BS PD ISO TS 13399-204-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Inserts for reaming《切削工具数据的表示和交换 三维模型的创建和交换 扩孔刀片》.pdf

《BS PD ISO TS 13399-204-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Inserts for reaming《切削工具数据的表示和交换 三维模型的创建和交换 扩孔刀片》.pdf》由会员分享，可在线阅读，更多相关《BS PD ISO TS 13399-204-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Inserts for reaming《切削工具数据的表示和交换 三维模型的创建和交换 扩孔刀片》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication Cutting tool data representation and exchange Part 204: Creation and exchange of 3D models Inserts for reaming PD ISO/TS 13399-204:2016National foreword This Published Document is the UK implementation of ISO/TS 13399-204:2016. The UK participation in its preparation was en

2、trusted to Technical Committee MTE/18, Tools tips and inserts for cutting applications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible fo

3、r its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 84147 7 ICS 25.100.01; 35.240.50 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of th

4、e Standards Policy and Strategy Committee on 29 February 2016. Amendments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD ISO/TS 13399-204:2016 ISO 2016 Cutting tool data representation and exchange Part 204: Creation and exchange of 3D models Inserts for reaming Reprsen

5、tation et change des donnes relatives aux outils coupants Partie 204: Cration et change de modles 3D Plaquettes pour lalsage TECHNICAL SPECIFICATION ISO/TS 13399-204 Reference number ISO/TS 13399-204:2016(E) First edition 2016-02-01 PD ISO/TS 13399-204:2016 ISO/TS 13399-204:2016(E)ii ISO 2016 All ri

6、ghts reserved COPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet

7、 or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 cop

8、yrightiso.org www.iso.org PD ISO/TS 13399-204:2016 ISO/TS 13399-204:2016(E)Foreword iv Introduction vi 1 Scope . 1 2 Normative references 1 3 Starting elements, coordinate systems, planes 1 3.1 General . 1 3.2 Reference system 2 3.3 Coordinate systems . 2 3.3.1 General 2 3.3.2 Coordinate system for

9、the location of the insert 2 3.3.3 Coordinate system for the mounting of the insert 3 3.4 Planes 3 4 Design of the model . 4 5 Reaming insert with one cutting edge and double plug chamfer 4 5.1 General . 4 5.2 Necessary properties . 4 5.3 Basic geometry 5 5.4 Detailed geometry 5 6 Reaming insert wit

10、h two cutting edges and double plug chamfer .6 6.1 General . 6 6.2 Necessary properties . 6 6.3 Basic geometry 7 6.4 Detailed geometry 7 7 Reaming insert with one cutting edge and rounded corner . 8 7.1 General . 8 7.2 Necessary properties . 8 7.3 Basic geometry 9 7.4 Detailed geometry 9 8 Reaming i

11、nsert with two cutting edges and rounded corner .10 8.1 General 10 8.2 Necessary properties 10 8.3 Basic geometry .10 8.4 Detailed geometry .10 9 R eaming insert with special cutting pr ofile 11 9.1 General 11 9.2 Necessary properties 11 9.3 Basic geometry .12 9.4 Detailed geometry .12 10 Attributes

12、 of surfaces Visualization of the model features 12 11 Structure of the design elements (tree of model) .12 11.1 General 12 11.2 Example of the structure of the design elements .12 12 Data exchange model 13 Annex A (informative) Information about nominal dimensions 14 Bibliography .15 ISO 2016 All r

13、ights reserved iii Contents Page PD ISO/TS 13399-204:2016 ISO/TS 13399-204:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out throu

14、gh ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collabora

15、tes closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval c

16、riteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subjec

17、t of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade

18、name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Tech

19、nical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/TC 29, Small tools. ISO/TS 13399 consists of the following parts, under the general title Cutting tool data representation and exchange: Part 1: Overview, fund

20、amental principles and general information model Part 2: Reference dictionary for the cutting items Technical Specification Part 3: Reference dictionary for tool items Technical Specification Part 4: Reference dictionary for adaptive items Technical Specification Part 5: Reference dictionary for ass

21、embly items Technical Specification Part 50: Reference dictionary for reference systems and common concepts Technical Specification Part 60: Reference dictionary for connection systems Technical Specification Part 80: Creation and exchange of 3D models Overview and principles Technical Specification

22、 Part 100: Definitions, principles and methods for reference dictionaries Technical Specification Part 150: Usage guidelines Technical Specification Part 201: Creation and exchange of 3D models Regular inserts Technical Specification Part 202: Creation and exchange of 3D models Irregular inserts Tec

23、hnical Specification Part 203: Creation and exchange of 3D models Replaceable inserts for drilling Technical Specification Part 204: Creation and exchange of 3D models Inserts for reaming Technical Specification Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13

24、399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies Technical Specificationiv ISO 2016 All rights reserved PD ISO/TS 13399-204:2016 ISO/TS 13399-204:2016(E) Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of so

25、lid drills and countersinking tools Technical Specification Part 303: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of end mills with solid cutting edges Technical Specification Part 304: Concept for the design of 3D models based on properties accordi

26、ng to ISO/TS 13399-3: Modelling of milling cutters with arbor hole and solid cutting edges Technical Specification Part 307: Creation and exchange of 3D models End mills for indexable inserts Technical Specification Part 308: Creation and exchange of 3D models Milling cutter with arbor hole for inde

27、xable inserts Technical Specification Part 312: Creation and exchange of 3D models Reamers for indexable inserts Technical Specification Part 401: Creation and exchange of 3D models Converting, extending and reducing adaptive items Technical Specification The following parts are under preparation: P

28、art 51: Designation system for customer solution cutting tools Technical Specification Part 70: Graphical data layout Layer settings for tool designs Technical Specification Part 71: Graphical data layout Creation of documents for the standardized data exchange Graphical product information Technica

29、l Specification Part 72: Creation of documents for the standardized data exchange Definition of properties for drawing header and their XML-data exchange Technical Specification Part 309: Creation and exchange of 3D models Tool holders for indexable inserts Technical Specification Part 311: Creation

30、 and exchange of 3D models Solid reamers Technical Specification Part 405: Creation and exchange of 3D models Collets Technical Specification ISO 2016 All rights reserved v PD ISO/TS 13399-204:2016 ISO/TS 13399-204:2016(E) Introduction This part of ISO 13399 defines the concept, terms and definition

31、s regarding the creation and exchange of simplified 3D models of inserts for reaming that can be used with 3D models of cutting tools for NC-programming, simulation of manufacturing processes and the collision determination within machining processes. It is not intended to standardize the design of

32、the insert for reaming itself, nor the cutting tool. An insert for reaming is used in combination with a cutting tool in a machine to remove material from a workpiece by a shearing action at the cutting edges of the tool. Cutting tool data that can be described by ISO 13399 (all parts) include, but

33、are not limited to, everything between the workpiece and the machine tool. Information about inserts, solid tools, assembled tools, adaptors, components and their relationships can be represented by this part of ISO 13399. The increasing demand for providing the end user with 3D models for the purpo

34、ses defined above is the basis for the development of this series of International Standards. The objective of ISO 13399 (all parts) is to provide the means to represent the information that describes cutting tools in a computer sensible form that is independent from any particular computer system.

35、The representation will facilitate the processing and exchange of cutting tool data within and between different software systems and computer platforms and support the application of this data in manufacturing planning, cutting operations and the supply of tools. The nature of this description make

36、s it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and for archiving. The methods that are used for these representations are those developed by ISO/TC 184/SC 4 for the representation of product data by using standardized information

37、models and reference dictionaries. Definitions and identifications of dictionary entries are defined by means of standard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from a joint effort between ISO/TC 184/SC 4 and IEC/TC 3/SC 3D,

38、 and in its extensions defined in ISO 13584-24 and ISO 13584-25.vi ISO 2016 All rights reserved PD ISO/TS 13399-204:2016 TECHNICAL SPECIFICATION ISO/TS 13399-204:2016(E) Cutting tool data representation and exchange Part 204: Creation and exchange of 3D models Inserts for reaming 1 Scope This part o

39、f ISO 13399 specifies a concept for the design of cutting items, limited to any kind of replaceable inserts for reaming, using related properties and domains of values. This part of ISO 13399 specifies a common way of designing simplified models that contain the following: definitions and identifica

40、tion of the design features of replaceable inserts for reaming, with a link to the properties used; definitions and identification of the internal structure of the 3D model that represents the features and the properties of replaceable inserts for reaming; The following are outside the scope of this

41、 part of ISO 13399: applications where these standard data may be stored or referenced; creation and exchange of simplified 3D models for cutting tools; creation and exchange of simplified 3D models for tool items; creation and exchange of simplified 3D models for other cutting items not described i

42、n this part of ISO 13399; creation and exchange of simplified 3D models for adaptive items; creation and exchange of simplified 3D models for assembly items and auxiliary items. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are i

43、ndispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/TS 13399-2, Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting

44、 items. ISO/TS 13399-80, Cutting tool data representation and exchange Part 80: Creation and exchange of 3D models Overview and principles 3 Starting elements, coordinate systems, planes 3.1 General The creation of 3D models shall be done by means of nominal dimensions. WARNING There is no guarantee

45、 that the 3D model, created according to the methods described in this part of ISO 13399, is a true representation of the physical tool supplied by the tool ISO 2016 All rights reserved 1 PD ISO/TS 13399-204:2016 ISO/TS 13399-204:2016(E) manufacturer. If the models are used for simulation purposes,

46、e.g. CAM simulation, it shall be taken into consideration that the real product dimensions can differ from those nominal dimensions. NOTE Some of the definitions have been taken from ISO/TS 13399-50. 3.2 Reference system The reference system consists of the following standard elements: standard coor

47、dinate system: right-handed rectangular Cartesian system in three dimensional space, called primary coordinate system (PCS); three orthogonal planes: planes in the coordinate system that contain the axes of the system, named XY plane (XYP), XZ plane (XZP) and YZ plane (YZP); three orthogonal axes: a

48、xes built as intersections of the three orthogonal plane lines respectively, named x axis (XA), y axis (YA) and z axis (ZA). 3.3 Coordinate systems 3.3.1 General In principle, an insert has two coordinate systems: the primary coordinate system, which determines the position of the insert in the spac

49、e; the secondary coordinate system that helps to mount the insert on to a tool body. 3.3.2 Coordinate system for the location of the insert The primary coordinate system (PCS), shown in Figure 1, defines the position of the insert in the space. The determinations are the following: the insert is located in the XY quadrant; the cutting edges are colline