BS PD CEN TR 16792-2014 Safety of children's clothing Recommendations for the design and manufacture of children's clothing Mechanical safety《儿童服装安全 儿童服装的设计和生产建议 机械安全》.pdf

《BS PD CEN TR 16792-2014 Safety of children's clothing Recommendations for the design and manufacture of children's clothing Mechanical safety《儿童服装安全 儿童服装的设计和生产建议 机械安全》.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN TR 16792-2014 Safety of children's clothing Recommendations for the design and manufacture of children's clothing Mechanical safety《儿童服装安全 儿童服装的设计和生产建议 机械安全》.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication PD CEN/TR 16792:2014 Safety of childrens clothing Recommendations for the design and manufacture of childrens clothing Mechanical safetyPD CEN/TR 16792:2014 PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16792:2014. The UK pa

2、rticipation in its preparation was entrusted to Technical Committee TCI/66/-/2, Safety of childrens clothing. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Us

3、ers are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 83900 9 ICS 61.020; 97.190 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the

4、 authority of the Standards Policy and Strategy Committee on 31 December 2014. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dTECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT C E N / T R 1 6 7 9 2 D e c e m b e r 2 0 1 4 ICS 61.020; 97.190 English Version Safety of

5、childrens clothing - Recommendations for the design and manufacture of childrens clothing - Mechanical safety Scurit des vtements denfants - Recommandations pour la conception et la fabrication des vtements denfants - Scurit mcanique Sicherheit von Kinderbekleidung - Teil 1: Mechanische Sicherheit T

6、his Technical Report was approved by CEN on 15 December 2014. It has been drawn up by the Technical Committee CEN/TC 248. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fr

7、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES

8、KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 16792:2014 EPD CEN/TR 16792:2014 CEN/TR 16792:2014 (E) 2 Contents Page Foreword 3 Introduc

9、tion .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Mechanical hazards and associated risks 9 5 Risk assessment . 10 6 Garment design, materials and construction 11 7 Manufacture . 18 8 Packaging 21 9 Security tagging and display of garments for retail 21 Annex A (informative) Ac

10、cident data 22 Annex B (normative) Method for determination of removal force of attached components 23 Annex C (informative) Method for determination of the security of attachment of non-grippable attached components . 33 Annex D (informative) Information to be supplied by the designer to the manufa

11、cturer . 37 Annex E (informative) Rational for age definitions . 38 Annex F (informative) Test method for tensile strength of buttons and recommended minimum strength. . 39 Annex G (normative) Slide/zip fastener specification 42 Annex H (normative) Small parts assessment 43 Bibliography . 44 PD CEN/

12、TR 16792:2014 CEN/TR 16792:2014 (E) 3 Foreword This document (CEN/TR 16792:2014) has been prepared by Technical Committee CEN/TC 248, “Textiles and textile products”, the secretariat of which is held by BSI. Attention is drawn to the possibility that some of the elements of this document may be the

13、subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. PD CEN/TR 16792:2014 CEN/TR 16792:2014 (E) 4 Introduction The General Product Safety Directive 2001/95/EC 1 require all products placed on the market to be safe, and provide info

14、rmation on how the safety of products should be assessed. According to the General Product Safety Directive 1 product safety may be assessed by reference to the following: specific product regulations; national regulations; European standards which have had their references published in the Official

15、 Journal of the European Union; other European standards; community technical specifications; national standards (i.e. national standards that are not versions of European standards); industry codes of good practice; European Technical Report (TR) state of the art and technology; and the safety whic

16、h consumers may reasonably expect. More details on assessment of product safety are given in the EU The General Product Safety Directive 2001/95/EC. When designing childrens clothing, it is essential to take into consideration the behaviour of children, whose need for exploration and challenge drive

17、s them to use items in new and different ways. One common factor children share is that they are unaware of cause and effect and are therefore substantially less cautious than adults in relation to hazards. It should be emphasized that consideration of the recommendations given in this Technical Rep

18、ort from the earliest possible stage, i.e. the design stage, is of prime importance. Recommendations on risk assessment are given in Clause 5. The recommendations given relate only to mechanical safety. There are many other safety aspects relating to childrens clothing that need to be considered whe

19、n carrying out a full risk assessment, including chemical safety, thermal protection (against heat or cold), avoidance of overheating, flammability, PD CEN/TR 16792:2014 CEN/TR 16792:2014 (E) 5 1 Scope This Technical Report gives recommendations for the design and manufacture of safe childrens cloth

20、ing in relation to mechanical hazards. This Technical Report also gives recommendations on safety aspects of the packaging and display of childrens clothing, including guidance for retailers. This Technical Report is applicable to clothing including bonnets, hats, gloves, scarves, socks and other cl

21、othing accessories intended for all children up to 14 years of age. It is suggested that dressing up clothes meet the recommendations of this Technical Report in addition to the requirements of EN 71. This Technical Report is intended for use at all stages of the clothing supply chain, including use

22、 by designers, specifiers and manufacturers of childrens clothing. It is also intended to be used by importers, distributors and retailers to assist them in the selection of clothing that does not present a hazard. This Technical Report is not applicable to: a) child care articles, such as bibs, nap

23、pies and soother holders; b) footwear, such as boots, shoes and slippers; or c) toys and other items sold with the clothing; as these articles are not within the scope of CEN/TC 248. This Technical Report does not include recommendations on any clothing features that might be necessary to cater for

24、children with special needs. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

25、document (including any amendments) applies. BS 3084, Slide fasteners (zips) - Specification EN 14682, Safety of childrens clothing - Cords and drawstrings on childrens clothing - Specifications EN ISO 139, Textiles - Standard atmospheres for conditioning and testing (ISO 139) EN ISO 3758, Textiles

26、- Care labelling code using symbols (ISO 3758) EN ISO 6330, Textiles - Domestic washing and drying procedures for textile testing (ISO 6330) EN ISO 7500-1, Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibrat

27、ion of the force-measuring system (ISO 7500-1) EN ISO 10012, Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012) ISO 4915, Textiles - Stitch types - Classification and terminology PD CEN/TR 16792:2014 CEN/TR 16792:2014 (E) 6 3 Terms and definit

28、ions For the purposes of this document, the following terms and definitions apply. 3.1 baby child from birth up to age 12 months, that is all children of height up to and including 80 cm 3.2 infant child from age 12 months to and including 36 months, that is all children over 80 cm and up to and inc

29、luding 98 cm in height 3.3 child and young person person aged over 36 months and up to 14 years (that is up to and including 13 years and 11 months), that is all children over 98 cm in height and for girls up to 176 cm and for boys 182 cm in height 3.4 babies clothing garments intended by design man

30、ufacture or selling route to be worn by babies 3.5 infants clothing garments intended by design, manufacture or selling route to be worn by infants 3.6 childrens clothing garments intended by design, manufacture or selling route to be worn by children 3.7 foreign object object not intended to be a p

31、art of a garment, for example, broken needle, stone 3.8 ischaemic injury injury to a part of the body resulting from a restriction of blood circulation 3.9 attached components 3.9.1 press fastener fastening device consisting of a male component and a female component that are attached to different p

32、arts of a garment and which is fastened by aligning the two components and pressing them together Note 1 to entry: Press fasteners include poppers and snaps. Note 2 to entry: Press fasteners can be attached to a garment mechanically or can be sewn on. 3.9.2 tack button fastening device comprising a

33、button with a hollow shank on the back and a separate sharp tack, which is attached to a garment by pushing the sharp end of the tack through the fabric from the reverse side into the shank of the button Note 1 to entry: Tack buttons are also known as stud buttons. PD CEN/TR 16792:2014 CEN/TR 16792:

34、2014 (E) 7 Note 2 to entry: Tack buttons are widely used on denim and other casual garments. 3.9.3 rivet two part assembly, comprising a part (referred to as a burr) which is attached to the outer surface of the garment by a tack which passes though the fabric from the reverse side Note 1 to entry:

35、Rivets are usually used as reinforcements, particularly on the corners of pockets on denim and other casual garments. 3.9.4 eyelet item used to reinforce a hole through a garment, comprising a short metal tube with a flange at one end which is fastened to the garment by pushing it through the hole a

36、nd compressing it against a die Note 1 to entry: An eyelet may also include a washer on the reverse side. Note 2 to entry: Eyelets are used to facilitate lacing or the insertion of a drawstring, to drain pockets or to provide ventilation. 3.9.5 pom-pom ball created either from cut lengths of thread

37、or yarn fastened at the centre, or from a piece of fabric filled with filling material Note 1 to entry: Pom-poms can be secured directly to a garment or attached by means of a cord. 3.9.6 tassel bundle of lengths of yarn or other materials fastened at one end and free at the other end Note 1 to entr

38、y: Tassels can be secured directly to a garment or attached by means of a cord. 3.9.7 tab piece of textile or other material, of flat or looped construction, attached to the outside of a garment either for identification or for decorative purposes Note 1 to entry: These are distinct from adjusting t

39、abs, which are defined in EN 14682. 3.9.8 button knob or disc which is attached to a garment as a means of fastening or ornamentation 3.9.9 label fabric, plastic or similar attached to the garment to provide instructions, information or to identify the garment brand 3.10 garment assembly section of

40、a garment, made under production conditions, using production equipment and the components that are to be used in production 3.11 hazard potential source of harm to the wearer of a garment PD CEN/TR 16792:2014 CEN/TR 16792:2014 (E) 8 3.12 risk combination of the probability of occurrence of a hazard

41、 and the severity of the harm which that hazard could be expected to cause 3.13 risk assessment thorough evaluation of the risks that a garment could present to the wearer as a result of the design, materials, components and construction of the garment 3.14 sharp object object with one or more edges

42、 or points which are exposed, or which could become exposed, and which are likely to cause a cutting or piercing injury to the wearer of a garment 3.15 touch and close fastener fastener consisting of two pile fabric tapes that are attached to different parts of a garment which is fastened by pressin

43、g the pile sides of the two tapes together and which can be unfastened by peeling apart the two tapes starting at either end Note 1 to entry: Touch and close includes hook and loop. 3.16 wear trial trial of a garment involving wear by intended users in order to obtain information on the wear perform

44、ance and characteristics of the garment 3.17 magnet piece of iron, steel or alloy having the properties of attracting or repelling iron 3.18 magnetic material material capable of being attracted by, or acquiring the properties of a magnet 3.19 zip/slide fastener moving component consisting essential

45、ly of a slider body and, normally, a puller, which opens or closes the fastener by separating or engaging the interlocking members Note 1 to entry: The slider might incorporate a locking device. Alternative slider types are available with a flip-over puller or double pullers, to facilitate operation

46、 from both front and back sides. 3.20 appliqu cut out design or shape attached to the face of material for ornamentation, frequently of a different type and/or shade of material 3.21 filling material material which is encased in fabric to form part of the structure of a garment Note 1 to entry: Fill

47、ing materials include wadding, foams and feathers. PD CEN/TR 16792:2014 CEN/TR 16792:2014 (E) 9 4 Mechanical hazards and associated risks 4.1 Ischaemic injuries Ischaemic injuries can be caused by loose or untrimmed threads on the foot or hand area of garments becoming wrapped around fingers or toes

48、, or by entrapment of fingers or toes in open fabrics (e.g. crochet) or in fabrics with long float stitches. Entrapment of tongue or fingers is possible in large inflexible openings , in components such as buttons, press fasteners, eyelets and zip/slide fasteners. These can cause a tourniquet effect

49、, thus restricting the blood circulation. This is a particular concern in clothes for babies as the source of distress cannot be communicated by the baby and might go undetected for some time. In addition, areas of skin or parts of the genitalia can protrude through a mesh fabric used as a lining for swimming trunks. The skin from these parts can become entrapped in the mesh leading to ischaemic injury. Elasticated cuffs can also cause a reduction in blood flow to the hands or feet if the elastic is too tight or too strong; this is a p