ANSI ASABE S584.3-2013 Agricultural Equipment Speed Identification Symbol (SIS).pdf

《ANSI ASABE S584.3-2013 Agricultural Equipment Speed Identification Symbol (SIS).pdf》由会员分享，可在线阅读，更多相关《ANSI ASABE S584.3-2013 Agricultural Equipment Speed Identification Symbol (SIS).pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI/ASAE S584.3 JAN2013 Agricultural Equipment: Speed Identification Symbol (SIS) American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization, of members worldwide, who are dedicated to advancement of engineering applicable to agricultural, food, an

2、d biological systems. ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural and Biological Engineers to meet standardization needs within the scope of the Society; principally agricultural field equipment, farmstead equipment, structures, soil and wate

3、r resource management, turf and landscape equipment, forest engineering, food and process engineering, electric power applications, plant and animal environment, and waste management. NOTE: ASABE Standards, Engineering Practices, and Data are informational and advisory only. Their use by anyone enga

4、ged in industry or trade is entirely voluntary. The ASABE assumes no responsibility for results attributable to the application of ASABE Standards, Engineering Practices, and Data. Conformity does not ensure compliance with applicable ordinances, laws and regulations. Prospective users are responsib

5、le for protecting themselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Data initially approved prior to the society name change in July of 2005 are designated as “ASAE“, regardless of the revision approval date. Newly developed Standards, Engineering

6、Practices and Data approved after July of 2005 are designated as “ASABE“. Standards designated as “ANSI“ are American National Standards as are all ISO adoptions published by ASABE. Adoption as an American National Standard requires verification by ANSI that the requirements for due process, consens

7、us, and other criteria for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but no

8、t necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. CAUTION NOTICE: ASABE and ANSI standards may be revised or withdrawn at any time. Additionally, procedures of ASABE require that action be taken perio

9、dically to reaffirm, revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. All rights reserved. ASABE, 2950 Niles Road, St. Joseph, Ml 49085-9659, USA, phone 269-429-0300, fax 269-429-3852, hqasabe.org ANSI/ASAE S584.3 JAN2013 Copyright American Soci

10、ety of Agricultural and Biological Engineers 1 ANSI/ASAE S584.3 JAN2013 Revision approved February 2013 as an American National Standard Agricultural Equipment: Speed Identification Symbol (SIS) Proposed by the ASAE Lighting and Marking Subcommittee; approved by the Power and Machinery Division Janu

11、ary 2005; approved by ANSI January 2005; revised August 2006; revision approved by ANSI August 2006; revised December 2011; revision approved by ANSI December 2011; revised January 2013; revision approved by ANSI February 2013. Keywords: SIS, SMV, Speed, Symbols Introduction Implements of husbandry/

12、agricultural equipment operations include the transport of commodities and equipment from the field sites to farmsteads, storage facilities and gathering points for movement by mass transit systems. Equipment often moves between farmsteads and field sites that are not contiguous. Transport may invol

13、ve moving on public roads (infrastructure) that permits faster ground speeds than that which is used in the fields or within the design considerations of the equipment. Design approaches have been identified to permit selected equipment to move at faster ground speeds in transport configurations. Th

14、is standard provides a means of identifying equipment that has been specifically designed for ground speeds greater than 40 km/h (25 mile/h) but under 65 km/h (40 mile/h), when operating or traveling on public roads. The means of identification is a Speed Identification Symbol (SIS). 1 Scope 1.1 The

15、 scope of this standard is primarily directed to identifying agricultural equipment (implements of husbandry) that have been designed in their original equipment configuration for specified ground speeds greater than 40 km/h (25 mile/h) but under 65 km/h (40 mile/h). 1.2 The standard applies to self

16、 propelled, semi-integral and towed equipment moving on public roads. 1.3 The Speed Identification Symbol (SIS) identifies the maximum equipment ground speed based on the ground speed design capability of the specified piece of equipment. 1.4 The SIS will be used in conjunction with the Slow-Moving

17、Vehicle Emblem (SMV Emblem), ASAE S276. 1.5 The SIS will convey the above information to other operators on public roads approaching from behind the equipment, or for notifying authorities of the equipments specified ground speed capabilities. 1.6 Mounting of the SIS on the front of towed equipment

18、will serve to alert operators of the towing vehicle of the maximum specified ground speed capabilities at which the equipment combination may be operated. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the

19、edition cited applies unless noted. For undated references, the latest approved edition of the referenced document (including any amendments) applies. ANSI/ASAE S279, Lighting and Marking of Agricultural Equipment on Highways ANSI/ASAE S584.3 JAN2013 Copyright American Society of Agricultural and Bi

20、ological Engineers 2 ANSI/ASAE S276, Slow-Moving Vehicle Emblem (SMV Emblem) ASAE S390, Definitions and Classifications of Agricultural Field Equipment PSTC-1: Pressure Sensitive Tape Council standard ISO 3864-1, Table 2 of: Graphic symbols Safety colours and safety signs Part 1: Design principles f

21、or safety signs and safety markings ASTM D1014, Standard practice for conducting exterior exposure tests of paints and coatings on metal surfaces 3 Definitions 3.1 Equipment combination ground speed limitation: The minimum specified ground speed of any individual machine in a towed equipment combina

22、tion. 3.2 Implements of husbandry: A vehicle or special mobile equipment manufactured, designed, or reconstructed for agricultural purposes and, except for incidental uses, primarily used in the conduct of agricultural operations. Included is agricultural equipment in mounted, semi-integral or towed

23、 configurations that are transported by the mobile equipment. 3.3 Public road (highway): The entire width between the boundary lines of every road publicly maintained when any part thereof is open to the use of the public for purposes of vehicular travel. Term includes highways not limited to trucks

24、 and cars, county, municipal roads, and lanes. 3.4 Specified ground speed: Maximum ground speed for which the vehicle, towed or semi mounted equipment has been designed, in its original equipment configuration, giving due consideration to requirements on tire capacity, tracking, stability, braking a

25、nd other related factors. Specified ground speeds for self-propelled equipment shall be with the largest rolling diameter tires available as original equipment, and at the maximum rated engine speed in the top transmission gear or speed range as specified by the original equipment manufacturer. 3.5

26、Speed Identification Symbol (SIS): A sign or emblem, displayed on the equipment or vehicle, used to designate the maximum specified ground speed for which a vehicle or towed machine has been designed to operate. 3.6 Towed equipment combination: Multiple towed machines behind a single towing machine.

27、 4 Dimensions 4.1 The SIS is circular in shape, 200 mm in overall diameter (see Figure 1). 4.2 The black border shall be 10 mm wide, inset from the outside diameter by 5 mm (max). 4.3 The field or center portion and the outside border shall be white. 4.4 The Specified Ground Speed, rounded to the ne

28、arest increments of 5 (e.g.: 40, 45, 50) shall be shown in black. 4.5 The text centered below the Specified Ground Speed number shall be the units of measure for the speed. The units shall be either in km/h or mile/h as appropriate for the intended market. 4.6 The grouping of the number specified in

29、 4.4 and the text specified in 4.5 shall be approximately centered with the field. ANSI/ASAE S584.3 JAN2013 Copyright American Society of Agricultural and Biological Engineers 3 4.7 Letter sizing shall be as follows: Character Height Line Thickness Numbers 75 mm 12 mm “k”, “l”, and “h” 25 mm 5 mm “m

30、”, “I”, and “e” 18 mm 5 mm Figure 1 SIS 5 Materials, Performance and Test Requirements 5.1 Visibility: The symbol shall be visible at night as a circle from all distances between 91 and 30 m (300 and 100 ft) from the rear when directly in front of lawful vehicle low beam headlights. 5.2 Dimensional

31、requirements: The emblem size shall be as shown in Figure 1. 5.3 Performance requirements: Samples shall be exposed to the sun for a minimum test period of 24 months outside in south Florida, or similar natural climatic conditions, at an angle of 45 to horizontal facing upward and south, per ASTM D1

32、014. After exterior durability testing, the material shall show no cracking, crazing, blistering, loss of adhesion, or dimensional change. 5.4 Adhesion: Material shall be applied with a pressure sensitive adhesive having a minimum adhesive value of 3.6 kg/cm (50 oz/in.) width, when pulled at the rat

33、e of 30.5 cm/min (12 in./min) at 180 angle. Adhesion test shall be performed as specified in PSTC-1. 5.5 Color measurement: Shall be per table. Table 1 Chromaticity coordinates for transilluminated signs Chromaticity coordinates of corner points determining the permitted color area for standard illu

34、minated D65 and CIE 2 standard observer Color 1 2 3 4 White x 0.350 0.305 0.295 0.340 y 0.360 0.315 0.325 0.370Black x 0.385 0.300 0.260 0.345 y 0.355 0.270 0.310 0.395ANSI/ASAE S584.3 JAN2013 Copyright American Society of Agricultural and Biological Engineers 4 6 Application and Positioning 6.1 App

35、lication 6.1.1 On all equipment with a specified ground speed greater than 40 km/h (25 mile/h) but less than 65 km/h (40 mile/h): 1) a Speed Identification Symbol (SIS) shall be used, AND 2) a Slow-Moving Vehicle (SMV) emblem shall be used. 6.1.2 On equipment with a specified ground speed equal to o

36、r less than 40 km/h (25 mile/h): 1) a Slow-Moving Vehicle (SMV) emblem shall be used, but 2) a Speed Identification Symbol (SIS) is optional 6.2 Positioning 6.2.1 Rear facing SIS 6.2.1.1 The symbol shall be mounted with the numbers upright in a plane perpendicular to the direction of travel and 10 o

37、n the y and z-axis as shown in Figure 2 when the machine is in transport position. Figure 2 SIS positioning 6.2.1.2 The symbol shall be located 0.6 to 3 m (2 to 10 feet) above the ground measured from the bottom edge of the symbol. 6.2.1.3 The symbol shall be unobscured to the extent that the circul

38、ar shape is readily identifiable both day and night. Preferred mounting is to the right of the centerline of the equipment. 6.2.1.4 Only the SIS on the rearmost machine of combinations of towed equipment need be visible from behind. 6.2.2 Forward facing SIS 6.2.2.1 A forward facing SIS may be used a

39、s a means of informing the operator of the towing machine of the specified ground speed of the towed machine. If used, it shall be mounted on the towed machine in a position that is readable from the operators platform of the towing machine. 6.2.2.2 The dimensions of the forward facing SIS shall be

40、25% to 100% of the dimensions of the rear facing SIS, i.e. 50 to 200 mm overall diameter, with the size of the numbers and letters adjusted proportionally. ANSI/ASAE S584.3 JAN2013 Copyright American Society of Agricultural and Biological Engineers 5 6.2.2.3 Towed Equipment Combinations If used, onl

41、y the forward facing SIS, on the lead towed machine, need be visible from the operators platform. The requirements of clause 7.1 shall apply. 7 Operating Instructions for Towing Vehicles 7.1 The operators manual shall state that when towing equipment combinations, the maximum equipment combination g

42、round speed shall be limited to the lowest specified ground speed of any of the towed machines. 7.2 The operators manual shall state that the maximum travel speed is that specified in the operators manual, SIS, or information sign of towed equipment, or the limit of the road conditions, whichever is the lesser.