ANSI AWS B5.2-2018 Specification for the Training Qualification and Company Certification of Welding Inspector Specialists and Welding Inspector Assistants (2nd Edition).pdf
《ANSI AWS B5.2-2018 Specification for the Training Qualification and Company Certification of Welding Inspector Specialists and Welding Inspector Assistants (2nd Edition).pdf》由会员分享,可在线阅读,更多相关《ANSI AWS B5.2-2018 Specification for the Training Qualification and Company Certification of Welding Inspector Specialists and Welding Inspector Assistants (2nd Edition).pdf(30页珍藏版)》请在麦多课文档分享上搜索。
1、AWS B5.2:2018An American National StandardSpecification for the Training, Qualification, and Company Certification of Welding Inspector Specialists and Welding Inspector AssistantsAWS B5.2:2018An American National StandardApproved by the American National Standards Institute May 11, 2017Specificatio
2、n for the Training, Qualification, and Company Certification of Welding Inspector Specialists and Welding Inspector Assistants2nd EditionSupersedes AWS B5.2:2001Prepared by the AWS Personnel Internet: .iiiAWS B5.2:2018Statement on the Use of American Welding Society StandardsAll standards (codes, sp
3、ecifications, recommended practices, methods, classifications, and guides) of the American Welding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of the American National Standards Institute (ANSI). When AWS American National Standards are eithe
4、r incorporated in, or made part of, documents that are included in federal or state laws and regulations, or the regulations of other governmental bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWS standards must be approved by the governm
5、ental body having statutory jurisdiction before they can become a part of those laws and regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes the AWS standards. Where this contractual relationship exists, changes in or deviations fr
6、om requirements of an AWS standard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that brings together volunteers representing varied viewpoints and interests to achieve consensus. While AWS adminis
7、ters the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to propert
8、y, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance on this standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any information publishe
9、d herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for or on behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someone else. Anyone using these documents should rely on h
10、is or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. It is assumed that the use of this standard and its provisions is entrusted to appropriately qualified and competent personnel
11、.This standard may be superseded by new editions. This standard may also be corrected through publication of amendments or errata, or supplemented by publication of addenda. Information on the latest editions of AWS standards including amendments, errata, and addenda is posted on the AWS web page (w
12、ww.aws.org). Users should ensure that they have the latest edition, amendments, errata, and addenda.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard accept any and all liabilities for infringement of any patent or trade name items. AWS
13、disclaims liability for the infringement of any patent or product trade name resulting from the use of this standard.AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.Official interpretations of any of the technical requirements of this stand
14、ard may only be obtained by sending a request, in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society, Attention: Managing Director, Certification Department, (see Annex D). With regard to technical inquiries made concerning AWS standard
15、s, oral opinions on AWS standards may be rendered. These opinions are offered solely as a convenience to users of this standard, and they do not constitute professional advice. Such opinions represent only the personal opinions of the particular individuals giving them. These individuals do not spea
16、k on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision at any time by the AWS Qualification
17、 and Certification Committee. It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, or deletions) and any pertinent data that may be of use in improving this standard are requested and should be addressed to AWS Hea
18、dquarters. Such comments will receive careful consideration by the AWS Qualification and Certification Committee and the author of the comments will be informed of the Committees response to the comments. Guests are invited to attend all meetings of the AWS QCIS Subcommittee on Welding Inspector Spe
19、cialists to express their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are provided in the Rules of Operation of the Qualification and Certification Committee. A copy of these Rules can be obtained from the American Welding Society, 8669 NW 36 St, # 13
20、0, Miami, FL 33166.ivAWS B5.2:2018This page is intentionally blank.vAWS B5.2:2018PersonnelPersonnel and Facilities Qualification CommitteeP. A. Grimm, Chair Modern Welding CompanyR. E. Dines, Vice Chair United Technical Inc. S. P. Hedrick, Secretary American Welding SocietyI. A. Cross Valiant TMSF.
21、J. Fascenda ConsultantK. M. Gilgenbach AirgasR. L. Holdren ARC Specialties/Welding Consultants, LLCV. Kuruvilla Lexicon/Genesis Quality SystemsD. Logan Alloy EngineeringB. W. Phillips ConsultantJ. R. Reid Reid ConsultingD. L. Twitty Dona Ana Community College of New Mexico State UniversityAWS B5B Su
22、bcommittee on Welding Inspector SpecialistsJ. R. Reid Reid Consulting S. P. Hedrick, Secretary American Welding SocietyK. W. Coryell ConsultantP. A. Grimm Modern Welding CompanyviAWS B5.2:2018This page is intentionally blank.viiAWS B5.2:2018ForewordThis foreword is not part of this standard but is i
23、ncluded for informational purposes only.This is the second edition of AWS B5.2. The first edition was published in 2001. Revisions in this edition were made to Clauses 1 (Scope), 7 (Written Practice), 8 (Physical Requirements), 9 (Training), 10 (Examination Requirements), and 11 (Certification). The
24、 title of the standard has been revised to better reflect its scope. The changes are widespread enough that clear markup of the changes is difficult. The first edition of AWS B5.2 superseded QC2-93, Recommended Practice for the Training, Qualification, and Certification, of Welding Inspector Special
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ANSIAWSB522018SPECIFICATIONFORTHETRAININGQUALIFICATIONANDCOMPANYCERTIFICATIONOFWELDINGINSPECTORSPECIALISTSANDWELDINGINSPECTORASSISTANTS2NDEDITIONPDF
链接地址:http://www.mydoc123.com/p-433804.html