BS ISO IEC IEEE 18880-2015 Information technology Ubiquitous green community control network protocol《信息技术 泛在绿色社区控制网络协议》.pdf

《BS ISO IEC IEEE 18880-2015 Information technology Ubiquitous green community control network protocol《信息技术 泛在绿色社区控制网络协议》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC IEEE 18880-2015 Information technology Ubiquitous green community control network protocol《信息技术 泛在绿色社区控制网络协议》.pdf（82页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC/IEEE 18880:2015 Information technology Ubiquitous green community control network protocolBS ISO/IEC/IEEE 18880:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC/IEEE 18880:2015. The UK participation in its preparat

2、ion was entrusted to Technical Committee IST/6, Data communications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct appli

3、cation. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 89380 3 ICS 35.240.80 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy

4、Committee on 31 May 2015. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dReference number ISO/IEC/IEEE 18880:2015(E) IEEE 2015 INTERNATIONAL STANDARD ISO/IEC/ IEEE 18880 First edition 2015-04-15 Information technology Ubiquitous green community control network protocol Te

5、chnologies de linformation Protocole de contrle de la communaut verte omniprsente BS ISO/IEC/IEEE 18880:2015 ISO/IEC/IEEE 18880:2015(E) COPYRIGHT PROTECTED DOCUMENT IEEE 2015 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

6、any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from ISO, IEC or IEEE at the respective address below. ISO copyright office IEC Central Office Institute of Electrical and Electronics Engineers, Inc. Case postale 56 3, rue de Varemb 3 Park Aven

7、ue, New York CH-1211 Geneva 20 CH-1211 Geneva 20 NY 10016-5997, USA Tel. + 41 22 749 01 11 Switzerland E-mail stds.iprieee.org Fax + 41 22 749 09 47 E-mail inmailiec.ch Web www.ieee.org E-mail copyrightiso.org Web www.iec.ch Web www.iso.org Published in Switzerland ii IEEE 2015 All rights reservedBS

8、 ISO/IEC/IEEE 18880:2015 ISO/IEC/IEEE 18880:2015(E) IEEE 2015 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members o

9、f ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organiza

10、tions, governmental and non- governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. IEEE Standards documents are developed within the IEEE Societies and the Standards Coor

11、dinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve th

12、e final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of an

13、y of the information contained in its standards. The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at

14、 least 75 % of the national bodies casting a vote. Attention is called to the possibility that implementation of this standard may require the use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent

15、 rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or scope of patents or patent claims or determining whether any licensing terms or conditions provided

16、 in connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the ris

17、k of infringement of such rights, is entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards Association. ISO/IEC/IEEE 18880 was prepared by the Corporate Advisory Group of the IEEE SA Board of Governors (as IEEE 1888:2014). It was adopted by Joint Techn

18、ical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems, in parallel with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards Development Organization cooperation a

19、greement between ISO and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO/IEC national bodies. BS ISO/IEC/IEEE 18880:2015 ISO/IEC/IEEE 18880:2015(E)BS ISO/IEC/IEEE 18880:2015I IEEE E Standard for Ubiquitous Green C Commu unity Control Network Proto

20、col Sponsored by the Corporate Advisory Group IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE-SA Board of Governors IEEE Std 1 1888- -2014 4 (Revision of IEEE Std 1888-2011) BS ISO/IEC/IEEE 18880:2015 ISO/IEC/IEEE 18880:2015(E)BS ISO/IEC/IEEE 18880:2015 BS ISO/IEC/IEEE 18880:2015 ISO/IEC/IEEE 18

21、880:2015(E)BS ISO/IEC/IEEE 18880:2015 IEEE Std 1888-2014 (Revision of IEEE Std 1888-2011) IEEE Standard for Ubiquitous Green Community Control Network Protocol IEEE-SA Board of Governors Sponsored by the Corporate Advisory Group Approved 27 March 2014 IEEE-SA Standards Board BS ISO/IEC/IEEE 18880:20

22、15 ISO/IEC/IEEE 18880:2015(E)BS ISO/IEC/IEEE 18880:2015Abstract: The standard identifies gateways for field-bu s networks, data storage for archiving and developing data sharing platforms, and applicatio n units as important system components for developing digital communities, i.e., building-sc ale

23、 and city-wide ubiquitous facility networking infrastructure. The standard defines a data exch ange protocol that generalizes and interconnects these components (gateways, stor age, application units) over th e IPv4/v6-based networks. This enables integration of multiple facilities, data storage, ap

24、plication services such as central management, energy saving, environmental monitoring, and alarm notification systems. Keywords: access interface, actuat or, APP, application, communi cation protocol, component, data structure, energy management, energy sa ving, facility networking, gateway, GW, IE

25、EE 1888, point, registry, sensor, SOAP, storage The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 28 May 2014. Printed in the United Stat

26、es of America. IEEE is a registered trademark in the U.S. Patent marks of W3C are registered and held by its host institutions MIT, ERCIM, Keio, and Beihang. PDF: ISBN 978-0-7381-9063-1 STD98619 Print: ISBN 978-0-7381-9064-8 STDPD98619 IEEE prohibits discrimination, harassment, and bullying. For mor

27、e information, visit http:/www.ieee.org/web/aboutus/whatis/policies/p9-26.html. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE 2015 All rights reserved BS ISO/IEC/IEEE 18880:2015 I

28、SO/IEC/IEEE 18880:2015(E)BS ISO/IEC/IEEE 18880:2015Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards a

29、nd may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.” Notice and Disclaimer of Liability Concerning th e Use of IEEE Standards Documents IEEE Standards documents (standards, recommended practices, and guides), both full -use

30、and trial-use, are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE -SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by the American National Standards Institute (“

31、ANSI”), which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in

32、the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and exp

33、ressly disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non -infringement; and quality, accuracy, effectiveness, currency

34、, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that ther

35、e are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of t

36、he art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggestin g or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to

37、another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. I

38、N NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHET

39、HER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus de

40、velopment process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. IEEE 2015 All rights reserved BS ISO/IEC/IEEE 18880:2015 ISO/IEC/IEEE 18880:2015(E)BS ISO/

41、IEC/IEEE 18880:2015Official statements A statement, written or oral, that is not processed in accordance with the IEEE -SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be co nsidered to be, or be reli

42、ed upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comment

43、s on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide co nsulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should

44、 be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE a

45、nd the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would

46、 like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documen

47、ts s hould consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements

48、. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are

49、 made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non -exclusive license to photocopy portions o