ANSI AWS A5.26 A5.26M-1997 Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding.pdf

《ANSI AWS A5.26 A5.26M-1997 Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding.pdf》由会员分享，可在线阅读，更多相关《ANSI AWS A5.26 A5.26M-1997 Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、Specification forCarbon andLow-Alloy SteelElectrodes forElectrogasWeldingANSI/AWS A5.26/A5.26M-97 (R2009)An American National Standard550 N.W. LeJeune Road, Miami, FL 33126ANSI/AWS A5.26/A5.26M-97 (R2009)An American National StandardApproved by theAmerican National Standards InstituteSeptember 25, 1

2、997Specification forCarbon and Low-Alloy SteelElectrodes for Electrogas WeldingSupersedes ANSI/AWS A5.26-91Prepared by theAmerican Welding Society (AWS) A5 Committee on Filler MetalsUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractClassificatio

3、n requirements are specified for solid and composite (flux cored and metal cored) electrodes for electro-gas welding. The requirements include chemical composition of the electrode for solid electrodes and of weld metal forcomposite (cored) electrodes, in addition to the mechanical properties and so

4、undness of weld metal taken from a grooveweld made with these electrodes using the prescribed welding procedure. Standard electrode sizes, marking, and packag-ing requirements are included.This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since the

5、se arenot equivalent, each system must be used independently of the other.Key WordsFiller metal specifications, low-alloy steel electrodes, carbon steel electrodes, welding electrodes, flux cored electrodes, electrogas welding electrodesiiANSI/AWS A5.26/A5.26M-97 (R2009)International Standard Book N

6、umber: 0-87171-532-5American Welding Society550 N.W. LeJeune Road, Miami, FL 33126 1998 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaReaffirmed: November 20, 2008Photocopy Rights. No portion of this standard may be reproduced, stored in a retrieval system, or

7、transmitted in anyform, including mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyrightowner.Authorization to photocopy items for internal, personal, or educational classroom use only or the internal, personal, oreducational classroom use only of sp

8、ecific clients is granted by the American Welding Society provided that the appropriatefee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel: (978) 750-8400; Internet:.iiiANSI/AWS A5.26/A5.26M-97 (R2009)Statement on the Use of American Welding Society StandardsAll

9、 standards (codes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of theAmerican National Standards Institute (ANSI). When AWS American National

10、Standards are either incorporated in, ormade part of, documents that are included in federal or state laws and regulations, or the regulations of other govern-mental bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWSstandards must be appro

11、ved by the governmental body having statutory jurisdiction before they can become a part ofthose laws and regulations. In all cases, these standards carry the full legal authority of the contract or other documentthat invokes the AWS standards. Where this contractual relationship exists, changes in

12、or deviations from requirementsof an AWS standard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that bringstogether volunteers representing varied viewpoints and interests to achieve consensus. Whi

13、le the AWS administers theprocess and establishes rules to promote fairness in the development of consensus, it does not independently test, evalu-ate, or verify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to per

14、sons or to property, or other damages of any nature whatsoever, whetherspecial, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or relianceon this standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any info

15、rmationpublished herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for oron behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someoneelse. Anyone using these documents sho

16、uld rely on his or her own independent judgment or, as appropriate, seek theadvice of a competent professional in determining the exercise of reasonable care in any given circumstances. It isassumed that the use of this standard and its provisions are entrusted to appropriately qualified and compete

17、nt personnel.This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard acceptany and all liabilities for infringement of any p

18、atent or trade name items. AWS disclaims liability for the infringement ofany patent or product trade name resulting from the use of this standard.Finally, the AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.On occasion, text, tables, or fi

19、gures are printed incorrectly, constituting errata. Such errata, when discovered, are postedon the AWS web page (www.aws.org).Official interpretations of any of the technical requirements of this standard may only be obtained by sending a request,in writing, to the appropriate technical committee. S

20、uch requests should be addressed to the American Welding Society,Attention: Managing Director, Technical Services Division, 550 N.W. LeJeune Road, Miami, FL 33126 (see Annex A).With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered.These opin

21、ions are offered solely as a convenience to users of this standard, and they do not constitute professionaladvice. Such opinions represent only the personal opinions of the particular individuals giving them. These individualsdo not speak on behalf of AWS, nor do these oral opinions constitute offic

22、ial or unofficial opinions or interpretations ofAWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision at any time by the AWS A5 Committee on Filler Metals. It must be reviewed everyfive years, and if no

23、t revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, ordeletions) and any pertinent data that may be of use in improving this standard are required and should be addressed toAWS Headquarters. Such comments will receive careful consideration by the AWS A5 Commit

24、tee on Filler Metals andthe author of the comments will be informed of the Committees response to the comments. Guests are invited to attendall meetings of the AWS A5 Committee on Filler Metals to express their comments verbally. Procedures for appeal ofan adverse decision concerning all such commen

25、ts are provided in the Rules of Operation of the Technical ActivitiesCommittee. A copy of these Rules can be obtained from the American Welding Society, 550 N.W. LeJeune Road,Miami, FL 33126.This page is intentionally blank.ivANSI/AWS A5.26/A5.26M-97 (R2009)vANSI/AWS A5.26/A5.26M-97 (R2009)Personnel

26、 (Reaffirmation)AWS A5 Committee on Filler Metals and Allied MaterialsJ. S. Lee, Chair ChevronH. D. Wehr, 1st Vice Chair Arcos Industries, LLCJ. J. DeLoach, Jr., 2nd Vice Chair Naval Surface Warfare CenterR. K. Gupta, Secretary American Welding SocietyT. Anderson ESAB Welding and Cutting ProductsJ.

27、M. Blackburn Naval Sea Systems CommandR. S. Brown RSB Alloy Applications, LLCJ. C. Bundy Hobart Brothers CompanyD. D. Crockett ConsultantD. A. DelSignore ConsultantJ. DeVito ESAB Welding and Cutting ProductsH. W. Ebert Consulting Welding EngineerD. M. Fedor The Lincoln Electric CompanyJ. G. Feldstei

28、n Foster Wheeler North AmericaS. E. Ferree ESAB Welding and Cutting ProductsD. A. Fink The Lincoln Electric CompanyG. L. Franke Naval Surface Warfare CenterR. D. Fuchs Bhler Welding Group USA, IncorporatedJ. A. Henning Nuclear Management CompanyR. M. Henson J. W. Harris Company, IncorporatedS. D. Ki

29、ser Special MetalsP. J. Konkol Concurrent Technologies CorporationD. J. Kotecki Damian Kotecki Welding ConsultantsL. G. Kvidahl Northrop Grumman ShipbuildingA. Y. Lau Canadian Welding BureauA. S. Laurenson Consultant W. A. Marttila Chrysler LLCT. Melfi The Lincoln Electric CompanyR. Menon Stoody Com

30、pany M. T. Merlo HyperTech Research, IncorporatedD. R. Miller ABS Americas Materials DepartmentB. Mosier Polymet CorporationA. K. Mukherjee Siemens Power Generation, IncorporatedC. L. Null ConsultantM. P. Parekh ConsultantR. L. Peaslee Wall Colmonoy CorporationK. C. Pruden Hydril CompanyS. D. Reynol

31、ds, Jr. ConsultantP. K. Salvesen Det Norske Veritas (DNV)K. Sampath ConsultantW. S. Severance ESAB Welding and Cutting ProductsM. J. Sullivan NASSCONational Steel and ShipbuildingR. C. Sutherlin ATI Wah Chang R. A. Swain Euroweld, LimitedK. P. Thornberry Care Medical, IncorporatedM. D. Tumuluru U.S.

32、 Steel CorporationviANSI/AWS A5.26/A5.26M-97 (R2009)Advisors to the AWS A5 Committee on Filler Metals and Allied MaterialsR. L. Bateman Soldaduras West Arco LimitadaR. A. Daemen ConsultantC. E. Fuerstenau Lucas-Milhaupt, IncorporatedJ. P. Hunt Special MetalsS. Imaoka Kobe Steel LimitedM. P. Parekh C

33、onsultantM. A. Quintana The Lincoln Electric CompanyE. R. Stevens Stevens Welding ConsultingE. S. Surian National University of Lomas de ZamoraAWS A5P Subcommittee on Carbon and Low-AlloySteel Electrodes for Electroslag and Electrogas WeldingJ. S. Lee, Chair ChevronR. K. Gupta, Secretary American We

34、lding SocietyJ. H. Devletian Portland State UniversityD. A. Fink The Lincoln Electric CompanyD. C. Phillips Hobart Brothers CompanyR. B. Turpin Portland State UniversityviiANSI/AWS A5.26/A5.26M-97 (R2009)*Advisor*DeceasedPersonnel (Original)AWS A5 Committee on Filler MetalsD. J. Kotecki, Chair The L

35、incoln Electric CompanyR. A. LaFave, lst Vice Chair Elliott CompanyJ. P. Hunt, 2nd Vice Chair Inco Alloys International, IncorporatedJ. C. Meyers, Secretary American Welding SocietyB. E. Anderson AlcoTec Wire Company*R. L. Bateman Electromanufacturas S. A.R. A. Bonneau U.S. Army Research LaboratoryR

36、. S. Brown Carpenter Technology CorporationR. A. Bushey Esab Group, IncorporatedJ. Caprarola, Jr. Esab Group, Incorporated*L. J. Christensen ConsultantR. J. Christoffel ConsultantD. J. Crement Precision Components CorporationD. D. Crockett The Lincoln Electric CompanyR. A. Daemen Hobart Brothers Com

37、panyD. A. DelSignore Westinghouse Electric CorporationH. W. Ebert Exxon Research and Engineering CompanyD. A. Fink The Lincoln Electric CompanyC. E. Fuerstenau Lucas-Milhaupt IncorporatedG. A. Hallstrom, Jr. Hallstrom Consultants*R. L. Harris R. L. Harris AssociatesW. S. Howes National Electrical Ma

38、nufacturers AssociationR. W. Jud Chrysler CorporationR. B. Kadiyala Techalloy CompanyG A. Kurisky Maryland Specialty Wire CompanyN. E. Larson Praxair, IncorporatedA. S. Laurenson ConsultantJ. S. Lee Chicago Bridge and Iron Company IncorporatedG. H. MacShane MAC Associates*L. M. Malik Arctec Canada L

39、imitedM. T. Merlo ConsultantA. R. Mertes Ampco Metal, IncorporatedJ. W. Mortimer II ConsultantC. L. Null Naval Sea Systems Command*Y. Ogata Kobe Steel LimitedJ. J. Payne SSI Services, IncorporatedR. L. Peaslee Wall Colmonoy CorporationE. W. Pickering, Jr. ConsultantM. A. Quintana The Lincoln Electri

40、c Company*H. F. Reid Consultant*S. D. Reynolds Jr. Westinghouse Electric CompanyL. F. Roberts Canadian Welding Bureau*D. Rozet ConsultantP. K. Salvesen Det Norske VeritasviiiANSI/AWS A5.26/A5.26M-97 (R2009)AWS A5 Committee on Filler Metals (Continued)W. S. Severance L-Tec Welding and Cutting Systems

41、*W. A. Shopp Editorial ConsultantM. S. Sierdzinski Esab Group, Incorporated*R. G. Sim The Lincoln Electric Company*L. R. Soisson Welding Consultant*R. W. Straiton Bechtel CorporationR. A. Sulit Sulit EngineeringR. S. Swain Thyssen Welding ProductsR. D. Thomas, Jr. R. D. Thomas and Company*R. Timerma

42、n Conarco S.A.R. T. Webster ConsultantH. D. Wehr Arcos Alloys*A. E. Wiehe Consultant*W. L. Wilcox Consultant*F. J. Winsor ConsultantK. G. Wold Siemens Power CorporationAWS A5P Subcommittee on Carbon and Low-Alloy Steel Electrodes for Electroslag and Electrogas WeldingD. A. Fink, Chair The Lincoln El

43、ectric CompanyJ. C. Meyers, Secretary American Welding SocietyR. H. Juers Naval Surface Warfare CenterD. Y. Ku American Bureau of ShippingL. F. Roberts Canadian Welding BureauB. L. Shultz The Taylor Winfield Corporation*R. D. Thomas, Jr. R. D. Thomas therefore each system must be used indepen-dently

44、 of the other, without combining in any way. In selecting rational metric units the ANSI/AWS A1.1, MetricPractice Guide for the Welding Industry, and ISO 544, Welding consumables Technical delivery conditions for weld-ing filler materials Type of product, dimensions, tolerances and markings, are use

45、d as guides. Tables and figuresmakeuse of both U.S. Customary and SI units, which with the application of the specified tolerances provide for interchange-ability of products in both U.S. Customary and SI units.Added Annex B (Informative), Guidelines for the Preparation of Technical Inquiries.The cu

46、rrent document is the second revision of this specification, as shown below:Document DevelopmentANSI/AWS A5.26-78 Specification for Consumables for Electrogas Welding of Carbon and High Strength Low-Alloy SteelsANSI/AWS A5.26-91 Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas

47、WeldingANSI/AWS A5.26-97R Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas WeldingComments and suggestions for the improvement of this standard are welcome. They should be sent to the Secretary,AWS A5 Committee on Filler Metals, American Welding Society, 550 N.W. LeJeune Road,

48、Miami, FL 33126.This page is intentionally blank.xANSI/AWS A5.26/A5.26M-97 (R2009)xiANSI/AWS A5.26/A5.26M-97 (R2009)Table of ContentsPage No.Personnel (Reaffirmation)vPersonnel (Original) viiForeword . ixList of Tables xiiList of Figures xii1. Scope12. Classification.13. Acceptance 14. Certification

49、15. Units of Measure and Rounding-Off Procedure .16. Summary of Tests.57. Retest .58. Weld Test Assemblies.69. Chemical Analysis 610. Radiographic Test 611. Tension Test.712. Impact Test .813. Method of Manufacture.814. Standard Sizes 915. Finish and Uniformity .916. Standard Package Forms.1017. Winding Requirements1018. Electrode Identification .1319. Packaging1320. Marking of Packages .13Annex A (Informative)Guide to AWS Specification for Carbon and Low-Alloy Steel Electrodes forAnnex A (Informative)Electrogas Welding17Annex B (InformativeGuidelines for the Preperation of Tech