ANSI AIIM MS54-1993 Graphic Symbols for Controls on Document Imaging Equipment《文档成像设备上控制装置的图形符号》.pdf

《ANSI AIIM MS54-1993 Graphic Symbols for Controls on Document Imaging Equipment《文档成像设备上控制装置的图形符号》.pdf》由会员分享，可在线阅读，更多相关《ANSI AIIM MS54-1993 Graphic Symbols for Controls on Document Imaging Equipment《文档成像设备上控制装置的图形符号》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、a AIIfl MS54 93 1012348 0500304 249 m ANSVAIIM MS54-1993 Graphic Symbols for Controls on Document Imaging Equipment St landard Approved As iEEEz9 May 14, 1993 (3 k Association for Information and Image Management 1100 Wayne Avenue, Suite 1100 Silver Spring, Maryland 2091 O Telephone 301 1587-0202 AI

2、IM MS54 93 1012344 0500305 185 W ANSI/AIIM MS54-1993 i Standard for Information and Image Management - Graphic Symbols for Controls On Document Imaging Equipment Association for Information and Image Management This standard contains symbols to be used on operator panels and controls of micrographic

3、s and other document imaging equipment to designate features, e.g., onloff (power). AIIM MS54 93 H LOL2348 O500306 OLL = Contents Foreword i 1 Scope and purpose . 1 2 Normative references . 1 3 Collection of symbols and definitions . 1 Foreword (This foreword is not a part of the Ameri- can National

4、 Standard for Information and Image Management - Graphic Symbols for Controls On Docu- ment Imaging Equipment - ANSI/AIIM MS54-1993.) This standard contains a collection of symbols recom- mended for use on micrographics (and other types of document imaging equipment) to show equipment func- tions. M

5、any of the symbols are from existing interna- tional standards. The origins of these symbols are specified in this standard. If the equipment function re- quired a new symbol, it was generated by the AIIM Stan- dards Committee, C8, Imaging Equipment. The definitions for the symbols are also included

6、 in this standard. Symbol numbers 6 and 23 have an “a” and “b” symbol, with “a” being the preferred. Suggestions for improvements of this standard are wel- come. They should be sent to the Chair, AIIM Standards Board, Association for Information and Image Manage- ment, 1100 Wayne Avenue, Suite 1100,

7、 Silver Spring, Maryland 20910-5699. At the time it approved this standard, the AIIM Stan- dards Board had the following members: 0 Marilyn E. Courtot, Chair Thomas C. Bagg Thomas E. Berney Loretta DAgnolo Bruce Evans Bruce A. Holroyd Donald Klosterboer E. Brien Lewis Alan S. Linden Charles A. Plesu

8、ms L. Don Prince George Thoma Charles E Touchton Association for Information and Image Management Standards and Technology National Institute of Consultant American Express Company 3M Company Eastman Kodak Company Anacomp, Inc. I-NET, Inc. Wang Laboratories United States Automotive Bell and Howell N

9、ational Library of IBM Corporation Association Company Medicine Herbert J. White, II Genealogical Society of Utah O Name of ReDresentative Roy Pierce, Chair Michael J. Badal Thomas Bagg Eric Erickson Gareth Evans Steve Gilheany Bohdan Kantor Gene Koppensteiner E. Brien Lewis James Medek Paul Montgom

10、ery Scott Moyer Robert Novak John B. Pearson Brent Reber James Snyder Herbert J. White II Eberhard Zieran Organization Represented Xerox Corporation Badal Associates National Institute of Standards and Technology Utah Systems, Inc. Inc. Genealogical Society of Engineering Document International Imag

11、ing, Library of Congress Bell IS0 7000 (symbol 0719) Level of roll material supply Symbol Number 4 Name: Clear Origin: ISO/IEC 6329 (reference number 2.7.18) e Clear system of programmed data C Symbol Number 2 Symbol Number 5 Name: Add Sheet PapedMaterial Origin: ISO/IEC 6329 (reference number 2.9.1

12、); IS0 7000 (symbol 0718) Name: Color Copy Origin: IS0 7000 (symbol 0488) Color copies can be produced Level of sheet material supply Symbol Number 3 Symbol Number 6a Name: Decrement of Reel” (IS0 7000) and “Beginning of Origin: AIIM Standards Committee, C8, imaging Roll” (IS0 9878) Equipment Step b

13、y step decrease in adjustment Name: Beginning of Supply - named “Beginning Origin: IS0 7000 (symbol 0076); IS0 9878 Beginning of microjlm supply roll 2 AIIM MS54 93 m LOL2348 0500309 820 m i Symbol Number 6b Name: Decrement Origin: AIIM Standards Committee, C8, Imaging Equipment Continuous decrease

14、in adjustment Symbol Number 7 Name: Document Counter Origin: ISOIIEC 6329 (reference number 2.7.6); IS0 7000 (symbol 0695) Number of cycles completed Symbol Number 8 Name: Document Feed Face Down Origin: AIIM Standards Committee, C8, Imaging Document placement in face down position Equipment c4 3 Sy

15、mbol Number 9 Name: Document Feed Face Up Origin: AIIM Standards Committee, C8, Imaging Equipment Document placement in face up position o Symbol Number 10 Name: Document/Film Jam Origin: ISO/IEC 6329 (reference number 2.8.5); IS0 7000 (symbol 0713) (Note: Indicate if the jam is in the original docu

16、- ment path or in the supply path.) Placement of this symbol determines paper orjlm jam Symbol Number 11 Name: End of Supply - named “End of Reel” (IS0 Origin: IS0 7000 (symbol 0075) and IS0 9878 (sym- 7000) and “End of Roll” (IS0 9878) bol 0075) End of microfilm copy supply AIIH 54 93 m 02348 OSOOL

17、O 542 m Symbol Number 12 Symbol Number 15 Name: Enlargement Origin: ISO/IEC 6329 (reference number 2.5.5); IS0 Name: Exposure Setting, Manua Origin: ISO/IEC 6329 (reference numbers 2.5.1 and 2.5.2); IS0 7000 (symbol 0677 and 0678); 1EC417 (symbols 5004 and 5057) 7000 (symbol 0680) 0 Enlargement in s

18、ize of copy from original Manual exposure control Symbol Number 13 Symbol Number 16 Name: Exposure Adjustment Name: Fast-Run Origin: IEC417 (symbols 5004/5056); ISO/IEC 6329 Origin: ISO/IEC417 (symbol 5 108) (reference number 2.4.11) Adjustment of exposure setting Faster speed and direction . -iD Sy

19、mbol Number 14 Symbol Number 17 Name: Fast-Stop Origin: ISO/IEC 6329 (reference number 2.2.3); Name: Exposure Setting, Automatic - named “Light- er and Darker Copy” (IS0 7000) Origin: ISO/IEC 6329 (reference numbers 2.5.1, 2.5.2, and 2.3.3); IS0 7000 (symbols 0677, 0017, and 0678), IEC417 (symbol 50

20、57) IEC417 (symbol 5178) Immediate, complete stop of system, i.e., system turns off Automatic exposure control 4 AIIM MS54 93 W 3032348 0500333 489 Symbol Number 18 Name: Foot Switch Origin: IEC417 (symbol 51 14) Remote control switch 2 Symbol Number 19 Name: Fuse Origin: IEC417 (symbol 5016) Locati

21、on of fuse Symbol Number 21 Name: Image Mark Level/Blip Size (Book, Origin: AIIM Standards Committee, C8, Imaging Chapter, Page) Equipment Choices available for an image marking system NO BLIP SMALL MEDIUM LARGE Symbol Number 22 Name: Image Rotation Origin: IS0 7000 (symbols 0440 and 0941) (Note: If

22、 image rotation is in one direction, use only one arrow for the appropriate direction. Similarly, if image rotation is in two directions, use both arrows.) Capability of image rotation in both directions Symbol Number 20 Symbol Number 23a Name: Hot Surface Name: Increment Origin: IEC417 (symbol 5237

23、); IS0 7000 (symbol To caution operator of a hot surface Origin: AIIM Standards Committee, C8, Imaging 0637) Equipment Step by step adjustment AIIM US54 93 m 1012348 0500332 315 m Symbol Number 23b Name: Increment Origin: AIIM Standards Committee, C8, Imaging Equipment Continuous increase in adjustm

24、ent Symbol Number 26 Name: Normal Speed (Direction) Origin: IEC417 (symbol 5107) Normal speed and direction Symbol Number 24 Symbol Number 27 Name: Interrupt Name: Off (Power) Origin: ISO/IEC 6329 (reference number 2.10. i); IS0 Origin: IEC417 (symbol 5008); ISO/IEC 6329 7000 (symbol 1131) (referenc

25、e number 2.1.2) Immediate stop of system, temporary interrupt of operations, i. e., system does not turn completely off Symbol Number 25 Name: Master Alignment (Image Shift) Origin: IS0 7000 (symbol 0661); ISO/IEC 6329 (reference number 2.3.8) Alignment in horizontal or vertical direction Turn main

26、electric power off O Symbol Number 28 Name: On (Power) Origin: IEC417 (symbol 5007); ISO/IEC 6329 (reference number 2.1.1) Turn main electric power on 6 AIIM MS54 93 1012348 0500313 251 Symbol Number 29 Name: On/Off (hsh-Push Power) Origin: IEC417 (symbol 5010); ISO/IEC 6329 (reference number 2.1.3)

27、 Turn main electric power on or off o Symbol Number 30 Name: Polarity (Negative) Origin: AIIM Standards Committee, C8, Imaging Equipment White characters on dark background; sign maintaining Symbol Number 31 Name: Polarity (Positive) Origin: AIIM Standards Committee, C8, Imaging Equipment Dark chara

28、cters on white background; sign reversing Symbol Number 32 Name: Print Origin: AIIM Standards Committee, C8, Imaging Equipment Start of print cycle Symbol Number 33 Name: Reduction Origin: ISOIIEC 6329 (reference number 2.5.4); IS0 7000 (symbol 0679) Reduction in size Symbol Number 34 Name: Safety I

29、nterlock Origin: ISO/TC 17 1/WG6 N 12 1 System inoperable unless doorscovers are in operating position AIIM MS54 93 1012348 0500314 198 Symbol Number 35 Name: Stand-by Origin: IEC417 (symbol 5009); ISO/IEC 6329 (reference number 2.3.4) Operating systems are in stand-by position; ready for immediate

30、use Symbol Number 36 Name: Start Origin: IEC417 (symbol 5104); ISOIEC 6329 (reference number 2.2. I) Start of the system/cyce Symbol Number 37 Name: Stop Origin: IEC417 (symbol 51 10); ISO/IEC 6329 Stop of system at the end of the present cycle (reference number 2.2.2) 8 ANWAIIM MS54-1993 by Association for Information and Image Management 1100 Wayne Avenue, Suite 1100 Silver Spring, MD 20910 Tel: 301/587-8202 Fax: 301 1587-271 1 ISBN 0-89258-273-1 Printed in the United States of America