BS PD IEC TS 62332-3-2016 Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Hermetic motor-compressors《电气绝缘系统 (EIS) 液态和固态联合部件的.pdf

《BS PD IEC TS 62332-3-2016 Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Hermetic motor-compressors《电气绝缘系统 (EIS) 液态和固态联合部件的.pdf》由会员分享，可在线阅读，更多相关《BS PD IEC TS 62332-3-2016 Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Hermetic motor-compressors《电气绝缘系统 (EIS) 液态和固态联合部件的.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Part 3: Hermetic motor-compressors PD IEC/TS 62332-3:2016 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National foreword This Published Document is the UK implementatio

2、n of IEC/TS 62332-3:2016. The UK participation in its preparation was entrusted to Technical Committee GEL/112, Evaluation and qualification of electrical insulating materials and systems. A list of organizations represented on this committee can be obtained on request to its secretary. This publica

3、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 90215 4 ICS 29.080.30 Compliance with a British Standard cannot confer immuni

4、ty from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 August 2016. Amendments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD IEC/TS 62332-3:2016 IEC TS 62332-3 Edition 1.0 2016-07 TECHNI

5、CAL SPECIFICATION SPECIFICATION TECHNIQUE Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Part 3: Hermetic motor-compressors Systmes disolation lectrique (SIE) valuation thermique de composants liquides et solides combins Partie 3: Motocompresseurs herm

6、tiques INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.080.30 ISBN 978-2-8322-3527-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained th

7、is publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside PD IEC/TS 62332-3:2016 2 IEC TS 62332-3:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Terms and d

8、efinitions 8 4 Electrical insulation material (EIM) evaluation 9 4.1 General description . 9 4.2 Test equipment . 9 4.2.1 Autoclave . 9 4.2.2 Ageing oven . 10 4.3 Specimen 10 4.3.1 General . 10 4.3.2 Determination of component shape, volume or weight of EIM 10 4.3.3 Reference test subject . 12 4.4 T

9、est procedures 12 4.4.1 General test procedure . 12 4.4.2 Preparation of the autoclave . 12 4.4.3 Ageing . 13 4.4.4 Opening procedure 13 4.5 Diagnostic test 13 4.5.1 General . 13 4.5.2 Solid insulation materials . 13 4.5.3 Liquid insulation material (refrigerant oil) 14 4.6 Analysis of data 15 4.6.1

10、 End-point criteria . 15 4.6.2 End-of-life of the oil and solid component . 15 4.6.3 Extrapolation of data 15 5 Electrical insulation system (EIS) evaluation 15 5.1 General description . 15 5.2 Test equipment . 15 5.2.1 Autoclave . 15 5.2.2 Ageing oven . 16 5.2.3 Specimen mounting tool . 16 5.3 Spec

11、imen 16 5.4 Test procedure 16 5.4.1 Initial screening test . 16 5.4.2 Preparation of the autoclave . 17 5.4.3 Thermal endurance test 17 5.5 End of life criterion 17 5.6 Analysis of data 17 6 Report . 17 Annex A (informative) End-point and criteria examples of thermal life 19 Annex B (informative) Su

12、ggested test procedures . 20 B.1 Test procedures for effect to the electric resistance of oil and refrigerant 20 B.1.1 General . 20 B.1.2 Autoclave . 20 PD IEC/TS 62332-3:2016IEC TS 62332-3:2016 IEC 2016 3 B.1.3 Test subject . 20 B.1.4 Test process 20 B.2 Blister test of winding wire . 20 B.2.1 Over

13、view . 20 B.2.2 General . 20 B.2.3 Autoclave . 20 B.2.4 Test subject . 21 B.2.5 Test process 21 B.2.6 Test result . 21 B.3 Refrigerant extract test for solid insulating materials 21 B.3.1 General . 21 B.3.2 Autoclave . 21 B.3.3 Test subject . 21 B.3.4 Test process 22 B.3.5 Test result . 22 B.4 Metal

14、 surface contamination test . 22 B.4.1 General . 22 B.4.2 Test procedure . 22 Bibliography . 23 Figure 1 Autoclave example for ageing test of EIM . 9 Figure 2 Examples of the autoclave for EIS ageing . 16 Figure 3 Mounting tool . 16 Figure 4 Example of GPM mounting . 16 Table 1 Hermetic motor-compre

15、ssor EIM and diagnostic test items . 10 Table 2 Diagnostic test and its method for solid insulation 14 Table 3 Diagnostic test and its method for liquid insulation . 14 Table A.1 End-point and criteria example of thermal life 19 PD IEC/TS 62332-3:2016 4 IEC TS 62332-3:2016 IEC 2016 INTERNATIONAL ELE

16、CTROTECHNICAL COMMISSION _ ELECTRICAL INSULATION SYSTEMS (EIS) THERMAL EVALUATION OF COMBINED LIQUID AND SOLID COMPONENTS Part 3: Hermetic motor-compressors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electro

17、technical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specificat

18、ions, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International

19、, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal dec

20、isions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for inte

21、rnational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In o

22、rder to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be c

23、learly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certificatio

24、n bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, pr

25、operty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited i

26、n this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying a

27、ny or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a Technical Specification when the required support cannot be obtained for the publication of an Internati

28、onal Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical Specifications are subject to review within three years of publication

29、 to decide whether they can be transformed into International Standards. IEC TS 62332-3, which is a Technical Specification, has been prepared by IEC technical committee 112: Evaluation and qualification of electrical insulating materials and systems. PD IEC/TS 62332-3:2016IEC TS 62332-3:2016 IEC 20

30、16 5 The text of this Technical Specification is based on the following documents: Enquiry draft Report on voting 112/353/DTS 112/362/RVC Full information on the voting for the approval of this Technical Specification can be found in the report on voting indicated in the above table. This publicatio

31、n has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62332 series, published under the general title Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components, can be found on the IEC website. The committee has deci

32、ded that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an International Standard, reconfirmed, withdraw

33、n, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer.

34、PD IEC/TS 62332-3:2016 6 IEC TS 62332-3:2016 IEC 2016 INTRODUCTION This part of IEC 62332, which is a Technical Specification, describes a method for the thermal evaluation of electrical insulation systems (EIS) for electrotechnical products with combined liquid and solid components. IEC TS 62332-1

35、covers general test requirements. IEC TS 62332-2 covers a simplified test method which can be used as a screening test prior to conducting IEC TS 62332-1 testing or can be used as a quality control test to evaluate minor product changes. This part of IEC 62332 covers the evaluation and qualification

36、 of electrical insulation materials (EIM) and EIS which are applied to motor-compressors for the refrigerator or air conditioner. This document contains the evaluation items which are important to maintain the equipment performances in the refrigerator oil and refrigerant at high temperature and hig

37、h pressure. This document has been prepared in conjunction with IEC 60335-2-34. IEC TS 62332-3 is applicable to EIM and EIS evaluation for hermetic motor-compressors which are applied to the refrigerator and the air conditioner. The main procedures consist in the evaluation of EIM and EIS endurance

38、for refigerator and oil at high temperature and high pressure. It describes how to evaluate the mechanical, thermal and chemical degradation of the performances of EIM which have deep relation to keep the sound condition of the equipment. This simplified Technical Specification provides a test metho

39、d for sealed tube testing. The sealed tube should contain all the primary EIM elements in relative component ratios which compare with the actual electrotechnical device. PD IEC/TS 62332-3:2016IEC TS 62332-3:2016 IEC 2016 7 ELECTRICAL INSULATION SYSTEMS (EIS) THERMAL EVALUATION OF COMBINED LIQUID AN

40、D SOLID COMPONENTS Part 3: Hermetic motor-compressors 1 Scope This part of IEC 62332, which is a Technical Specification, is applicable to EIM and EIS containing solid and liquid components where the refrigerant, oil and thermal stresses are the dominant ageing factor, without restriction to voltage

41、 class. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (i

42、ncluding any amendments) applies. IEC 60216-1, Electrical insulating materials Thermal endurance properties Part 1: Ageing procedures and evaluation of test results IEC 60216-3, Electrical insulating materials Thermal endurance properties Part 3: Instructions for calculating thermal endurance charac

43、teristics IEC 60216-4-1:2006, Electrical insulating materials Thermal endurance properties Part 4-1: Ageing ovens Single-chamber ovens IEC 60216-5, Electrical insulating materials Thermal endurance properties Part 5: Determination of relative thermal endurance index (RTE) of an insulating material I

44、EC 60247, Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity IEC 60250, Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequen

45、cies including metre wavelengths IEC 60317-0-1, Specifications for particular types of winding wires Part 0-1: General requirements Enamelled round copper wire IEC 60505, Evaluation and qualification of electrical insulation systems IEC 60674-2, Specification for plastic films for electrical purpose

46、s. Part 2: Methods of test IEC 60684-2, Flexible insulating sleeving Part 2: Methods of test IEC 60851-5, Winding wires Test methods Part 5: Electrical properties IEC 61857-1:2008, Electrical insulation systems Procedures for thermal evaluation Part 1: General requirements Low voltage PD IEC/TS 6233

47、2-3:2016 8 IEC TS 62332-3:2016 IEC 2016 IEC 61857-21:2009, Electrical insulation systems Procedures for thermal evaluation Part 21: Specific requirements for general-purpose models Wire-wound applications IEC 62021 (all parts), Insulating liquids Determination of acidity ISO 178, Plastics Determinat

48、ion of flexural properties ASTM D4603, Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60505, as well as the following apply.

49、ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 acidity quantity of base, expressed in milligrams of potassium hydroxide per gram of sample, required to titrate potentiometrically or colourimetrically a test portion in a specified solvent