ANSI CSA AM CSA CHMC 1-2014 Test methods for evaluating material compatibility in compressed hydrogen applications - Metals (First Edition).pdf

《ANSI CSA AM CSA CHMC 1-2014 Test methods for evaluating material compatibility in compressed hydrogen applications - Metals (First Edition).pdf》由会员分享，可在线阅读，更多相关《ANSI CSA AM CSA CHMC 1-2014 Test methods for evaluating material compatibility in compressed hydrogen applications - Metals (First Edition).pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI/CSA CHMC 1-2014Test methods for evaluating material compatibility in compressed hydrogen applications - MetalsLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards through a consensus standards development process approved by

2、 the Standards Council of Canada and the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in ac

3、hieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or

4、conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Gr

5、oup makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT,

6、 OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR A

7、NY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to re

8、nder professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Gro

9、up accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enfor

10、ce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained her

11、ein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, t

12、he unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent perm

13、itted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such

14、patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this do

15、cument is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be

16、 distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document

17、without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required

18、 to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceANSI/CSA CHMC 1-2014January 2014Title: Test methods for evaluating material compatibility in compressed hydrogen applications - MetalsTo register fo

19、r e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2422807.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy

20、 on privacy at csagroup.org/legalto find out how we protect your personal information.ISBN 9781771394284 2014 CSA GroupAll rights reserved. No part of this publication may be reproduced to any form whatsoever without the prior permission of the publisher.Published in January 2014 by CSA Group A not-

21、for-profit private sector organization 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association and C

22、SA America Inc., operating as “CSA Group”American National Standards Institute, Inc.Approved on January 07, 2014 by ANSITest methods for evaluating material compatibility in compressed hydrogen applications - MetalsANSI/CSA CHMC 1-2014ANSI/CSA CHMC 1-2014Test methods for evaluating material compatib

23、ility in compressed hydrogen applications - MetalsJanuary 2014 2014 CSA Group1ContentsJoint Automotive Technical Committee 3Technical Committee on Test Method for Evaluating Material Compatibility for Compressed Hydrogen Applications 5Preface 60 Introduction 81 Scope 82 Reference publications 93 Def

24、initions 94 General requirements 104.1 Hydrogen gas purity 104.1.1 Significance 104.1.2 Source gas 104.1.3 Purging 114.1.4 Test gas purity and sampling 124.2 Measurement and instrumentation 124.2.1 Internal transducers 134.2.2 External transducers 134.3 Test temperature 134.3.1 Temperature selection

25、 134.3.2 Test Temperatures for select alloy classes 144.3.3 Experimental determination of temperature of maximum hydrogen embrittlement 144.4 H2test pressure 154.4.1 Test pressure selection 155 Test methods 165.1 Apparatus 165.2 Applicability of results 165.3 Specimen orientation 165.4 Slow strain r

26、ate tensile testing 165.4.1 Apparatus 165.4.2 Test environment 165.4.3 Test procedure 175.4.4 Reporting 175.5 Hydrogen assisted cracking threshold stress intensity factor, KIH, or JIH175.5.1 Apparatus 175.5.2 Test environment 185.5.3 Specimen preparation 185.5.4 Test procedures 185.5.5 Reporting 185

27、.6 Fatigue Crack Growth Rate (FCGR) 18ANSI/CSA CHMC 1-2014Test methods for evaluating material compatibility in compressed hydrogen applications - MetalsJanuary 2014 2014 CSA Group25.6.1 Apparatus 195.6.2 Test environment 195.6.3 Specimen preparation 195.6.4 Procedure 195.6.5 Reporting 205.7 Fatigue

28、 life tests 205.7.1 Apparatus 205.7.2 Test environment 205.7.3 Specimen preparation 205.7.4 Test procedures 205.7.5 Reporting 216 Material qualification 226.1 Overview of qualification process 226.1.1 Qualification procedures 226.1.2 Applicability of test results 226.2 Screening test 246.2.1 Slow st

29、rain rate tensile tests 246.2.2 Compatibility criteria for aluminum and austenitic stainless steel 246.2.3 Compatibility criteria for all alloys 246.3 Determination of safety factor multiplier 256.3.1 Notched tensile fatigue testing 256.3.2 Statistical analysis of fatigue results 256.4 Design qualif

30、ication by testing 266.4.1 Design rules 266.4.2 Requirements for stress - or strain - based fatigue testing 276.4.3 Requirements for fracture mechanics based fatigue testing 276.5 Qualification of materials specification 296.5.1 Requirements for qualification of a materials specification 29Annex A (

31、informative) Additional information on hydrogen gas purity requirements 31Annex B (informative) Additional considerations regarding transducers exposed to gaseous hydrogen 32Annex C (informative) Recommendations if using external displacement measurement 33Annex D (informative) Test temperature 34An

32、nex E (informative) Recommendations on testing hydrogen-precharged specimens 35Annex F (normative) Statistical analysis of fatigue data 38Annex G (informative) Recommended procedures for qualification of welds 40Annex H (informative) Bibliography 41ANSI/CSA CHMC 1-2014Test methods for evaluating mat

33、erial compatibility in compressed hydrogen applications - MetalsJanuary 2014 2014 CSA Group3Joint Automotive Technical CommitteeL. Gambone Powertech Labs Inc, Surrey, British Columbia, CanadaCategory: User InterestChairJ. Birdsall Toyota Motor Engineering c) wording of the proposed change; andd) rat

34、ionale for the change.6) To submit a request for interpretation of this Standard, please send the following information to inquiriescsagroup.organd include “Request for interpretation” in the subject line:a) define the problem, making reference to the specific clause, and, where appropriate, include

35、 an illustrative sketch;b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives

36、and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.ANSI/CSA CHMC 1-2014Test methods for evaluating material compatibility in compressed hydrogen applications - MetalsJanuary 2014 2014 CSA Group 7History of the development

37、 of ANSI/CSA CHMC 1Note: This history is informative and is not part of the standard.In September 2002, CSA met with the U.S. Department of Energy, Renewable Fuels Group in Washington, D.C. to discuss standards development opportunities in the hydrogen technology area. During this meeting, DOE reque

38、sted that CSA provide a proposal relating to the development of hydrogen technology standards and codes in the United States.Industry recognized that an important consideration in the successful commercialization of hydrogen gas as a vehicle fuel was the issue of codes and standards, pertaining to b

39、oth fueling stations and vehicle fuel system components. CSA undertook the goal of establishing a program for the development of an organized family of coordinated standards that addresses hydrogen gas vehicles and fueling stations.Industry and CSA recognized there was no comprehensive standard that

40、 provided methods for evaluating suitability of materials for use in hydrogen environments.The development of such a standard was necessary based on industry needs and feedback:a) There were no comprehensive standard available for material suitability in hydrogen applications.b) Automotive OEMs driv

41、ing the application of hydrogen as a fuel for vehicles expressed concern over solutions in demonstration projects in the field.The focus of the Test Method for Evaluating Material Compatibility in Compressed Hydrogen Applications standard established uniform test methods for evaluating material comp

42、atibility with compressed hydrogen applications. The results of these tests are intended to provide a basic comparison of materials performance in applications utilizing compressed hydrogen. This standard is not intended to replace the targeted testing which may be necessary to qualify the design of

43、 a component manufactured for use in hydrogen applications.This standard applies to metallic materials only.CSA has positioned itself as a leader in the fuel cell, hydrogen and natural gas sectors as a Standards Developing Organization (SDO). CSA is aggressively updating and developing national stan

44、dards, and is playing a major role in the promulgation of US technologies nationally. As US TAG Administrator to IEC TC 105 for Fuel Cell Technologies and as US TAG members of ISO TC 197 and ISO TC 22 / SC 25, CSA is facilitating US technology internationally. CSA organized committees to address tec

45、hnical issues in the development of standards which would affect future expansion of the hydrogen industry.The ANSI/CSA CHMC 1 Test Method for Evaluating Material Compatibility in Compressed Hydrogen Applications standard was processed as an American National Standard in accordance with procedures o

46、f the American National Standards Institute (ANSI).This is the first edition of the ANSI/CHMC 1 Test Methods for Evaluating Material Compatibility in Compressed Hydrogen Applications - Metals, was approved by CSA Technical Committee on Automotive Alternative Energy on October 28, 2013, and the Ameri

47、can National Standards Institute, Inc. on January 07, 2014.Previous editions of this standard are as follows: CSA CHMC-1-2012ANSI/CSA CHMC 1-2014Test methods for evaluating material compatibility in compressed hydrogen applications - MetalsJanuary 2014 2014 CSA Group8ANSI/CSA CHMC 1-2014Test methods

48、 for evaluating material compatibility in compressed hydrogen applications - Metals0 IntroductionPressurized hydrogen gas environments may alter the mechanical properties of virtually all common structural metal alloys. The manifestations of the effects of hydrogen environment on mechanical properti

49、es are qualitatively similar for all relevant structural metals and alloys hydrogen reduces the resistance to crack initiation and crack growth, and reduces ductility. Quantitatively, the magnitude of this reduction is strongly dependent on a large number of variables related to the material, the environment and the mechanical loading conditions.The test methods described in this standard are intended to provide an assessment of the influence of gaseous hydrogen on a given metallic alloys tensile ductility and resistance to sub-critical crack