ANSI ASA S12.14-1992 American National Standard Methods for the Field Measurement of the Sound Output of Audible Public Warning Devices Installed at Fixed Locations Outdoors《室外固定位置.pdf

《ANSI ASA S12.14-1992 American National Standard Methods for the Field Measurement of the Sound Output of Audible Public Warning Devices Installed at Fixed Locations Outdoors《室外固定位置.pdf》由会员分享，可在线阅读，更多相关《ANSI ASA S12.14-1992 American National Standard Methods for the Field Measurement of the Sound Output of Audible Public Warning Devices Installed at Fixed Locations Outdoors《室外固定位置.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI/ASA S12.14-1992 (Formerly ANSI S12.14-1992) (ASA 101-1992) AMERICAN NATIONAL STANDARDMethods for the Field Measurement of the Sound Output of Audible Public Warning Devices Installed at Fixed Locations Outdoors Accredited Standards Committee S12, NoiseStandards Secretariat Acoustical Society o

2、f America35 Pinelawn Road, Suite 114 EMelville, NY 11747-3177ANSI/ASA S12.14-1992 (Formerly ANSI S12.14-1992)(ASA 101-1992)Reaffirmed by ANSI July 17, 2002 Reaffirmed by ANSI July 29, 1997 Reaffirmed by ANSI Reaffirmed by ANSISeptember 11, 2007 November 30, 2012The American National Standards Instit

3、ute, Inc. (ANSI) is the national coordinator of voluntary standards development and the clearinghouse in the U.S.A. for information on national and international standards. The Acoustical Society of America (ASA) is an organization of scientists and engineers formed in 1929 to increase and diffuse t

4、he knowledge of acoustics and to promote its practical applications. ANSI/ASA S12.14-1992 (Formerly ANSI S12.14-1992) (ASA 101-1992) AMERICAN NATIONAL STANDARD Methods for the Field Measurement of the Sound Output of Audible Public Warning Devices Installed at Fixed Locations Outdoors Secretariat Ac

5、oustical Society of America Approved 12 March 1992 American National Standards Institute, Inc. Abstract This American National Standard describes relatively simple procedures for measuring and reporting certain properties of sounds produced by audible public warning devices. Methods are given for th

6、e measurement of the C-weighted sound level and for determining the one-third octave band containing the fundamental frequency of tonal warning sounds produced by audible public warning devices at a distance of 100 ft (30.5 m) from the device and at the mounted height of the device. A method is also

7、 given for measuring the maximum level of the sound from a warning sound source at the heads of bystanders on the ground. These methods may be used by manufacturers to specify, in part, the sound produced by their products, by customers to verify compliance with pertinent sound output specifications, and by warning system designers to estimate warning sound coverage.