BS PD CEN TR 16626-2014 Vitrified clay pipe systems for drains and sewers Guidance for voluntary third-party certification procedures《排水管和下水道用陶土管道系统 志愿第三方认证程序指南》.pdf

《BS PD CEN TR 16626-2014 Vitrified clay pipe systems for drains and sewers Guidance for voluntary third-party certification procedures《排水管和下水道用陶土管道系统 志愿第三方认证程序指南》.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN TR 16626-2014 Vitrified clay pipe systems for drains and sewers Guidance for voluntary third-party certification procedures《排水管和下水道用陶土管道系统 志愿第三方认证程序指南》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication PD CEN/TR 16626:2014 Vitrified clay pipe systems for drains and sewers Guidance for voluntary third-party certification proceduresPD CEN/TR 16626:2014 PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16626:2014. The UK particip

2、ation in its preparation was entrusted to Technical Committee B/505/2, Clay Pipes. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its

3、 correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 82824 9 ICS 23.040.01; 93.030 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of the Standa

4、rds Policy and Strategy Committee on 31 January 2014. Amendments issued since publication Date Text affectedPD CEN/TR 16626:2014TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16626 January 2014 ICS 23.040.01; 93.030 English Version Vitrified clay pipe systems for drains and sewers - G

5、uidance for voluntary third-party certification procedures Systmes de tuyaux en grs vitrifi pour les collecteurs dassainissement et les branchements - Lignes directrices relatives aux procdures de certification volontaire par tierce partie Steinzeugrohrsysteme fr Abwasserleitungen und -kanle - Leitf

6、aden fr Verfahren zur freiwilligen FremdberwachungThis Technical Report was approved by CEN on 28 October 2013. It has been drawn up by the Technical Committee CEN/TC 165. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

7、Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDI

8、ZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 16626:2014 EPD CEN/TR 16626:2014 CEN/TR

9、16626:2014 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 General 5 5 Inspection, audits and certification .5 6 Audit testing .5 Bibliography 9 PD CEN/TR 16626:2014 CEN/TR 16626:2014 (E) 3 Foreword This document (CEN/TR 16626:2014) has been prepared by

10、 Technical Committee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pa

11、tent rights. PD CEN/TR 16626:2014 CEN/TR 16626:2014 (E) 4 1 Scope This Technical Report gives guidance for the assessment of conformity of vitrified clay pipe systems for drains and sewers including pipes, fittings, manholes, perforated pipes, jacking pipes and associated products by the establishme

12、nt of voluntary third-party certification procedures. It is recommended that the quality management system conforms to or is no less stringent than the relevant requirements to EN ISO 9001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this docume

13、nt and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 295-1:2013, Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pi

14、pes, fittings and joints EN 295-2:2013, Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling EN 295-3:2012, Vitrified clay pipe systems for drains and sewers - Part 3: Test methods EN 295-4:2013, Vitrified clay pipe systems for drains and sewers - Part 4:

15、 Requirements for adaptors, connectors and flexible couplings EN 295-5:2013, Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings EN 295-6:2013, Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes a

16、nd inspection chambers EN 295-7:2013, Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking EN ISO/IEC 17021, Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021) EN ISO/IEC 17

17、065, Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 295-2:2013 and the following apply. 3.1 certification body third party assessment body ope

18、rating certification schemes Note 1 to entry: A certification body can be non-governmental or governmental (with or without regulatory authority). Note 2 to entry: A certification body is preferably accredited to EN ISO/IEC 17021 and EN ISO/IEC 17065. PD CEN/TR 16626:2014 CEN/TR 16626:2014 (E) 5 4 G

19、eneral This document contains the conditions for the assessment of conformity of any single product to EN 295-1, EN 295-4, EN 295-5, EN 295-6 and EN 295-7. However, in order to make an assessment of conformity of a full range of products coming off a production line, more elements are needed for suc

20、h as a certification scheme. This certification scheme can be required by contractual agreements for example. It is independent from the strict assessment and verification of constancy of performance procedures as given in EN 295-1:2013, ZA.2, EN 295-4:2013, ZA.2, EN 295-5:2013, ZA.2, EN 295-6:2013,

21、 ZA.2, and EN 295-7:2013, ZA.2. Unless there is a certification scheme in place, the following clauses represent the best way to assess the conformity of a range of products to the EN 295 series of product standards. 5 Inspection, audits and certification Conformity assessment is carried out by a ce

22、rtification body at least twice a year without prior notice. Third party assessors comply with EN ISO/IEC 17021 and EN ISO/IEC 17065 or equivalent. The assessors undertake the following tasks: inspections of the factory production control established and documented by the manufacturer according to E

23、N 295-2:2013, 5.3; checks of the records, including those of the initial type testing, performed according to EN 295-2:2013, 5.2; and witnessing the audit tests performed according to Table 1 to Table 5. After passing the conformity assessment, the certification body can authorise the use of their i

24、dentification symbol. 6 Audit testing Product requirements, test methods and the number of samples for audit testing are given in Table 1 to Table 5. Samples for testing are selected at random. PD CEN/TR 16626:2014 CEN/TR 16626:2014 (E) 6 Table 1 Audit testing for products to EN 2951:2013 Subject of

25、 test Characteristic Requirements according to EN 2951:2013, Clause Testing Number of samples Pipes and fittings Materials and manufacture 5.1 Visual inspection Three samples of one nominal size Dimensions 5.2, 5.3, 5.6, 5.7, 5.8 Measurement 5.4 according to EN 295-3:2012, Clause 5 5.5 according to

26、EN 295-3:2012, Clause 6 Marking 9.1 Visual inspection Pipes Crushing strength 5.9 according to EN 295-3:2012, Clause 7 Watertightness and airtightness 5.14 and 5.18 according to EN 2953:2012, Clause 12 and Clause 16 One sample of one nominal size Fittings Bond strength 5.12.1 according to EN 295-3:2

27、012, Clause 10 Airtightness or watertightness 5.14 and 5.18 according to EN 2953:2012, Clause 12 and Clause 16 Joints Watertightness 6.2 according to EN 295-3:2012, 21.2 and 21.3 One joint of one nominal size Joint interchangeability dimensions 6.4 Three samples of one nominal size Marking 9.2 PU se

28、aling elements All according to EN 6814 6.1.2, 6.1.4 One sample per moulding plant PP sleeve couplings Melt flow index 6.1.3.1 according to EN 295-3:2012,19.1 One sample per moulding plant Tensile strength 6.1.3.1 according to EN 295-3:2012, 19.2 Elongation at break 6.1.3.1 according to EN 295-3:201

29、2, 19.2 Elevated temperature 6.1.3.1 according to EN 295-3:2012, 19.3 Line displacement 6.1.3.2 according to EN 295-3:2012, Clause 20 Three samples of one nominal size Other joint materials Declared specification 6.1.5 PD CEN/TR 16626:2014 CEN/TR 16626:2014 (E) 7 Table 2 Audit testing for products t

30、o EN 2954:2013 Subject of test Characteristic Requirements according to EN 295-4:2013, Clause Testing Number of samples Metal banded flexible couplings and adopters Materials A.3.1 Visual inspection Three samples of one nominal size Dimensions A.3.2 Measurement Performance requirements A.3.3 accordi

31、ng to EN 2954:2013, A.3.4 One sample of one nominal size Marking 8 Visual inspection Three samples of one nominal size Connectors and insertable fittings and sealing rings Materials 5.1 Visual inspection Three samples of one nominal size Dimensions 5.2 to 5.5 Measurement Performance requirements 5.9

32、 according to EN 2953:2012, Clause 21 One sample of one nominal size Marking 8 Visual inspection Three samples of one nominal size Heat shrinkable sleeves Materials C.2 Visual inspection Three samples of one nominal size Dimensions C.3 Measurement Performance requirements C.4 according to EN 2954:20

33、13, C.4 One sample of one nominal size Marking 8 Visual inspection Three samples of one nominal size Table 3 Audit testing for products to EN 2955:2013 Subject of test Characteristic Requirements according to EN 295-5:2013, Clause Testing Number of samples Pipes and fittings Materials and manufactur

34、e 4.1 Visual inspection Three samples of one nominal size Dimensions 4.2, 4.3, 4.5, 4.6 and 4.7 Measurement 4.4 according to EN 2953:2012, Clause 6 Marking 8 Visual inspection Pipes Crushing strength 4.8 according to EN 2953:2012, Clause 7 Marking 8 Visual inspection PD CEN/TR 16626:2014 CEN/TR 1662

35、6:2014 (E) 8 Table 4 Audit testing for products to EN 2956:2013 Subject of test Characteristic Requirements according to EN 2956:2013, Clause Testing Number of samples Manholes and inspection chambers Materials and manufacture 4.1 Visual inspection Three samples of one nominal size Dimensions 4.2, 4

36、.3, 4.4 and 4.5 Measurement Crushing strength 4.6 according to EN 295-3:2012, Clause 7 Bond strength 4.8 according to EN 295-3:2012, Clause 10 Watertightness 4.11 according to EN 295-3:2012, Clause 26 One assembly of one nominal size Joint interchangeability dimensions 4.12 Measurement Three samples

37、 of one nominal size Marking 7 Visual inspection Table 5 Audit testing for products to EN 2957:2013 Subject of test Characteristic Requirements according to EN 2957:2013, Clause Testing Number of samples Pipes Materials and manufacture 4.1 Visual inspection Three samples of one nominal size Dimensio

38、ns 4.2.2, 4.2.3, 4.2.4, 4.2.5, 4.2.6 Measurement 4.2.7 according to EN 295-3:2012, Clause 5 4.2.8 according to EN 295-3:2012, Clause 6 Crushing strength 4.3.1 according to EN 295-3:2012, Clause 7 Compressive strength 4.3.3 according to EN 295-3:2012, Clause 27 One sample of one nominal size Watertig

39、htness and airtightness 4.4 and 4.5 according to EN 295-3:2012, Clause 12 and Clause 16 One sample of one nominal size Marking 8 Visual inspection Three samples of one nominal size Joints Watertightness 5.3 according to EN 295-3:2012, 21.2 and 21.3 One joint of one nominal size PD CEN/TR 16626:2014

40、CEN/TR 16626:2014 (E) 9 Bibliography 1 EN ISO 9001, Quality management systems - Requirements (ISO 9001) This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and se

41、rvices. BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited. British Standards Institution (BSI) BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK About us We bring together business, industry, government, con

42、sumers, innovators and others to shape their combined experience and expertise into standards -based solutions. The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sec

43、tors choose standards to help them achieve their goals. Information on standards We can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre. Buying stand

44、ards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard co

45、pies can be ordered from our Customer Services team. Subscriptions Our range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to With British Standards Online (BSOL) youll have instant access to over 55,000 British

46、 and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription f

47、ormat, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membershi

48、p, please visit With a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, e

49、mail . Revisions Our British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre. Copyright All the data, software and documentation set out in all British Standards and other BSI publication