ANSI ASHRAE 34 ADD AM-2017 Designation and Safety Classification of Refrigerants.pdf

《ANSI ASHRAE 34 ADD AM-2017 Designation and Safety Classification of Refrigerants.pdf》由会员分享，可在线阅读，更多相关《ANSI ASHRAE 34 ADD AM-2017 Designation and Safety Classification of Refrigerants.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI/ASHRAE Addendum am toANSI/ASHRAE Standard 34-2016Designation andSafety Classification ofRefrigerantsApproved by the ASHRAE Standards Committee on January 28, 2017; by the ASHRAE Tech Council on February 1, 2017;and by the American National Standards Institute on February 2, 2017.This addendum w

2、as approved by a Standing Standard Project Committee (SSPC) for which the Standards Committee has estab-lished a documented program for regular publication of addenda or revisions, including procedures for timely, documented, con-sensus action on requests for change to any part of the standard. The

3、change submittal form, instructions, and deadlines may beobtained in electronic form from the ASHRAE website (www.ashrae.org) or in paper form from the Senior Manager of Standards. The latest edition of an ASHRAE Standard may be purchased on the ASHRAE website (www.ashrae.org) or from ASHRAE Cus-tom

4、er Service, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 678-539-2129. Telephone: 404-636-8400 (worldwide), or toll free 1-800-527-4723 (for orders in US and Canada). For reprint permission, go towww.ashrae.org/permissions. 2017 ASHRAE ISSN 1041-2336ASHRAE is a regi

5、stered trademark of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.ANSI is a registered trademark of the American National Standards Institute.SPECIAL NOTEThis American National Standard (ANS) is a national voluntary consensus Standard developed under the auspices

6、 of ASHRAE. Consensus is definedby the American National Standards Institute (ANSI), of which ASHRAE is a member and which has approved this Standard as an ANS, as“substantial agreement reached by directly and materially affected interest categories. This signifies the concurrence of more than a sim

7、ple majority,but not necessarily unanimity. Consensus requires that all views and objections be considered, and that an effort be made toward their resolution.”Compliance with this Standard is voluntary until and unless a legal jurisdiction makes compliance mandatory through legislation. ASHRAE obta

8、ins consensus through participation of its national and international members, associated societies, and public review.ASHRAE Standards are prepared by a Project Committee appointed specifically for the purpose of writing the Standard. The ProjectCommittee Chair and Vice-Chair must be members of ASH

9、RAE; while other committee members may or may not be ASHRAE members, allmust be technically qualified in the subject area of the Standard. Every effort is made to balance the concerned interests on all Project Committees. The Senior Manager of Standards of ASHRAE should be contacted fora. interpreta

10、tion of the contents of this Standard,b. participation in the next review of the Standard,c. offering constructive criticism for improving the Standard, ord. permission to reprint portions of the Standard.DISCLAIMERASHRAE uses its best efforts to promulgate Standards and Guidelines for the benefit o

11、f the public in light of available information and acceptedindustry practices. However, ASHRAE does not guarantee, certify, or assure the safety or performance of any products, components, or systemstested, installed, or operated in accordance with ASHRAEs Standards or Guidelines or that any tests c

12、onducted under its Standards or Guidelineswill be nonhazardous or free from risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDSASHRAE Standards and Guidelines are established to assist industry and the public by offering a uniform method of testing for rating purposes, bysuggesting safe practices

13、 in designing and installing equipment, by providing proper definitions of this equipment, and by providing other informationthat may serve to guide the industry. The creation of ASHRAE Standards and Guidelines is determined by the need for them, and conformanceto them is completely voluntary.In ref

14、erring to this Standard or Guideline and in marking of equipment and in advertising, no claim shall be made, either stated or implied,that the product has been approved by ASHRAE.ASHRAE STANDARDS COMMITTEE 20162017Rita M. Harrold, Chair Julie M. Ferguson Cyrus H. NasseriSteven J. Emmerich, Vice-Chai

15、r Michael W. Gallagher David RobinJames D. Aswegan Walter T. Grondzik Peter SimmondsNiels Bidstrup Vinod P. Gupta Dennis A. StankeDonald M. Brundage Susanna S. Hanson Wayne H. Stoppelmoor, Jr.Waller S. Clements Roger L. Hedrick Jack H. ZarourDrury B. Crawley Rick M. Heiden William F. Walter, BOD ExO

16、John F. Dunlap, Srinivas Katipamula Patricia Graef, COJames W. Earley, Jr. Arsen K. MelikovKeith I. Emerson R. Lee Millies, Jr.Stephanie C. Reiniche, Senior Manager of StandardsASHRAE Standing Standard Project Committee 34Cognizant TC: 3.1, Refrigerants and Secondary CoolantsSPLS Liaison: Drury Craw

17、leyStaff Liaison: Brian CoxDebra H. Kennoy*, Chair John Senediak* Andrew KusmierzSean Cunningham*, Vice-Chair Ganesan (Sonny) Sundaresan* Thomas J. LeckWarren Clough* Kenji Takizawa* Julie MajurinGary W. Jepson* Samuel F. Yanna-Motta* Robert G. RichardJay A. Kohler* Eric M. Smith* George M. RuschSte

18、phen Kujak* David L. Rule* Valerie ShultzScott MacLeod* Paul H. Dugard Jian Sun-BlanksChun-Cheng Piao* Brian A. Fricke Jing ZhengMarc Scancarello* Tatsuro Kobayashi David P. Wilson*Christopher J. Seeton* William Kopko* Denotes members of voting status at the time of publication* Denotes consultant A

19、SHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.ANSI/ASHRAE Addendum am to ANSI/ASHRAE Standard 34-2016 1(This foreword is not part of this standard. It is

20、merelyinformative and does not contain requirements necessaryfor conformance to the standard. It has not been pro-cessed according to the ANSI requirements for a standardand may contain material that has not been subject topublic review or a consensus process. Unresolved objec-tors on informative ma

21、terial are not offered the right toappeal at ASHRAE or ANSI.)FOREWORDThis addendum adds the zeotropic refrigerant blend R-460Ato Tables 4-2 and D-2.Note: In this addendum, changes to the current standardare indicated in the text by underlining (for additions) andstrikethrough (for deletions) unless

22、the instructions specifi-cally mention some other means of indicating the changes. TABLE 4-2 Data and Safety Classifications for RefrigerantBlendsRefrigerant Number = 460AComposition (Mass %) = R-32/125/134a/1234ze(E) (12.0/52.0/14.0/22.0)Composition Tolerances = 1.0/1.0/1.0/1.0OEL = 650Safety Group

23、 = A1RCL = 92,000 ppm v/v; 24 lb/Mcf; 380 g/m3Highly Toxic or Toxic Under Code Classification = NeitherTABLE D-2 Data for Refrigerant BlendsRefrigerant Number = 460AComposition (Mass %) = R-32/125/134a/1234ze(E) (12.0/52.0/14.0/22.0)Average Molecular Mass = 100.6 g/mol Bubble Point (F) = 48.3Dew Poi

24、nt (F) = 35.0Bubble Point (C) = 44.6Dew Point (C) = 37.2Addendum am to Standard 34-2016Add the following underlined data to Table 4-2 and TableD-2 in the columns indicated. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digit

25、al form is not permitted without ASHRAEs prior written permission. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.POLICY STATEMENT DEFINING ASHRAES CONCER

26、NFOR THE ENVIRONMENTAL IMPACT OF ITS ACTIVITIESASHRAE is concerned with the impact of its members activities on both the indoor and outdoor environment.ASHRAEs members will strive to minimize any possible deleterious effect on the indoor and outdoor environment ofthe systems and components in their

27、responsibility while maximizing the beneficial effects these systems provide,consistent with accepted Standards and the practical state of the art.ASHRAEs short-range goal is to ensure that the systems and components within its scope do not impact theindoor and outdoor environment to a greater exten

28、t than specified by the Standards and Guidelines as established byitself and other responsible bodies.As an ongoing goal, ASHRAE will, through its Standards Committee and extensive Technical Committee structure,continue to generate up-to-date Standards and Guidelines where appropriate and adopt, rec

29、ommend, and promotethose new and revised Standards developed by other responsible organizations.Through its Handbook, appropriate chapters will contain up-to-date Standards and design considerations as thematerial is systematically revised.ASHRAE will take the lead with respect to dissemination of e

30、nvironmental information of its primary interest andwill seek out and disseminate information from other responsible organizations that is pertinent, as guides to updatingStandards and Guidelines.The effects of the design and selection of equipment and systems will be considered within the scope of

31、thesystems intended use and expected misuse. The disposal of hazardous materials, if any, will also be considered.ASHRAEs primary concern for environmental impact will be at the site where equipment within ASHRAEs scopeoperates. However, energy source selection and the possible environmental impact

32、due to the energy source andenergy transportation will be considered where possible. Recommendations concerning energy source selectionshould be made by its members. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form

33、 is not permitted without ASHRAEs prior written permission.ASHRAE 1791 Tullie Circle NE Atlanta, GA 30329 www.ashrae.org About ASHRAEASHRAE, founded in 1894, is a global society advancing human well-being through sustainable technology for thebuilt environment. The Society and its members focus on b

34、uilding systems, energy efficiency, indoor air quality,refrigeration, and sustainability. Through research, Standards writing, publishing, certification and continuingeducation, ASHRAE shapes tomorrows built environment today. For more information or to become a member of ASHRAE, visit www.ashrae.or

35、g.To stay current with this and other ASHRAE Standards and Guidelines, visit www.ashrae.org/standards.Visit the ASHRAE BookstoreASHRAE offers its Standards and Guidelines in print, as immediately downloadable PDFs, on CD-ROM, and viaASHRAE Digital Collections, which provides online access with autom

36、atic updates as well as historical versions ofpublications. Selected Standards and Guidelines are also offered in redline versions that indicate the changes madebetween the active Standard or Guideline and its previous version. For more information, visit the Standards andGuidelines section of the A

37、SHRAE Bookstore at www.ashrae.org/bookstore.IMPORTANT NOTICES ABOUT THIS STANDARDTo ensure that you have all of the approved addenda, errata, and interpretations for thisStandard, visit www.ashrae.org/standards to download them free of charge.Addenda, errata, and interpretations for ASHRAE Standards and Guidelines are no longerdistributed with copies of the Standards and Guidelines. ASHRAE provides these addenda,errata, and interpretations only in electronic form to promote more sustainable use ofresources.2/17