga, Ontario, Canada L4W 5N6TMA trade-mark of t

19、he Canadian Standards Association, operating as “CSA Group”Published in May 2012 by CSA GroupVisit our Online Store at shop.csa.caAMERICAN NATIONAL STANDARDANSI NGV 4.8-2012CSA 12.8-2002Second Edition - 2012This Standard is based on the Standard forNatural gas vehicle fueling station reciprocating c

20、ompressor guidelinesANSI NGV 4.8-2002 CSA 12.8-2002No changes from the 2002 edition were made to this document.March 20, 2012American National Standards Institute, Inc.November 23, 2000Interprovincial Gas Advisory Council IGACThe Canadian Standards Association (operating as “CSA Group”), under whose

21、 auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities.C

22、SA Group standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal gover

23、nments in their regulations, particularly in the fields of health, safety, building and construction, and the environment.Individuals, companies, and associations across Canada indicate their support for CSA Groups standards development by volunteering their time and skills to Committee work and sup

24、porting CSA Groups objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSA Groups total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSA Groups standards

25、development activities.CSA Group offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, CSA Group regularly and continually audits and inspects products that bear the CSA Group Mark.In

26、 addition to its head office and laboratory complex in Toronto, CSA Group has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, CSA Group has developed the necessary expertise to meet its corporate mission: CSA Group is an inde

27、pendent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.LAssociation canadienne de normalisation (qui

28、exerce ses activits sous le nom Groupe CSA), sous les auspices de laquelle cette Norme nationale a t prpare, a reu ses lettres patentes en 1919 et son accrditation au sein du Systme de Normes nationales par le Conseil canadien des normes en 1973. Association daffiliation libre, sans but lucratif ni

29、pouvoir de rglementation, le Groupe CSA se consacre llaboration de normes et la certification.Les normes du Groupe CSA refltent le consensus de producteurs et dusagers de partout au pays, au nombre desquels se trouvent des fabricants, des consommateurs, des dtaillants et des reprsentants de syndicat

30、s, de corps professionnels et dagences gouvernementales. Lutilisation des normes du Groupe CSA est trs rpandue dans lindustrie et le commerce, et leur adoption divers ordres de lgislation, tant municipal et provincial que fdral, est chose courante, particulirement dans les domaines de la sant, de la

31、 scurit, du btiment, de la construction et de lenvironnement.Les Canadiens dun bout lautre du pays tmoignent de leur appui au travail de normalisation men par le Groupe CSA en participant bnvolement aux travaux des comits du Groupe CSA et en appuyant ses objectifs par leurs cotisations de membres de

32、 soutien. Les quelque 7000 volontaires faisant partie des comits et les 2000 membres de soutien constituent lensemble des membres du Groupe CSA parmi lesquels ses administrateurs sont choisis. Les cotisations des membres de soutien reprsentent une source importante de revenu pour les services de sou

33、tien la normalisation volontaire.Le Groupe CSA offre des services de certification et de mise lessai qui appuient et compltent ses activits dans le domaine de llaboration de normes. De manire assurer lintgrit de son processus de certification, le Groupe CSA procde de faon rgulire et continue lexamen

34、 et linspection des produits portant la marque du Groupe CSA.Outre son sige social et ses laboratoires Toronto, le Groupe CSA possde des bureaux rgionaux dans des centres vitaux partout au Canada, de mme que des agences dinspection et dessai dans huit pays. Depuis 1919, le Groupe CSA a parfait les c

35、onnaissances techniques qui lui permettent de remplir sa mission dentreprise, savoir le Groupe CSA est un organisme de services indpendant dont la mission est doffrir une tribune libre et efficace pour la ralisation dactivits facilitant lchange de biens et de services par lintermdiaire de services d

36、e normalisation, de certification et autres, pour rpondre aux besoins de nos clients, tant lchelle nationale quinternationale.CSA GroupFor further information on CSA Group services, write toCSA Group5060 Spectrum Way, Suite 100, Mississauga, Ontario,Canada L4W 5N6Pour plus de renseignements sur les

37、services dedu Groupe CSA, sadresser auGroupe CSA5060, Spectrum Way, bureau 100Mississauga, Ontario, Canada L4W 5N6American National Standards InstituteResponsibility of approving American National Standards rests with theAmerican National Standards Institute, Inc.25 West 43rd Street, Fourth FloorNew

38、 York, NY10036The American National Standards Institute (ANSI), Inc. is the nationally recognized coordinator of voluntary standards development in the United States through which voluntary organizations, representing virtually every technical discipline and every facet of trade and commerce, organi

39、zed labor and consumer interests, establish and improve the some 10,000 national consensus standards currently approved as American National Standards.ANSI provides that the interests of the public may have appropriate participation and representation in standardization activity, and cooperates with

40、 departments and agencies of U.S. Federal, state and local governments in achieving compatibility between government codes and standards and the voluntary standards of industry and commerce.ANSI represents the interests of the United States in international nontreaty organizations such as the Intern

41、ational Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). The Institute maintains close ties with regional organizations such as the Pacific Area Standards Congress (PASC) and the Pan American Standards Commission (COPANT). As such, ANSI coordinates the

42、activities involved in the U.S. participation in these groups.ANSI approval of standards is intended to verify that the principles of openness and due process have been followed in the approval procedure and that a consensus of those directly and materially affected by the standards has been achieve

43、d. ANSI coordination is intended to assist the voluntary system to ensure that national standards needs are identified and met with a set of standards that are without conflict or unnecessary duplication in their requirements.PrefaceThe ultimate purpose for this document is that it constitute the pe

44、rformance standard for North America regarding fueling station reciprocating compressors applicable to dispensing natural gas to vehicles. Major funding in support of the consensus process for this Standard was provided by the Natural Gas Vehicle Coalition (NGVC), whose assistance is acknowledged wi

45、th thanks.This document is designated as being Guidelines because it presents the industrys minimum requirements for its “best practices”. It is also designated as being a Standard because of the consensus process by which it has been developed and approved. In the former instance the document has b

46、een labelled according to the type of information it contains and in the latter instance according to the levels of input, evaluation and acceptance of this information. Portions of ANSI/NGV 4.8 CSA 12.8 are taken from API 11P, Specification for Packaged Reciprocating Compressors for Oil and Gas Pro

47、duction Services, Second Edition, November, 1989 and reproduced with permission of the American Petroleum Institute (API), 1220 L Street, Northwest, Washington, D.C. 20005.This proposed standard requires the purchaser to specify certain details. A bullet ( ) in the margin indicates that information

48、and/or a decision by the purchaser is required.This publication represents a standard for safe operation, substantial and durable construction and performance testing of compressor packages containing reciprocating compressors for natural gas dispensing systems, within limitations given below and in

49、 the scope of this standard.This standard is based on proven engineering principles, research and the combined expertise of gas utilities, manufacturers, users, and others having specialized experience.Nothing in this standard is to be considered in any way as indicating a measure of quality beyond compliance with the provisions it contains. It is designed to allow compliance of products which may exceed that specified in the provisions herein. In its preparation, full recognit