BS ISO IEC IEEE 8802-1AR-2014 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Secure device identit.pdf

《BS ISO IEC IEEE 8802-1AR-2014 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Secure device identit.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC IEEE 8802-1AR-2014 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Secure device identit.pdf（86页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC/IEEE 8802-1AR:2014 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Part 1AR: Secure device identityBS ISO/IEC/IEEE 8802-1AR:2014 BRITISH STANDARD National foreword This British Standard is th

2、e UK implementation of ISO/IEC/IEEE 8802-1AR:2014. The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include

3、all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 86408 7 ICS 35.110 Compliance with a British Standard cannot confer immunity from legal obligations. This Brit

4、ish Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2014. Amendments issued since publication Date T e x t a f f e c t e d Reference number ISO/IEC/IEEE 8802-1AR:2014(E) IEEE 2009INTERNATIONAL STANDARD ISO/IEC/ IEEE 8802-1AR First edition 2014-02

5、-15 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Part 1AR: Secure device identity Technologies de linformation Tlcommunications et change dinformation entre systmes Rseaux locaux et mtropolitains Partie 1AR IEEE 2009 All righ

6、ts reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without permission in writing from ISO, IEC or IEEE at the respective

7、 address below. ISO copyright office IEC Central Office Institute of Electrical and Electronics Engineers, Inc. Case postale 56 3, rue de Varemb 3 Park Avenue, New York CH-1211 Geneva 20 CH-1211 Geneva 20 NY 10016-5997, USA Tel. + 41 22 749 01 11 Switzerland E-mail stds.iprieee.org Fax + 41 22 749 0

8、9 47 E-mail inmailiec.ch Web www.ieee.org E-mail copyrightiso.org Web www.iec.ch Web www.iso.org Published in Switzerland ii IEEE 2009 All rights reservedBS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E) IEEE 2009 All rights reserved iiiForeword ISO (the International Organization for Stan

9、dardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organiza

10、tion to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non- governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology

11、, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus devel

12、opment process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the pr

13、ocess and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International

14、 Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is called to the possibility that implementation of this standard may require

15、 the use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or patent claims for which a license may be

16、 required, for conducting inquiries into the legal validity or scope of patents or patent claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any, or in any licensing

17、agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards

18、 Association. ISO/IEC/IEEE 8802-1AR was prepared by the LAN/MAN Standards Committee of the IEEE Computer Society (as IEEE Std 802.1AR-2009). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between syste

19、ms, in parallel with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO/IEC

20、national bodies. ISO/IEC/IEEE 8802 consists of the following parts, under the general title Information technology Telecommunications and information exchange between systems Local and metropolitan area networks: Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specificatio

21、ns Part 1X: Port-based network access control Part 1AB: Station and media access control connectivity discovery Part 1AE: Media access control (MAC) security Part 1AR: Secure device identity Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks BS ISO/IE

22、C/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E)iv IEEE 2009 All rights reserved Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs) BS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E)BS ISO/IEC/IEEE 8

23、802-1AR:2014 ! “#$% +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Copyright 2009 IEEE. All rights reserved. iii BS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E)BS ISO/

24、IEC/IEEE 8802-1AR:2014 iv Copyright 2009 IEEE. All rights reserved. Introduction A secure device identifier (DevID) is a cryptographic identity bound to a device used for assertion of the devices identity. IEEE Std 802.1AR specifies globally unique per-device identifiers and the management and crypt

25、ographic binding of a device to its identifiers, the relationship between an initially installed identity and subsequent locally significant identities, and interfaces and methods for use of DevIDs with existing and new provisioning and authentication protocols. IEEE Std 802.1AR can be used in conju

26、nction with IEEE Std 802.1X TMB2 and other IEEE and industry standards that require a secure identifier or credential as part of authentication and provisioning processes that establish trust in a device. 1 This is the first edition of IEEE Std 802.1AR. Notice to users Laws and regulations Users of

27、these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements.

28、IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses

29、. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any ri

30、ghts in copyright to this document. Updating of IEEE documents Users of IEEE standards should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE do

31、cument at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance ofamendments, corrigenda, or erra

32、ta, visit the IEEE Standards Association website at http:/ ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the address listed previously. 1 The numbers in brackets correspond to those of the bibliography in Annex D. This introduction is not part of IEEE Std 802.1AR-2009, IEEE Standard for Local and metropolitan area networks Secure Device Identity. BS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E)