ABS 123 CORR-2014 SUBSEA RISER SYSTEMS.pdf

《ABS 123 CORR-2014 SUBSEA RISER SYSTEMS.pdf》由会员分享，可在线阅读，更多相关《ABS 123 CORR-2014 SUBSEA RISER SYSTEMS.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ABSGUIDE FOR BUILDING AND CLASSING SUBSEA RISER SYSTEMS .2006 1 GUIDE FOR BUILDING AND CLASSING SUBSEA RISER SYSTEMS MAY 2006 CORRIGENDA/EDITORIALS 17 March 2008 CORRIGENDA/EDITORIALS 1 February 2014 Note: The Chapter/Section headings and references in the “Paragraph” column relate to the printed 2

2、006 Riser Guide. Changes to Chapter 1 references noted in the “Comments” column are due to the publication of the consolidated ABS Rules for Conditions of Classification Offshore Units and Structures (Part 1), which resulted in the Sections of Chapter 1 of the Riser Guide being renumbered (for examp

3、le, Section 1-3 is now Section 1-2). See Notice No. 2. Page No. Paragraph Comments Table of Contents v TOC Add new note below Chapter 1, Section 6 as follows, “See also separately published booklet ABS Rules for Conditions of Classification Offshore Units and Structures (Part 1)”. Chapter 1 Scope an

4、d Conditions of Classification Section 3 System Classification Boundaries, Symbols and Notations 11 1-3/3 Reference “1-3/1” to read “1-2/1”. Chapter 1 Scope and Conditions of Classification Section 8 Survey, Inspection and Testing 29 1-8/5.3 Reference “1-7/13” to read “1-4/13”. Chapter 2 General Des

5、ign Criteria Section 1 Design requirements and Loads 53 2-1/3 In fourth paragraph, reference “ABS FPI Guide” to read “the ABS FPI Rules”. Chapter 2 General Design Criteria Section 2 Environmental Effects 61 2-2/1 In second paragraph, reference “Chapter 1, Section 7” to read “Chapter 1, Section 4”. C

6、hapter 2 General Design Criteria Section 10 Extension of Use 101 2-10/3 In last paragraph, reference “Chapter 1, Section 8” to read “Section 1-1-8 of the ABS Rules for Conditions of Classification Offshore Units and Structures (Part 1) and Chapter 1, Section 5 of this Guide”. Chapter 3 Special Consi

7、derations Section 3 Special Considerations for Flexible Risers 126 3-3/5.3 In third paragraph, reference “flexible risres” to read “flexible risers”. Appendix 1 Composite Risers Section 2 Design 139 A1-2/1 Reference “Section A1-3” to read “Appendix 1, Section 3”. 142 A1-2/5.3.5 Reference “Section A1

8、-3” to read “Appendix 1, Section 3”. (2 places) 142 A1-2/5.5.1 Reference “Section 2-8” to read “Chapter 2, Section 8”. Corrigenda/Editorials 1 February 2014 2 ABSGUIDE FOR BUILDING AND CLASSING SUBSEA RISER SYSTEMS .2006 Page No. Paragraph Comments Appendix 1 Composite Risers Section 4 Manufacturing

9、, Installation and Testing 151 A1-4/3.1 Reference “4-1-1/3.5.2 of the ABS Steel Vessel Rules” to read “1-1-A2/5.3.1 of the ABS Rules for Conditions of Classification Offshore Units and Structures (Part 1)”. 154 A1-4/Table 1 In “Corrective Action” column for “Scratch”, “3/8“ 3/8“” to read “3/8“ 3/8“

10、(10 mm 10 mm)” Appendix 2 References by Organization 155 A2/ABS Date for Rules for Building and Classing Single Point Moorings to read “2014”. 155 A2/ABS Reference “2000 Guide for Building and Classing Floating Production Installations” to read “2014 Rules for Building and Classing Floating Production Installations”. 155 A2/ABS Date for Rules for Building and Classing Steel Vessels to read “2014”.