ANSI American Society of Safety Engineers Z359.15-2014 Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest Systems.pdf

《ANSI American Society of Safety Engineers Z359.15-2014 Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest Systems.pdf》由会员分享，可在线阅读，更多相关《ANSI American Society of Safety Engineers Z359.15-2014 Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest Systems.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、AMERICAN NATIONAL STANDARDANSI/ASSE Z359.15-2014Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest SystemsPart of the Fall Protection CodeApproved American National StandardAMERICAN SOCIETY OF SAFETY ENGINEERSMERICAN SOCIETY OFAFETY ENGINEERSThe information a

2、nd materials contained in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited Z359 Committee or individual committee members accept no legal responsibility for the correctness or com

3、-pleteness of this material or its application to specific factual situations. By publication of this standard, ASSE or the Z359 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property.ANSIANSI/ASSE Z359.15 2014American

4、 National StandardSafety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest SystemsSecretariatAmerican Society of Safety Engineers1800 East Oakton StreetDes Plaines, Illinois 60018-2187Approved August 25, 2014American National Standards Institute, Inc. Published Feb

5、ruary 2015 by:American Society of Safety Engineers1800 East Oakton StreetDes Plaines, Illinois 60018-2187(847) 699-2929 www.asse.orgCopyright 2015 by American Society of Safety EngineersAll Rights Reserved.No part of this publication may be reproducedin any form, in an electronic retrieval system or

6、otherwise, without the prior written permissionof the publisher.Printed in the United States of AmericaApproval of an American National Standard requires verification by ANSI that the require-ments for due process, consensus, and other criteria for approval have been met by the standards developer.

7、Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views a

8、nd objections be consid-ered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect pre-clude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purcha

9、sing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American National Standard. More-over, no person shall have the right or authority to issu

10、e an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be r

11、evised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the

12、American National Standards Institute.AmericanNational StandardForeword (This Foreword is not a part of American National Standard Z359.15-2014.)This standard, national in scope, was developed by an Accredited Standards Committee functioning under the procedures of the American National Standards In

13、stitute, with the American Society of Safety Engineers (ASSE) as secretariat.It is intended that every employer whose operations fall within the scope and purpose of the standard will adopt the guidelines and requirements detailed in this standard.The need for this standards activity grew out of the

14、 continuing development of a series of fall protection-relat-ed standards. The focus is to tie the elements of those standards together and provide the tools with which employers may develop the programs that incorporate those elements. This standard also brings together the administrative requireme

15、nts of those fall protection standards. It should be noted, as in all Z359-series standards, that this standard applies to occupational activities. It does not apply to sports activities such as mountaineering.Neither the standards committee, nor the secretariat, states that this standard is perfect

16、 or in its ultimate form. It is recognized that new developments are to be expected, and that revisions of the standard will be necessary as the state-of-the-art progresses and further experience is gained. It is felt, however, that uniform guidelines for fall protection programs are very much neede

17、d and that the standard in its present form provides for the minimum criteria necessary to develop and implement a comprehensive managed fall protection program.The Z359 Committee acknowledges the critical role of design in influencing the use of proper fall protection equipment. Designs which elimi

18、nate fall hazards through the proper application of the hierarchy of safety controls are the preferred method for fall protection. Design deficiencies often increase the risk for employ-ees who may be exposed to fall hazards: examples are (1) lack of rail systems to prevent falls from machines, equi

19、pment and structures; (2) failure to provide engineered anchorages where use of personal fall arrest systems are anticipated; (3) no provision for safe access to elevated work areas; (4) installation of machines or equipment at heights, rather than floor/ground level to preclude access to elevated a

20、reas; (5) failure to plan for the use of travel restriction or work positioning devices. To that end, this series of standards also provides guidance for design considerations for new buildings and facilities.Basic fall safety principles have been incorporated into these standards, including hazard

21、survey, hazard elimination and control, and education and training. The primary intent is to ensure a proactive approach to fall protection. However, the reactive process of accident investigation is also addressed to ensure that adequate attention is given to causation of falls.The Z359 Committee s

22、olicits public input that may suggest the need for revisions to this standard. Such input should be sent to the Secretariat, ASC Z359, American Society of Safety Engineers, 1800 E. Oakton Street, Des Plaines, IL 60018-2187.This standard was developed and approved for submittal to ANSI by the America

23、n National Standards Committee on Standards for Fall Protection, Z359. Committee approval of the standard does not necessar-ily imply that all committee members voted for its approval. At the time it approved this standard, the Z359 Committee had the following members:Name of RepresentativeRaymond M

24、annMichael CameronLen BradleyJubal D. Hamernik, Ph.D., P.E.John Stephen Frost, CSPPreston AndersonBradley S. McGillChuck OrebaughJoey R. Junio, P.E.James RulloDeForest CanfieldJ. Thomas Wolner, P.E.Judd PernerCraig BerkenmeierJoshua Ockmond, CSPJim PoageDan RossiKarl GuthrieEric PatrickDelisa Calhou

25、nErik ArendallJ. Nigel Ellis, Ph.D., P.E., CSP, CPEJohn T. Whitty, P.E.Dustin HawkinsPaul BrevesHugh ArmstrongAmber SvobodaKen MahnickKyle SullivanRandall WingfieldDave LoughTimothy HealeyJerry Kucharski, CFPSGreg Small, P.Eng., M.Eng.Doug MyetteBradley RohlfChris HuberDan ShippDavid H. Pate, CUSADa

26、vid BaldwinMark WinchesterOrganization Represented 3M American AirlinesAmerican Society of Safety EngineersBashlin Industries, Inc.Boeing CompanyBuckingham Mfg. Co., Inc.Capital Safety GroupChevronClear Channel OutdoorClimbTech LLCElk River, Inc.Ellis Fall Safety Solutions, LLCFallTechFlexible Lifel

27、ine SystemsGeneral MotorsGravitec Systems, Inc.Hartford Steam Boiler Inspection Year of manufacture; Manufacturers name or logo; Capacity rating; Serial number; Standard number “Z359.15”; Warning to follow the manufacturers instructions included with the equipment at time of shipment from the manufa

28、cturer; The direction of use of the fall arrester on its sin-gle anchor lifeline; The proper size(s) and type(s) of single anchor lifeline with which the fall arrester is intended to be used; Warning to use only manufacturer approved lan-yards according to instructions.5.2.2 Single anchor lifelines

29、shall be marked to identify: The fiber used in the material of construction; The diameter of lifeline; The length of the lifeline; The model of fall arrester(s) acceptable for use with the lifeline; The need to avoid contact with sharp edges and abrasive surfaces; Standard number “Z359.15”; Serial n

30、umber; Part number or model designation; Year of manufacture; Manufacturers name or logo.5.2.3 Integral lanyards shall be marked to identify:ANSI/ASSE Z359.15-2014 American National Standard Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest Systems22Approved

31、 American National StandardAMERICAN SOCIETY OFSAFETY ENGINEERS The material used in lanyard construction; The length of the lanyard; The need to avoid contact with sharp edges and abrasive surfaces; The need to make only compatible connections; The average arrest force, maximum free fall dis-tance,

32、maximum deployment distance and ca-pacity; Standard number “Z359.15”; Serial number; Part number or model designation; Year of manufacture; Manufacturers name or logo.5.3 General Instruction Requirements.5.3.1 Instructions shall be provided to the user, printed in English and affixed to the equipmen

33、t at the time of shipment from the manufacturer.5.3.2 Instructions shall contain the following infor-mation: A statement that the manufacturers instructions shall be provided to users; Manufacturers name, address and telephone number; Manufacturers part number or model designa-tion for the equipment

34、; Intended use and purpose of the equipment; Proper method of use and limitations on use of the equipment; Illustrations showing locations of markings on the equipment; Reproduction of printed information on all mark-ings; Inspection procedures required to assure the equipment is in serviceable cond

35、ition and oper-ating correctly; Anchorage requirements; Criteria for discarding and retiring equipment which fails inspection; Procedures for cleaning, maintenance and stor-age; A reference chart that indicates the clearance requirements of the system according to the fall arrester, energy absorbing

36、 lanyard and elonga-tion characteristics of the lifeline.23Approved American National StandardANSI/ASSE Z359.15-2014 American National Standard Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest SystemsAMERICAN SOCIETY OFSAFETY ENGINEERS5.3.3 Instructions sha

37、ll require that only the equip-ment manufacturer, or persons or entities autho-rized in writing by the manufacturer, shall make repairs to equipment.5.3.4 Instructions shall require the user to remove equipment from field service if it has been subject-ed to the forces of arresting a fall.5.3.5 Inst

38、ructions shall require the user to have a rescue plan and the means at hand to implement it when using the equipment.5.3.6 Instructions shall provide warnings regarding: Altering the equipment; Misusing the equipment; Using combinations of fall arresters, lanyards, lifelines, which may affect or int

39、erfere with the safe function of each other; Exposing the equipment to chemicals which may produce a harmful effect and to consult the man-ufacturer in cases of doubt; Using the equipment around moving machinery and electrical hazards; Using the equipment near sharp edges and abra-sive surfaces, as

40、well as the need for abrasion protection; Other warnings deemed necessary by the manu-facturer.5.4 Specific Instruction Requirements.5.4.1 Fall Arresters. In addition to the require-ments in 5.3, instructions for fall arresters shall in-clude: Acceptable lanyards, by make and model, for use with the

41、 fall arrester; How to attach the lanyard to the fall arrester; The maximum allowable free fall distance; Proper method of connection to the full body har-ness (frontal and/or dorsal connection); Warnings that the fall arrester shall be attached to no more than one lifeline; Warnings that the fall a

42、rrester shall be attached to no more than one user; Warnings to avoid exposure to physical and chemical hazards which the fall arrester is not designed to withstand;ANSI/ASSE Z359.15-2014 American National Standard Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall

43、Arrest Systems24Approved American National StandardAMERICAN SOCIETY OFSAFETY ENGINEERS Instructions to not manipulate or hold the fall ar-rester body or lever, but to move the fall arrester up/down by the lanyard; The maximum arrest distance and clearance requirement when dynamically tested in accor

44、-dance with the requirements of this standard; The proper size, construction and type of single anchor lifelines with which the fall arrester is in-tended to be used; Warnings to emphasize that anchoring be above the user to prevent pendulum fall; Warnings to emphasize use is not suitable when the u

45、ser is positioned on an unstable surface, fine grain material or particulate solids such as sand or coal; Information for determining total fall distance in-cluding lifeline elongation; Capacity range of 130 to 310 pounds; Standard number “Z359.15”.5.4.2 Single Anchor Lifelines. In addition to the r

46、equirements in 5.3, instructions for single anchor lifelines shall include: The material used in the single anchor lifeline con-struction; Proper method of coupling the single anchor life-line to anchorage connectors and anchorages with which it is intended to be used and to adja-cent components of

47、the system; The minimum static strength; Warnings that only one fall arrester be attached to the single anchor lifeline; Warnings that only one user can be attached to the single anchor lifeline; Warnings to avoid exposure to physical and chemical hazards which the single anchor lifeline is not desi

48、gned to withstand; Warnings using the equipment near sharp edges and abrasive surfaces and the need for abrasion protection; Warnings to avoid swing fall hazards encountered when the anchorage is not directly overhead; The proper fall arrester, by make and model, with which the single anchor lifelin

49、e is intended to be used; The percentage of stretch of the lifeline when loaded to 900 pounds (4 kN); Capacity range of 130 to 310 pounds; Lifeline melting point;25Approved American National StandardANSI/ASSE Z359.15-2014 American National Standard Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest SystemsAMERICAN SOCIETY OFSAFETY ENGINEERS Standard number “Z359.15”; If permissible by the manufacturer, specific direc-tions how to cut