ANSI ARI ASHRAE ISO 13256-1-1998 Water-Source Heat Pumps - Testing and Rating for Performance Part 1 - Water-to-Air and Brine-to-Air Heat Pumps《水源热力泵.性能试验和额定值测量.第1部分 水-空气和盐水-空气热力泵》.pdf
《ANSI ARI ASHRAE ISO 13256-1-1998 Water-Source Heat Pumps - Testing and Rating for Performance Part 1 - Water-to-Air and Brine-to-Air Heat Pumps《水源热力泵.性能试验和额定值测量.第1部分 水-空气和盐水-空气热力泵》.pdf》由会员分享,可在线阅读,更多相关《ANSI ARI ASHRAE ISO 13256-1-1998 Water-Source Heat Pumps - Testing and Rating for Performance Part 1 - Water-to-Air and Brine-to-Air Heat Pumps《水源热力泵.性能试验和额定值测量.第1部分 水-空气和盐水-空气热力泵》.pdf(26页珍藏版)》请在麦多课文档分享上搜索。
1、ASHRAE STANDARDAmerican Society of Heating, Refrigeratingand Air-Conditioning Engineers, Inc.1791 Tullie Circle NE, Atlanta, GA 30329www.ashrae.orgWater-source heat pumpstesting and rating for performancePart 1: Water-to-airand brine-to-air heat pumpsANSI/ARI/ASHRAE ISO Standard 13256-1:1998Approved
2、 by ARI on August 10, 2001; by the ASHRAE Standards Committee on March 20, 2002; by the ASHRAEBoard of Directors on July 3, 2003; and by the American National Standards Institute on August 15, 2003.ASHRAE Standards are scheduled to be updated on a five-year cycle; the date following the standard num
3、ber isthe year of ASHRAE Board of Directors approval. The latest copies may be purchased from ASHRAE CustomerService, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 404-321-5478. Tele-phone: 404-636-8400 (worldwide) or toll free 1-800-527-4723 (for orders in U.S. and
4、Canada). ISO 1998 ASHRAE, ARI 2005ISSN 1041-2336When addenda or interpretations to this standard have been approved, they can be downloaded free of chargefrom the ASHRAE Web site at http:/www.ashrae.org/template/TechnologyLinkLanding/category/1631 orhttp:/www.ashrae.org/template/TechnologyLinkLandin
5、g/category/1686.Copyright ASHRAE Provided by IHS under license with ASHRAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIAL NOTEThis American National Standard (ANS) is a national voluntary consensus standard developed under the auspices of the American Socie
6、tyof Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). Consensus is defined by the American National Standards Institute (ANSI),of which ASHRAE is a member and which has approved this standard as an ANS, as “substantial agreement reached by directly and materiallyaffected interest cate
7、gories. This signifies the concurrence of more than a simple majority, but not necessarily unanimity. Consensus requiresthat all views and objections be considered, and that an effort be made toward their resolution.” Compliance with this standard is voluntary untiland unless a legal jurisdiction ma
8、kes compliance mandatory through legislation.ASHRAE obtains consensus through participation of its national and international members, associated societies, and public review.ASHRAE Standards are prepared by a Project Committee appointed specifically for the purpose of writing the Standard. The Proj
9、ectCommittee Chair and Vice-Chair must be members of ASHRAE; while other committee members may or may not be ASHRAE members, all mustbe technically qualified in the subject area of the Standard. Every effort is made to balance the concerned interests on all Project Committees. The Manager of Standar
10、ds of ASHRAE should be contacted for:a. interpretation of the contents of this Standard,b. participation in the next review of the Standard,c. offering constructive criticism for improving the Standard,d. permission to reprint portions of the Standard.ARI SAFETY DISCLAIMERARI does not set safety sta
11、ndards and does not certify or guarantee the safety of any products, components or systems designed,rested, rated, installed or operated in accordance with this standard/guideline. It is strongly recommended that products be designed,constructed, assembled, installed and operated in accordance with
12、nationally recognized safety standards and code requirementsappropriate for products covered by this standard/guideline.ARI uses its best efforsts to develop standards/guidelines employing state-of-the-art and accepted industry practices. ARI does notcertify or guarantee that any tests conducted und
13、er its standards/guidelines will be non-hazardous or free from risk.ASHRAE DISCLAIMERASHRAE uses its best efforts to promulgate Standards and Guidelines for the benefit of the public in light of available informationand accepted industry practices. However, ASHRAE does not guarantee, certify, or ass
14、ure the safety or performance of anyproducts, components, or systems tested, installed, or operated in accordance with ASHRAEs Standards or Guidelines or that anytests conducted under its Standards or Guidelines will be nonhazardous or free from risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDS
15、ASHRAE Standards and Guidelines are established to assist industry and the public by offering a uniform method of testing for rating purposes, by suggesting safe practices in designing and installing equipment, by providing proper definitions of this equipment, and by providing other information tha
16、t may serve to guide the industry. The creation of ASHRAE Standards and Guidelines is determined by the need for them, and conformance to them is completely voluntary.In referring to this Standard or Guideline and in marking of equipment and in advertising, no claim shall be made, either statedor im
17、plied, that the product has been approved by ASHRAE.Copyright ASHRAE Provided by IHS under license with ASHRAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CONTENTSANSI/ARI/ASHRAE ISO 13256-1Water-source heat pumpsTesting and rating for performancePart 1: Water-t
18、o-air and brine-to-air heat pumpsThis standard is an identical national adoption of the ISO standard.SECTION PAGEForeword. 2Introduction . 21 Scope . 22 Normative Reference 23 Definitions. 24 Rating and Test Conditions. 35 Performance Requirements 56 Test Methods 87 Marking Provisions . 98 Publicati
19、on of Ratings. 10Normative Annex A: Test Procedures . 10Normative Annex B: Indoor Air-Enthalpy Test Method 10Normative Annex C: Liquid Enthalpy Test Method 11Normative Annex D: Airflow Measurement 11Normative Annex E: Calorimeter Room Test Method . 11Informative Annex F: Instrumentation and Measurem
20、ents. 14Informative Annex G: Symbols Used in Annexes . 21Informative Annex H: Bibliography 22 ISO 1998 ASHRAE 2005 ARI 2005American Society of Heating,International Organization for Standardization Refrigerating and Air-Conditioning Engineers, Inc. Air-Conditioning and Refrigeration Institute1, rue
21、de Varemb, Case postale 56 1791 Tullie Circle NE 4100 N. Fairfax Drive, Suite 200CH-1211 Geneva 20, Switzerland Atlanta, GA 30329 Arlington, VA 22203www.iso.org www.ashrae.org www.ari.orgAll rights reserved. All rights reserved. All rights reserved.Copyright ASHRAE Provided by IHS under license with
22、 ASHRAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright ASHRAE Provided by IHS under license with ASHRAENot for ResaleNo reproduction or networking permitted without license from IHSForewordISO (the International Organization for Standardization)is a world
23、wide federation of national standards bodies (ISOmember bodies). The work of preparing International Stan-dards is normally carried out through ISO technical commit-tees. Each member body interested in a subject for which atechnical committee has been established has the right to berepresented on th
24、at committee. International organizations,governmental and non-governmental, in liaison with ISO, alsotake part in the work. ISO collaborates closely with the Inter-national Electrotechnical Commission (IEC) on all matters ofelectrotechnical standardization.Draft International Standards adopted by t
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ANSIARIASHRAEISO1325611998WATERSOURCEHEATPUMPSTESTINGANDRATINGFORPERFORMANCEPART1WATERTOAIRANDBRINETOAIRHEATPUMPS

链接地址:http://www.mydoc123.com/p-431088.html