AECMA PREN 3218-006-1995 Aerospace Series Connector Rectangular with Metallic Shells and Screw-Locking Part 006 Receptacle with Non-Removable Size 22 Solder Contacts Product Standa.pdf

《AECMA PREN 3218-006-1995 Aerospace Series Connector Rectangular with Metallic Shells and Screw-Locking Part 006 Receptacle with Non-Removable Size 22 Solder Contacts Product Standa.pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 3218-006-1995 Aerospace Series Connector Rectangular with Metallic Shells and Screw-Locking Part 006 Receptacle with Non-Removable Size 22 Solder Contacts Product Standa.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 AECMA PRENx3218- 006 95 = 10L23LL 0008722 590 AECMA STANDARD NORME AECMA AECMA NORM prEN 321 8-006 Edition P 1 March 1995 DIT PAR LASSOCIATION EUROPENNE DES CONSTRUCTEURS DE MAJERIEL AROSPATIAL Technopolis - 175, rue Jean-Jacques Rousseau - F-92138 Issy-les-Moulineaux Cedex - Tl. (1) 47.36.98.76 UD

2、C : 621.355.82:629.7 Descriptors : Aircraft industry, aircraft equipment, element of electrical connection, electrical connector, characteristic, test, quality insurance, marking, packaging, storage ENGLISH VERSION Aerospace series Connectors, rectangular, with metallic shells and screw -locking Par

3、t 006 : Receptacle with non-removable size 22 solder contacts Product standard Srie arospatiale Luft- und Raumfahrt Connecteurs rectangulaires Rechteckstec kverbinder mit metallischem Gehuse und Schraubverriegelung Teil 006 : Fester Steckverbinder mit Ltkontakten, Gre 22, nicht lsbar botiers mtalliq

4、ues et verrouillage par vis Partie 006 : Embase avec contacts braser, taille 22, non dmontables Norme de produit Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA (Association Europenne des Constructeurs de Matriel Arospatial). It is published on gre

5、en paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability

6、is affected, physically or functionally, without re-identification of the standard. After examination and signature of the AECMA Standard Checking Centre (NPS) and formal agreement of the Official Services of the Member countries it will be submitted as a draft European Standard to CEN (European Com

7、mittee for Standardization) for formal vote. Nota - Extra copies can be supplied by 8.N A.E. - Technopolis 54 - 199, rue Jean-Jacques Rousseau - 921 38 ISSY-LES-MOULINEAUX CEDEX C 2 Chairman I Comments should be sent within six months after the date of oublication to 1 Edition approved for publicati

8、on 1995-03-31 AECMA Technopolis - 175, rue Jean-Jacques Rousseau 921 38 Issy-les-Moulineaux Cedex - FRANCE M. Le Cunff aecma 1995 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted wi

9、thout license from IHS-,-,- AECMA PRENlk32L8- OOb 95 LOL23LL 0008723 427 Page 3 prEN 321 8-006 : 1995 1 Scope This standard defines rectangular connectors receptacles with metallic shells and screw-locking, in the receptacle version with non-removable size 22 solder contacts. For associated plugs, s

10、ee EN 3218-005. For filler plugs and protective covers, see EN 4008-003 and EN 321 8-01 O. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the p

11、ublications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 321 8

12、-001 Aerospace series - Connector, rectangular, metallic shells, screw-locking - Part O01 : Technical specification ) Aerospace series - Connector, rectangular, metallic shells, screw-locking - Part 002 : Specification of performance and contact arrangements Aerospace series - Connector, rectangular

13、, metallic shells, screw-locking - Part 005 : Plug with non-removable size 22 solder contacts - Product standard l) Aerospace series - Connector, rectangular, metallic shells, screw-locking - Part O1 O : Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard EN 321 8-002 EN

14、321 8-005 EN 321 8-01 O EN 4008-003 Aerospace series - Elements of electrical and optical connection - General accessories and tooling - Part 003 : Filler plugs for contacts used in elements of electrical connection - Product standard *) 3 Definit ions See EN 3218-001 1) Published as AECMA Prestanda

15、rd at the date of publication of this standard 2) In preparation at the date of publication of this standard Previous page is blank Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted

16、without license from IHS-,-,-? 1, OM I m M AECMA PREN+32LB- 006 95 m LOL23LL 0008724 3b3 m 1 2 Page 4 prEN 321 8-006 : 1995 51.5 32 77,O 48 4 Required characteristics Dimensions are shown in figure 1 and in table 1 Masses are ipdicated in table I. Dimensions and tolerances are in millimetres. Figure

17、 1 Table 1 Mass ) with contacts Size 1) Accessories included 4.1 Materials and surface finishing See EN 3218-002, table 1 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without li

18、cense from IHS-,-,-Page 5 prEN 321 8-006 : 1995 Side mounted 51 4.2 Main general characteristics 2 See EN 321 8-002 1.1 to 1.8 Rear mounted 4.3 Panel mounting and cut-out 4.3.1 Panel mounting See figure 2 and table 2 1 E U U L Figure 2 : Rear and side mountings Maximum permissible torque on the lock

19、ing screw : 1,7 N.m. Where receptacles are mounted by the rear face, the number of compensating washers varies depending on the thickness of the panel (see table 2). Mounting from the front of the bulkhead is not permitted. Table 2 : Compensating spacers I Panel thickness 1 Number of spacers I I I 3

20、 - 1 O I I 1,9 to 2,4 I Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 6 prEN 321 8-006 : 1995 H 4.3.2 Panel cut-out See figures 3 and 4 and tabl

21、e 3 I i- =/ 0.15 B O I Maximum thickness of panel 2,4 Size 1 Size 2 Figure 3 : Rear panel mounting of receptacles D H h +,0,4 O f 0.1 -+ 0,l 4495 32,30 38,40 69,85 57,70 63,80 Figure 4 : Side panel mounting of receptacles Copyright Association Europeene des Constructeurs de Materiel Aerospatial Prov

22、ided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- AECMA PREN*32L8- OOb 95 LOL23LL 0008727 O72 9 Page 7 prEN 321 8-006 : 1995 5 Designation EXAMPLE : Identity block I EN3218AlN2DlF12 Description block RECEPTACLE Number of the basic

23、 standard Connector model (see EN 321 8-002, table 1) Size of housing (1 or 2) Finishing of housing (see EN 3218-002, table 1) Type of termination (see EN 3218-002, table 2) Contacts arrangement (see EN 321 8-002, table 5) NOTE : If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Marking See EN 3218-001 7 Technical specification See EN 3218-001 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-