ANSI CSA AM NGV 2-2016 Compressed natural gas vehicle fuel containers (Fifth Edition).pdf

《ANSI CSA AM NGV 2-2016 Compressed natural gas vehicle fuel containers (Fifth Edition).pdf》由会员分享，可在线阅读，更多相关《ANSI CSA AM NGV 2-2016 Compressed natural gas vehicle fuel containers (Fifth Edition).pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、CSA/ANSI NGV 2-2016Compressed natural gas vehicle fuel containersLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards thro ugh a consensus standards development pro cess approved by the Standards Council of Canada and the America

2、n National Standards Institut e. This process brings together volunteer s representing varied viewpoints and interes ts to achieve consensus and develop a standard. Although CSA Group administ ers the process and est ablishes rules to pro mote fairness in achieving consensus, it does not independent

3、ly tes t, evaluat e, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is pro vided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document s f

4、itness for a particular purpose or use, its merchantability , or its non-infringement of any third party s intellectual pro perty rights. CSA Group does not warrant the accuracy , complet eness, or currency of any of the information published in this document. CSA Group makes no representations or w

5、arranties regarding this document s compliance with any applicable statut e, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY,

6、 LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, A

7、RISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render pro fessional or other ser

8、vices for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity . The information in this document is directed to those who have the appropriat e degree of experience to use and apply its conten ts, and CSA Group accepts no responsibilit

9、y whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not -for -profit company that publishes voluntary standards and related documents. CSA Group has no power , nor does it undertake, to enforce compliance with the c

10、ontents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in print ed or electronic form), CSA Group is the owner , or the authorized licensee, of all works contained herein that are pro tect

11、ed by copyright, all trade-marks (except as otherwise not ed to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are prot ected by patents and applications for patents. Without limitation, the unauthorized us

12、e, modification, copying, or disclosure of this document may violate laws that pro tect CSA Groups and/or other s int ellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitt ed by licen

13、ce or by law , CSA Group reserves all int ellectual property rights in this document.Patent rightsAtt ention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent righ

14、ts. Users of this st andard are expressly advised that determ ination of the validity of any such patent rights is entirely their own responsibility .Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only . The user of this document

15、is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and bro wse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distr

16、ibut ed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appear s on each such copy .In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document wit

17、hout authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to

18、 destr oy them immediately . Use of this document constitut es your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceCSA/ANSI NGV 2-2016December 2016Title: Compressed natural gas vehicle fuel containersTo regist er for e-mail notification about any updat es to this

19、 publication go to shop.csa.ca click on CSA Updat e ServiceThe List ID that you will need to regist er for updat es to this publication is 2423978.If you require assista nce, please e-mail t echsupportcsagr oup.org or call 416-747-2233.Visit CSA Gr oups policy on privacy at www .csagr oup.org/legal

20、to find out how we prot ect your per sonal information.ISBN 978-1-4883-0099-8 2016 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher .Published in December 2016 by CSA Group A not -for-prof it privat e se

21、ct or organization 178 Re xdale Boulevard, Toront o, Ontario, Canada M9W 1R3 To purchase st andards and related publications, visit our Online Store at shop.csa.caor call to ll-free 1-800-463-6727 or 416-747-4044.A trademark of the Canadian Standards Association and CSA America Inc., operating as “C

22、SA Group”American National Standards Institute, Inc.Approved on November 7, 2016 by ANSICompressed natural gas vehicle fuel containersCSA/ANSI NGV 2-2016CSA/ANSI NGV 2-2016 Compressed natural gas vehicle fuel containersDecember 2016 2016 CSA Group 1ContentsJoint Automotive Technical Committ ee 5NGV

23、2/HGV 2 Technical Subcommit tee on Standards for Compressed Natural Gas and Compressed Hydrogen Vehicle Fuel Container s 7Preface 111 Scope 131.1 General 131.2 Container type 131.3 Alt ernative construc tion or mater ials 131.4 Units of measure 131.5 Terminology 132 Reference publications 143 Defini

24、tions 164 Service conditions 184.1 General 184.1.1 Standard service conditions 184.1.2 Ins tallation requirements 184.1.3 Service life 184.1.4 Periodic in-service inspections 184.1.5 Conditions requiring immediate inspections 194.1.6 Overpressurization 194.2 Pressures 194.2.1 Service pressure 194.2.

25、2 Maximum pressures 194.3 Maximum number of filling cycles 194.4 Temperature range 194.4.1 Set tled gas tem peratures 194.4.2 Container tempe ratures 194.4.3 Transient tem peratures 204.4.4 Tes t t emperatures 204.5 Gas composition 204.6 Ext ernal surfaces 204.7 Gas permeation 204.8 Ins tallation re

26、quirements 205 Compliance 215.1 General 215.2 Retr oactivity 216 Mat erial qualification t ests and requirements 216.1 General 216.2 Metal container s and metal liner s 21CSA/ANSI NGV 2-2016 Compressed natural gas vehicle fuel containersDecember 2016 2016 CSA Group 26.2.1 Mat erial proper ties 216.2

27、.2 Impact t est for s tee l 226.2.3 Sulfide s tress cracking resis tance for s tee ls 226.2.4 Tensile tes ts for metals 226.2.5 Sus tained load cracking (SLC) tes t for aluminum 226.2.6 Corr osion tes ts for aluminum 236.3 Ext ernal coatings 236.3.1 Ultraviolet resis tance 236.3.2 Mois ture resis ta

28、nce 236.4 Fiber s 236.5 Resins 236.6 Nonmetallic liners (Type 4) 236.7 Bosses for Type 4 container s 247 Wall thickness 247.1 Type 1 container s 247.2 Liner s for Type 2, Type 3, and Type 4 container s 247.3 Composit e reinforcement for Type 2, Type 3, and Type 4 container s 247.3.1 Stress analysis

29、247.3.2 Stress ratios 247.3.3 Modified st ress ratio tes t 247.3.4 Hybrid designs 257.4 Ext ernal loads on container s 258 Threaded openings 259 Inspection requirements 259.1 Inspection during qualification 259.2 Inspection during manufacturing 259.2.1 Duties of inspector during manufacturing 269.3

30、Inspection during use 2710 Manufacture 2710.1 General 2710.2 Metal container s and metal liner s 2710.3 Nonmetallic liners 2710.4 Composit e container s with metallic liners 2810.5 Composit e container s with nonmetallic liners 2810.6 Brazing 2810.7 Welding 2810.8 End closing by forming 2810.9 Mount

31、ing and prot ection 2810.10 Bat ch definitions 2910.11 Design qualification t ests 3011 Pr oduction t ests and examinations 3011.1 General 3011.2 Hydr ostatic tes t 3111.3 Leak t est 31CSA/ANSI NGV 2-2016 Compressed natural gas vehicle fuel containersDecember 2016 2016 CSA Group 312 Batch t es ts 32

32、12.1 General 3212.2 Bat ch mat erial t ests 3212.3 Coat ed container s 3212.4 Bur s t tes t 3212.4.1 Bat ch bur st t est 3212.4.2 Periodic burs t tes t (applicable to NGV 2-Type 1 container s only) 3312.5 Cycle t est 3312.5.1 Bat ch cycle tes t 3312.5.2 Periodic pressure cycling t est 3313 Rejecte d

33、 container s and liner s 3413.1 Physical tes t 3413.2 Leak t est 3413.3 Hydr ostatic tes t 3413.4 Cycle t est 3413.5 Bur s t tes t 3414 Pressure relief devices 3415 Records of manufacture 3516 Manufacturer s ins tructions 3517 Marking and dispatc h 3517.1 Markings 3517.1.1 Marking information 3517.2

34、 Dispat ch 3618 Quality assurance 3618.1 General 3618.2 Independent inspection (option 2) 3619 Design qualification t es ts 3719.1 General 3719.2 Tes t requirements 3719.3 Ambient cycling tes t 4019.4 Envir onmental tes t 4019.4.1 Container set -up and preparation 4019.4.2 Pendulum impact preconditi

35、oning 4119.4.3 Envir onmental fluids for exposure 4119.4.4 Pressure cycle and pressure hold 4119.4.5 Acceptable result 4219.5 Extreme tem perature cycling 4219.6 Hydr ostatic burs t t est 4219.7 Composit e flaw tolerance tes t 4219.8 Dr op t est 4219.9 Bonfire tes t 4319.9.1 General 4319.9.2 Contain

36、er set -up 43CSA/ANSI NGV 2-2016 Compressed natural gas vehicle fuel containersDecember 2016 2016 CSA Group 419.9.3 Container s 1.65 m (65 in) length or less 4319.9.4 Container s greate r than 1.65 m (65 in) length 4419.9.5 Fire source 4419.9.6 Temperature and pressure measurements 4419.9.7 General

37、tes t requirements 4419.9.8 Acceptable results 4419.10 Accelerat ed stress rupture tes t 4519.11 Penetration tes t 4519.12 Permeation tes t 4519.13 Natural gas cycling tes t 4519.14 Leak before break (bur st) t est 4519.15 Non-des tructive examination (NDE) defect size deter mination 4519.15.1 NDE d

38、efect size by engineering critical assessment 4619.15.2 NDE defect size by flawed container cycling 4619.16 Corr osion resis tance 4719.16.1 Accelerat ed cyclic corro sion 4719.16.2 Pr ocedure 4819.16.3 Ins tructions 4819.17 Qualification tes t results 49Annex A (informative) Disassembly under press

39、ure 51Annex B (informative) Records of manufacturer 52Annex C (informative) Table of conver sion factor s 58Annex D (informative) SI (Metric) Symbols 61CSA/ANSI NGV 2-2016 Compressed natural gas vehicle fuel containersDecember 2016 2016 CSA Group5Joint Automotive Technical CommitteeJ.F. Jordan Agili

40、ty Fuel Syst ems, Cook, Minnesota, USA Cat egory: User Interes tVice-ChairJ. Birdsall Toyota Motor Engineering suggestio ns for its improvement will be referred to the appropriate committ ee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include

41、“Proposal for change” in the subject line: a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.6) To submit a request for interpretation of this Standard, please send the following information to inquiries

42、csagroup.org and include “Request for interp retation” in the subject line: a) define the problem, making reference to the specific clause, and, where appropriate, include an illustra tive sketch;b) provide an ex planation of circums tances surrounding the actual field condition; andc) where possibl

43、e, phrase the reques t in such a way that a specific “yes” or “no” answer will address the issue. Committ ee interp retations are processed in accordance with the CSA Directives and guidelines governing st andardization and are available on the Current Standards Activities page at standardsactivitie

44、s.csa. ca .CSA/ANSI NGV 2-2016 Compressed natural gas vehicle fuel containersDecember 2016 2016 CSA Group 12History of Development of CSA/ANSI NGV 2Not e: This his to ry is informative and is not part of the s tandard.In 1988, a gr oup of U.S. gas utility companies formed the Natural Gas Vehicle (NG

45、V) Coalition (the Coalition) to prom ote widespread use of natural gas as a vehicle fuel. The Coalition organized committ ees to address technical, marketing and legislative issues which would affect future expansion. The Coalition recognized that an important consideration in the successful commerc

46、ialization of natural gas as a vehicle fuel was the issue of codes and stand ards (or the lack of codes and stand ards, or harmonized codes and s tandards) pertaining to both fuel st ations and vehicle fuel sy st ems. The Coalitions Technology Committ ee undertook the goal of es tablishing a program

47、 for the development of an organized family of coordinat ed codes, st andards and regulations addressing natural gas vehicles and fueling stati ons.One of the major tech nical obs tacles to the above goal concerned the on-board fuel container . It was acknowledged that lack of a design s tandard and

48、 certification progr am for light -weight composite vehicle fuel supply container s was a major obstacle to wider use of compressed natural gas as a vehicle fuel. U.S. Department of Transportation (DOT) regulations and exemptions do not address the use of cylinders as vehicle fuel container s. Such

49、government regulations only cover cylinders which are appr oved for use in inter stat e transport.The Standards and Standardization Subcommitt ees On-Board Fuel Containers Working Gr oup esta blished a task gr oup to prepare a draft stand ard addressing NGV on-board fuel container s.The Fuel Cylinder Task Group initiated a prop osed draft standard for NGV on-board fuel container s, which was (1) based on exis ting standar ds, (2) had no limitation on materia ls or method of construct ion, (3) considered the int ernal and ext ernal container environmen