ANSI AWS A5.25 A.25M-1997 Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding《碳钢和高强度低合金钢电渣焊用自耗品规范》.pdf

《ANSI AWS A5.25 A.25M-1997 Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding《碳钢和高强度低合金钢电渣焊用自耗品规范》.pdf》由会员分享，可在线阅读，更多相关《ANSI AWS A5.25 A.25M-1997 Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding《碳钢和高强度低合金钢电渣焊用自耗品规范》.pdf（37页珍藏版）》请在麦多课文档分享上搜索。

1、Specification forCarbon andLow-Alloy SteelElectrodes andFluxes forElectroslagWeldingANSI/AWS A5.25/A5.25M-97RAn American National StandardCopyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-550 N.

2、W. LeJeune Road, Miami, Florida 33126ANSI/AWS A5.25/A5.25M-97RAn American National StandardApproved byAmerican National Standards InstituteDecember 8, 1997Specification forCarbon and Low-Alloy SteelElectrodes and Fluxes forElectroslag WeldingSupersedes ANSI/AWS A5.25-91Prepared byAWS Committee on Fi

3、ller MetalsUnder the Direction ofAWS Technical Activities CommitteeApproved byAWS Board of DirectorsAbstractClassification requirements are specified for fluxes and solid and composite metal cored electrodes for electroslagwelding. The requirements for electrodes include chemical composition of the

4、electrode for solid electrodes and of weldmetal for metal cored electrodes. Requirements for fluxes include the mechanical properties and soundness of weldmetal taken from a groove weld made with a particular electrode using a prescribed welding procedure. Standard elec-trode sizes, marking, and pac

5、kaging requirements are included.This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these arenot equivalent, each system must be used independently of the other.Key Words Filler metal specifications, low-alloy steel electrodes, carbon steel el

6、ectrodes, arc welding electrodes, metal cored electrodes, electroslag weldingCopyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Statement on Use of AWS American National StandardsAll standards (c

7、odes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of theAmerican National Standards Institute (ANSI). When AWS standards are either incorporat

8、ed in, or made part of, docu-ments that are included in federal or state laws and regulations, or the regulations of other governmental bodies, theirprovisions carry the full legal authority of the statute. In such cases, any changes in those AWS standards must be ap-proved by the governmental body

9、having statutory jurisdiction before they can become a part of those laws and regula-tions. In all cases, these standards carry the full legal authority of the contract or other document that invokes the AWSstandards. Where this contractual relationship exists, changes in or deviations from requirem

10、ents of an AWS standardmust be by agreement between the contracting parties.International Standard Book Number: 0-87171-539-2American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126 1998 by American Welding Society. All rights reservedPrinted in the United States of AmericaReaffirmed: Februa

11、ry 28, 2003AWS American National Standards are developed through a consensus standards development process that bringstogether volunteers representing varied viewpoints and interests to achieve consensus. While AWS administers the processand establishes rules to promote fairness in the development o

12、f consensus, it does not independently test, evaluate, orverify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whether spe-cial, indirect, conseq

13、uential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on thisstandard. AWS also makes no guaranty or warranty as to the accuracy or completeness of any information published herein.In issuing and making this standard available, AWS is not undertaking to

14、render professional or other services for or onbehalf of any person or entity. Nor is AWS undertaking to perform any duty owed by any person or entity to someoneelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek the adviceof a competent pro

15、fessional in determining the exercise of reasonable care in any given circumstances.This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.Publication of this standard does not authorize infringement of any patent. AWS disclaims liabili

16、ty for the infringementof any patent resulting from the use or reliance on this standard.Finally, AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errat

17、a, when discovered, are postedon the AWS web page (www.aws.org).Official interpretations of any of the technical requirements of this standard may be obtained by sending a request, in writing,to the Managing Director, Technical Services Division, American Welding Society, 550 N.W. LeJeune Road, Miam

18、i, FL33126 (see Annex A). With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standardsmay be rendered. However, such opinions represent only the personal opinions of the particular individuals giving them.These individuals do not speak on behalf of AWS, nor do the

19、se oral opinions constitute official or unofficial opinions or inter-pretations of AWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision at any time by the AWS A5 Committee on Filler Metals. It must be

20、reviewed everyfive years, and if not revised, it must be either reapproved or withdrawn. Comments (recommendations, additions, ordeletions) and any pertinent data that may be of use in improving this standard are required and should be addressed toAWS Headquarters. Such comments will receive careful

21、 consideration by the AWS A5 Committee on Filler Metals andthe author of the comments will be informed of the Committees response to the comments. Guests are invited to attendall meetings of the AWS A5 Committee on Filler Metals to express their comments verbally. Procedures for appeal ofan adverse

22、decision concerning all such comments are provided in the Rules of Operation of the Technical ActivitiesCommittee. A copy of these Rules can be obtained from the American Welding Society, 550 N.W. LeJeune Road,Miami, FL 33126.Photocopy RightsAuthorization to photocopy items for internal, personal, o

23、r educational classroom use only, or the internal, personal, oreducational classroom use only of specific clients, is granted by the American Welding Society (AWS) provided that theappropriate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, Tel: 978-750-8400;onl

24、ine: http:/.Copyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-iii*Advisor*DeceasedPersonnelAWS Committee on Filler MetalsR. A. LaFave, Chair Elliott CompanyJ. P. Hunt, First Vice Chair Consultan

25、tD. A. Fink, Second Vice Chair The Lincoln Electric CompanyH. M. Woodward, Secretary American Welding Society*R. L. Bateman Electromanufacturas S. A.R. S. Brown Carpenter Technology CorporationR. A. Bushey ESAB Welding and Cutting ProductsJ. Caprarola, Jr. Consultant*L. J. Christensen ConsultantR. J

26、. Christoffel ConsultantD. D. Crockett The Lincoln Electric CompanyR. A. Daemen ConsultantD. A. DelSignore ConsultantR. L. Drury III Caterpillar IncorporatedH. W. Ebert Exxon Research and Engineering CompanyJ. G. Feldstein Foster Wheeler Energy CorporationS. E. Ferree ESAB Welding and Cutting Produc

27、tsL. Flasche Haynes International IncorporatedC. E. Fuerstenau Alloy Ring ServiceG. A. Hallstrom, Jr. Hallstrom ConsultantsJ. A. Henning Westinghouse Electric CompanyR. B. Kadiyala Techalloy CompanyP. J. Konkol Concurrent Technologies CorporationD. J. Kotecki The Lincoln Electric CompanyD. Y. Ku Ame

28、rican Bureau of ShippingN. E. Larson Compressed Gas IndustriesA. S. Laurenson ConsultantJ. S. Lee Chicago Bridge and Iron Company IncorporatedG. H. MacShane MAC AssociatesW. A. Marttila Chrysler Corporation*L. M. Malik Arctec Canada LimitedR. Menon Stoody CompanyM. T. Merlo Select Arc IncorporatedA.

29、 R. Mertes Ampco Metal, IncorporatedM. D. Morin ABB Power GenerationC. L. Null Naval Sea Systems CommandJ. J. Payne ConsultantR. L. Peaslee Wall Colmonoy CorporationE. W. Pickering, Jr. ConsultantM. A. Quintana The Lincoln Electric Company*H. F. Reid Consultant*S. D. Reynolds Jr. ConsultantL. F. Rob

30、erts Canadian Welding Bureau*D. Rozet ConsultantCopyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ivAWS Committee on Filler Metals (Continued)P. K. Salvesen Det Norske VeritasJ. M. Sawhill, Jr.

31、Newport News ShipbuildingA. P. Seidler Armco Steel CompanyW. S. Severance ESAB Welding and Cutting Products*W. A. Shopp Editorial ConsultantM. S. Sierdzinski ESAB Welding and Cutting Products*R. G. Sim The Lincoln Electric CompanyE. R. Stevens Fisher Controls International, Incorporated*R. W. Strait

32、on Bechtel CorporationR. A. Sulit Sulit EngineeringR. S. Swain Euroweld, Limited, Welding DivisionR. D. Thomas, Jr. R. D. Thomas and CompanyK. P. Thornberry J. W. Harris Company*R. Timerman Conarco SA*S. Tsutsumi Kobe Steel, LimitedL. T. Vernam AlcoTec Wire Company G. J. Vytanovych Mobil Technology

33、CompanyT. R. Warren Ingalls Shipbuilding IncorporatedH. D. Wehr Arcos Alloys*F. J. Winsor ConsultantK. G. Wold Siemens Power CorporationAWS Subcommittee on Carbon and Low-AlloySteel Electrodes for Electroslag and Electrogas WeldingD. A. Fink, Chair The Lincoln Electric CompanyH. M. Woodward, Secreta

34、ry American Welding SocietyJ. H. Devletian Oregon Graduate InstituteR. H. Juers Naval Surface Warfare Center*W. M. Kavicky Trans Bay Steel CorporationD. Y. Ku American Bureau of ShippingJ. S. Lee Chicago Bridge and Iron CompanyL. F. Roberts Canadian Welding BureauB. L. Shultz The Taylor Winfield Cor

35、porationL. D. Smith Beloit Corporation*R. D. Thomas, Jr. R. D. Thomas and Company*AdvisorCopyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-vForeword(This Foreword is not a part of ANSI/AWS A5.25

36、/A5.25M-97, Specification for Carbon and Low-Alloy Steel Elec-trodes and Fluxes for Electroslag Welding, but is included for information purposes only).This document is the first of the A5.25 specifications to use both U.S. Customary Units and the International Systemof Units (SI). The measurements

37、are not exact equivalents; therefore, each system must be used independently of theother, without combining in any way. In selecting rational metric units, the ANSI/AWS A1.1, Metric Practice Guide forthe Welding Industry, and ISO 864, Solid Wires for Gas Shielded Metal Arc Welding of Mild Steel, are

38、 used as guides. Ta-bles and figures make use of both U.S. Customary and SI Units, which with the application of the specified tolerancesprovide for interchangeability of products in both U.S. Customary and SI Units.The current document is the second revision of this specification, as shown below:Do

39、cument DevelopmentAWS A5.25-78 Specification for Consumables Used for Electroslag Welding of Carbon and High StrengthLow Alloy SteelsANSI/AWS A5.25-91 Specification for Carbon and Low Alloy Steel Electrodes and Fluxes for Electroslag WeldingComments and suggestions for the improvement of this standa

40、rd are welcome. They should be sent to the Secretary,Committee on Filler Metals, American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126.Official interpretations of any of the technical requirements of this standard may be obtained by sending a request, inwriting, to the Managing Director,

41、Technical Services Division, American Welding Society. A formal reply will beissued after it has been reviewed by the appropriate personnel following established procedures.Copyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted

42、without license from IHS-,-,-viTable of ContentsPage No.Personnel iiiForeword . vList of Tables viiList of Figures vii1. Scope1Part AGeneral Requirements2. Classification13. Acceptance .14. Certification .15. Units of Measure and Rounding-Off Procedure 1Part BTests, Procedures, and Requirements6. Su

43、mmary of Tests.47. Retest48. Weld Test Assemblies 59. Chemical Analysis .610. Radiographic Test.811. Tension Test .812. Impact Test.8Part CManufacture, Identification, and Packaging13. Method of Manufacture .914. Electrode Requirements .915. Flux Requirements .14AnnexGuide to AWS Specification for C

44、arbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag WeldingA1. Introduction17A2. Classification System 17A3. Acceptance.20A4. Certification .20A5. Ventilation During Welding.20A6. Welding Considerations.20A7. Discontinued Classifications .21A8. Safety Considerations 22AWS Filler Metal Sp

45、ecifications by Material and Welding Process 25AWS Filler Metal Specifications and Related Documents 27Copyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-viiList of TablesTable Page No.1 Chemical

46、 Composition Requirements for Solid Electrodes 22 Chemical Composition Requirements for Weld Metal from Composite Metal Cored Electrodes 33 A5.25 Tension Test Requirements (As Welded) 33M A5.25M Tension Test Requirements (As Welded).34 A5.25 Impact Test Requirements (As Welded)44M A5.25M Impact Test

47、 Requirements (As Welded) 45 Required Tests56 Base Metals for Test Assemblies .87 Standard Sizes 118 Standard Package Dimensions and Weights 12A1 Comparison of A5.25/A5.25M Classifications and Classifications in Other AWS Specificationsand Proposed ISO Designations.18List of FiguresFigure Page No.1

48、Weld Ingot62 Groove Weld Test Assembly for Mechanical Properties and Soundness 73 Tension Test Specimen.94 Radiographic Acceptance Standards105 Charpy V-Notch Impact Test Specimen.116A Dimensions of 12 and 14 in. 300 and 350 mm Standard Spools.136B Dimensions of 22, 24, and 30 in. 560, 610, and 760

49、mm Standard Spools (Reels) 14A1 Classification System.18Copyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright American Welding Society Provided by IHS under license with AWSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-11. ScopeThis specif