ANSI ATIS 1000008-2006 ANSI Extensions to the Narrowband Signaling Syntax (NSS) - Syntax Definition.pdf

《ANSI ATIS 1000008-2006 ANSI Extensions to the Narrowband Signaling Syntax (NSS) - Syntax Definition.pdf》由会员分享，可在线阅读，更多相关《ANSI ATIS 1000008-2006 ANSI Extensions to the Narrowband Signaling Syntax (NSS) - Syntax Definition.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-1000008.2006(R2011) ANSI Extensions to the Narrowband Signaling Syntax (NSS) Syntax Definition ATIS is the leading technical planning and standards development organization committed to the rapid development of global, market-driven standards f

2、or the information, entertainment and communications industry. More than 250 companies actively formulate standards in ATIS 18 Committees, covering issues including: IPTV, Service Oriented Networks, Energy Efficiency, IP-Based and Wireless Technologies, Quality of Service, and Billing and Operationa

3、l Support. In addition, numerous Incubators, Focus and Exploratory Groups address emerging industry priorities including “Green”, IP Downloadable Security, Next Generation Carrier Interconnect, IPv6 and Convergence. ATIS is the North American Organizational Partner for the 3rd Generation Partnership

4、 Project (3GPP), a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications Sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more information, please visit . AMERICAN NATIONAL STANDARD Approval of an Americ

5、an National Standard requires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by dir

6、ectly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made towards their resolution. The use of American National Standards i

7、s completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not de

8、velop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretati

9、ons should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically

10、to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer all references to T1.113 in the text below apply to ATIS-1000113.2006. T1.6

11、07-2000 (R2004), Integrated Services Digital Network (ISDN) Layer 3 Signalling Specification for Circuit Switched Bearer Service for Digital Subscriber Signalling System Number 1 (DSS1).1ISO 3166-1 (1997), Codes for the representation of names of countries and their subdivisions - Part 1: Country co

12、des.2ITU-T Q.1902.3 (2001), Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN user part: Formats and codes, plus Amendment 1 (2002), Support for the International Emergency Preference Scheme.3ITU-T Q.1980.1, The Narrowband Signalling Syntax (NSS) Syntax Def

13、inition.3ITU-T Recommendation H.323 Amendment 2 (01/2005), Packet-based multimedia communications systems Amendment 2: New Annex M4 Tunnelling of narrowband signalling syntax (NSS) for H.323.33 DEFINITIONS, ACRONYMS, however, these field names (tags) are not transmitted in the compact encoding used

14、on the wire. 6.3.1 Business Group (BSG) Format: BSG,as=a,bgid_type=a,lp_ind=a,ps=a,bgid=aaaaaa,sgid=aaaa,lp=aa Fields: ATIS-1000008.2006 6 Field-01: as - attendant status a description - - u - unknown y - Attendant line 0 - no indication Field-02: bgid_type - business group identifier type a descrip

15、tion - - u - unknown y - Interworking with private network identifier n - Multi-location business group identifier Field-03: lp_ind - line privileges information indicator a description - - u - unknown y - Customer defined line privileges n - Fixed line privileges Field-04: ps - party selector a des

16、cription - - 0 - No indication 1 - Calling party number 2 - Called party number 3 - Connected party number 4 - Redirecting number 5 - Original called number Note: 0 to F shall cover the 4 bits in ISUP/BICC specs. Field-05: bgid - business group identifier hhhhhh description - - 000000 - unknown -FFF

17、FFF - hexadecimal numbers 0-9, A-F Field-06: sgid - sub-group identifier hhhh description - - 0000 - unknown -FFFF - hexadecimal numbers 0-9, A-F Field-07: lp - line privileges hh description - - 00 - unknown -FF - hexadecimal numbers 0-9, A-F Note: Further separation based on lp_ind is also possibl

18、e. 6.3.2 Carrier Identification (CID) Format: CID,ton=a,cid=1*h Fields: Field-01: ton - type of network a description ATIS-1000008.2006 7 - - u - unknown c - ITU/CCITT n - national Field-02: cid - carrier id 1*h description - - 1*h - 1 or more characters 0-9, A-F to identify the carrier (e.g., 0-F,

19、10-FF, 100-FFF, 1000-FFFF, etc., see Annex A) 6.3.3 Carrier Service Provider Information (CSP) Format: CSP,type=a,sp=d,es=d,#=1*h Fields: Field-01: typ - carrier service provider identifier (CSPI) type a definition - - u - unknown 1 - intraLATA toll carrier 2 - interLATA toll carrier 3 - internation

20、al carrier Field-02: sp - selected/potential d description - - 0 - selected 1 - potential Field-03: es - Encoding scheme d description - - 0 - BCD even 1 - BCD odd 2 - IA5 3 binary NSS-specific Field-04: # - digits 1*h description - - 1*h - one or more telephony digits: 0-9 A-F (see formal grammar)

21、6.3.4 Charge Number (CHN) Format: CHN,noa=dd,npi=a,#=1*h Fields: Field-01: noa - nature of address Note: The noa field follows the convention established in T1.113 for Charge Number nature of address, which does not contain the same value set as other parameters containing noa as listed in Section 6

22、.4.3 below. dd description - - 00 - unknown 01 - calling subscriber - not available ATIS-1000008.2006 8 02 - calling subscribers number 03 - calling subscriber - national number 04 - calling subscriber - international number 05 - calling subscriber VPN 06 - called subscriber no number present 07 - c

23、alled subscriber number 08 - called subscriber national number 09 - called subscriber international number 10 - called subscriber VPN Field-02: npi - numbering plan indicator a description - - u - unknown 1 - ISDN numbering plan (recommendation E164) 2 - Data numbering plan (recommendation X.121) 3

24、- Telex numbering plan (recommendation F.69) 4 - Private numbering plan 5 - national 6 - maritime mobile 7 - land mobile 8 - isdn mobile Field-06: # - address 1*h description - - 1*h - one or more telephony digits: 0-9 A-F (see formal grammar) 6.3.5 Egress (EGR) Format: EGR,egr=1*(2Hex) Fields: Fiel

25、d-01: egr - egress 1*(2h) description - - 1*(2h) - one or more pairs of characters (0-9, A-F) representing a hexadecimal encoding (see Q.1980.1 clause 5.1). 6.3.6 Generic Name (GEN) Format: GEN,pi=a,avail=a,ton=d,name=1*(2Hex) Fields: Field-01: pi - Presentation a description - - u - unknown y - pre

26、sentation allowed n - presentation restricted b - blocking toggle Field-02: avail - Availability a description - - y name available/unknown ATIS-1000008.2006 9 n name not available Field-03: ton - Type of Name d description - - 0 - calling name 1 - original calling name 2 - redirecting name 3 - conn

27、ected name Field-04: name - name (sequence of IA5 characters) 1*(2h) description - - 1*(2h) - one or more pairs of characters (0-9, A-F) representing a hexadecimal encoding (see Q.1980.1 clause 5.1). (If unknown, parameter is omitted.) 6.3.7 Jurisdiction (JUR) Format: JUR,jur=hhhhhh Fields: Field1 :

28、 jur - jurisdiction information hhhhhh definition - - 000000 - unknown -FFFFFF six ASCII characters representing a hexadecimal value 6.3.8 Local Service Provider Information (LSP) Format: LSP,type=d,es=d,ci=d,#=1*h Fields: Field-01: typ - local service provider identifier (LSPI) type d definition -

29、- u - unknown 1 - switch owner 2 - account owner Field-02: es - Encoding scheme d description - - 0 - BCD even 1 - BCD odd 2 - IA5 3 - binary Field-03: ci - context identification d description - - 0 - null 1 - native 2 - unbundled 3 - resold 4 - wireless native ATIS-1000008.2006 10 5 - wireless res

30、old Field-04: # - digits 1*h description - - 1*h - one or more telephony digits: 0-9 A-F (see formal grammar) 6.3.9 Network Transport (NET) Format: NET,dat=1*(2Hex) Fields: Field-01: dat - network transport data 1*(2h) description - - 1*(2h) - one or more pairs of characters (0-9, A-F) representing

31、a hexadecimal encoding (see Q.1980.1 clause 5.1). (If unknown, parameter is omitted.) 6.3.10 Operator Services Information (OSI) Format: OSI,type=dd,field container Based on the value of “type“, one of the following field containers will follow. Fields: Field-01: type - type of Operator Services Inf

32、ormation dd definition - - 01 - original access prefix field container 1 02 - bill-to information entry type and handling type field container 2 03 - bill-to type field container 3 04 - bill-to specific information field container 4 05 - special handling field container 5 06 - access signalling fiel

33、d container 6 Field Containers: Field Container 1 (type=01) Format: iv=dd Fields: Field-02: iv - information value dd definition - - 00 - unknown 01 - 1+ or 011+ 02 - 0+ or 01+ 03 - 0- Field Container 2 (type = 02) ATIS-1000008.2006 11 Format: iv=dd Fields: Field-02: iv - information value dd defini

34、tion - - 00 - information entry unknown, unknown handling 01 - information entry manual by operator, station handling 02 - information entry manual by operator, person handling 03 - information entry manual by tone input, station handling 04 - information entry unknown, station handling 05 - informa

35、tion entry unknown, person handling 06 - information entry manual by operator, unknown handling 07 - information entry automated by tone input, unknown handling 08 - information entry automated by tone input, person handling 09 - information entry automated by spoken input, unknown handling 10 - inf

36、ormation entry automated by spoken input, station handling 11 - information entry automated by spoken input, person handling Field Container 3 (type = 03) Format: iv=dd Fields: Field-02: iv - information value dd definition - - 00 - unknown 01 - card - 14 digit format 02 - card - 89C format 03 - car

37、d - other format 04 - collect 05 - third number 06 - sent paid Field Container 4 (type = 04) Format: iv=dd Fields: Field-02: iv - information value dd definition - - 01 - NIDB authorizes 02 - NIDB reports, verify by authorized means 03 - NIDB reports, verify by operator 04 - no NIDB query 05 - no NI

38、DB response 06 - NIDB reports unavailable 07 - no NIDB response - timeout 08 - no NIDB response - reject component 09 - no NIDB response - ACG in effect 10 - no NIDB response - SCCP failure Field Container 5 (type = 05) ATIS-1000008.2006 12 Format: iv=dd Fields: Field-02: iv - information value dd d

39、efinition - - 00 - unknown 01 - call completion 02 - rate information 03 - trouble reporting 04 - time and charges 05 - credit reporting 06 - general assistance Field Container 6 (type = 07) Format: iv=dd Fields: Field-02: iv - information value dd definition - - 00 - unknown 01 - dial pulse 02 - du

40、al tone multifrequency 6.3.11 Originating Line Information (OLI) Format: OLI,oli=dd Fields: Field-01: oli - Originating Line Information dd description - - 00 - pots 01 - multiparty line 02 - ANI failure 06 - Station Level Rating 07 - special operator handling required 08 - inter-LATA restricted 10

41、- test call 20 - AIOD-listed DN sent 23 - coin or non-coin on calls using database access 24 - 800 service call 25 - 800 service call from a pay station 27 - payphone using coin control signalling 29 - prison/inmate service 30 - intercept (blank) 31 - intercept (trouble) 32 - intercept (regular) 34

42、- telco operator handled call 36 - CPE 52 - OUTWATS 60 - TRS call from unrestricted line 61 - wireless/cellular PCS (type 1) 62 - wireless/cellular PCS (type 2) ATIS-1000008.2006 13 63 - wireless/cellular PCS (roaming) 66 - TRS call from hotel 67 - TRS call from restricted line 68 - inter-LATA restr

43、icted hotel 78 - inter-LATA restricted coin-less 70 - private pay-stations 93 - private virtual network 6.3.12 Outgoing Trunk Group Number (OTN) Format: OTN,tkg=hhhhhh Fields: Field-01: tkg - outgoing trunk group number hhhhhh description - - 000000 - unknown -FFFFFF - six ASCII characters represent

44、ing a hexadecimal value 6.3.13 Special Processing Request (SPR) Format: SPR,spr=ddd Fields: Field-01: spr - special processing request ddd description - - 000 - unknown 001 - service processing requested 6.3.14 Transaction Request (TRR) Format: TRR,tid=1*a,sccp=1*a Fields: Note: coded following Call

45、 Reference Field-01: tid - Transaction ID 1*a description - - IA5 - IA5 printable characters of the form: token token See definition of TID (Q.1980.1 clause 7.3.96) Field-02: sccp - SCCP address 1*a description - - u - unknown IA5 - 1*a means one or more IA5 characters (excludes delimiters) ATIS-100

46、0008.2006 14 6.4 Detailed Parameter Descriptions for New Field and Field Value ANSI Extensions This clause describes the addition of new fields and new field values to parameters defined in Q.1980.1. These fields and field values may be present in NSS messages when the PRN parameter Field-01 indicat

47、es a protocol of “t1113”. The designation “a“ means all possible characters allowed according to Q.1980.1 clause 5.1, unless otherwise constrained by the field description. The designation “d“ means only characters 0-9 are used. The designation “h“ means that the field or sub-field is to be hexadeci

48、mal-encoded. The first field value for most fields will be the “unknown“ value. “Unknown“ means that the information was absent or unavailable at the source of the NSS encoding. The left-hand columns in the following clauses are literal values to be used as codepoints. The Format lines show “=“ prece