AECMA PREN 3375-002-2005 Aerospace series Cable electrical for digital data transmission Part 002 General Edition P 1《航空航天系列 数字数据传输用电机电缆.第002部分 技术规格》.pdf

《AECMA PREN 3375-002-2005 Aerospace series Cable electrical for digital data transmission Part 002 General Edition P 1《航空航天系列 数字数据传输用电机电缆.第002部分 技术规格》.pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 3375-002-2005 Aerospace series Cable electrical for digital data transmission Part 002 General Edition P 1《航空航天系列 数字数据传输用电机电缆.第002部分 技术规格》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、ASD STANDARD NORME ASD ASD NORM prEN 3375-002 Edition P 1 October 2005 PUBLISHED BY THE AEROSPACE AND DEFENSE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8111 - www.asd-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION Ae

2、rospace series Cable, electrical, for digital data transmission Part 002: General Srie arospatiale Cbles lectriques pour transmission de donnes numriques Partie 002 : Gnralits Luft- und Raumfahrt Elektrische Leitungen fr Digitaldatenbertragungen Teil 002: Allgemeines This “Aerospace Series“ Prestand

3、ard has been drawn up under the responsibility of ASD-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subseq

4、uent to the publication of this pre-standard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitt

5、ed as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any

6、 national standards conflicting with the EN. Edition approved for publication 31 October 2005 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2005 by ASD-STAN Copyright Association Europeene des Constructeurs de Materiel Aerospatial Pro

7、vided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3375-002:20052 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with

8、 the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope. 3 2 Normative references 3 3 Terms and definitions . 4 4 List of product standards . 4 5 Materials and construction . 4 5.1 Materials . 4 5.2 Construction 4

9、 5.3 Colour coding. 4 6 Identification and marking. 5 7 Technical specification 5 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3375-002:20053 1

10、 Scope This standard specifies the list of product standards and common characteristics of signal data transmission electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between 65 C and 150 C or 200 C or 260 C (as specified in product standards). 2 Norm

11、ative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper

12、 or copper alloy conductors for electrical cables Product standard. EN 3375-001, Aerospace series Cable, electrical, for digital data transmission Part 001: Technical specification. 1)EN 3375-003, Aerospace series Cable, electrical, for digital data transmission Part 003: Single braid 77 Ohms Code K

13、G Product standard. 2)EN 3375-004, Aerospace series Cable, electrical, for digital data transmission Part 004: Double braid 77 Ohms Code WJ Product standard. 2)EN 3375-005, Aerospace series Cable, electrical, for digital data transmission Part 005: Double braid + metallic layer 77 Ohms Code WV Produ

14、ct standard. 2)EN 3375-006, Aerospace series Cable, electrical, for digital data transmission Part 006: Single braid 78 Ohms Code XM Product standard. 2)EN 3375-007, Aerospace series Cable, electrical, for digital data transmission Part 007: Double braid 77 Ohms Code WW Product standard. 2)EN 3375-0

15、08, Aerospace series Cable, electrical, for digital data transmission Part 008: Single braid Star Quad 100 Ohms Code KD Product standard. 2)EN 3375-009, Aerospace series Cable, electrical, for digital data transmission Part 009: Single braid CAN Bus 120 Ohms Code WX Product standard. 2)EN 3475-100,

16、Aerospace series Cables, electrical, aircraft use Test methods Part 100: General. EN 3838, Aerospace series Requirements and tests on user-applied markings on aircraft electrical cables. 1)EN 4434, Aerospace series Copper or copper alloy lightweight conductors for electrical cables Product standard

17、(Normal and tight tolerances). 1)TR 6058, Aerospace series Cable code identification list. 3)1) Published as AECMA Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this standard. 3) Published as AECMA Technical Report at the date of publication

18、 of this standard. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3375-002:20054 3 Terms and definitions For the purposes of this document, the t

19、erms and definitions given in EN 3475-100 apply. 4 List of product standards EN 3375-003, Aerospace series Cable, electrical, for digital data transmission Part 003: Single braid 77 Ohms Code KG Product standard. EN 3375-004, Aerospace series Cable, electrical, for digital data transmission Part 004

20、: Double braid 77 Ohms Code WJ Product standard. EN 3375-005, Aerospace series Cable, electrical, for digital data transmission Part 005: Double braid + metallic layer 77 Ohms Code WV Product standard. EN 3375-006, Aerospace series Cable, electrical, for digital data transmission Part 006: Single br

21、aid 78 Ohms Code XM Product standard. EN 3375-007, Aerospace series Cable, electrical, for digital data transmission Part 007: Double braid 77 Ohms Code WW Product standard. EN 3375-008, Aerospace series Cable, electrical, for digital data transmission Part 008: Single braid Star Quad 100 Ohms Code

22、KD Product standard. EN 3375-009, Aerospace series Cable, electrical, for digital data transmission Part 009: Single braid CAN Bus 120 Ohms Code WX Product standard. 5 Materials and construction 5.1 Materials The cable conductors shall be made of copper or copper alloy and silver plated according to

23、 EN 2083 or EN 4434 code C (except otherwise specified in the product standard). 5.2 Construction Numbers of cores, screen description and jacket definition: See product standard. 5.3 Colour coding Core : white and blue Jacket : white (except otherwise specified in the product standard). Copyright A

24、ssociation Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3375-002:20056 Identification and marking The identification and marking of cables by the manufacturer shall

25、be in accordance with EN 3375-001. As the designation, required for orders, is generally too long, for use in electrical drawings a shorter cross designation (without colour information) is given by the AECMA TR 6058 plus the corresponding nearest AWG (gauge code). EXAMPLE Designation: EN3375-004C01

26、 Cross reference: WJ C 24 This shorter designation is used for identification and marking as in the following example: EN WJ C 24 FR F 05 Reference to EN standard cable 5 4 spaces 4)Type code Specific code Gauge code Manufacturer country code Manufacturer code Year of manufacturing EN WJ C 24 FRF05

27、60 mm max.(300 50) mmEN WJ C 24 FRF05 The marking is applied to the outer jacket or on a tape beneath a transparent outer jacket. The cables shall be capable of being printed with the user-applied markings according to EN 3838 when applicable in the product standard. 7 Technical specification See EN 3375-001. 4) Spaces are mandatory, with a possible exception for the second one. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-