BS ISO IEC 29109-7-2011 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Signature sign time series d.pdf

《BS ISO IEC 29109-7-2011 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Signature sign time series d.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29109-7-2011 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Signature sign time series d.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 7: Signature/sign time series data BS ISO/IEC 29109

2、-7:2011National foreword This British Standard is the UK implementation of ISO/IEC 29109-7:2011. The UK participation in its preparation was entrusted to Technical Committee IST/44, Biometrics. A list of organizations represented on this committee can be obtained on request to its secretary. This pu

3、blication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 68467 8 ICS 35.040 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under

4、the authority of the Standards Policy and Strategy Committee on 31 October 2011. Amendments issued since publication Amd. No. Date Text affected BRITISH STANDARD BS ISO/IEC 29109-7:2011 Reference number ISO/IEC 29109-7:2011(E) ISO/IEC 2011INTERNATIONAL STANDARD ISO/IEC 29109-7 First edition 2011-10-

5、01 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 7: Signature/sign time series data Technologies de linformation Mthodologie dessai de conformit pour les formats dinterchange de donnes biomtriques dfinis dans lISO/CEI 1979

6、4 Partie 7: Donnes de srie chronologique de signature/signe BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or m

7、echanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www

8、.iso.org Published in Switzerland ii ISO/IEC 2011 All rights reservedBS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) ISO/IEC 2011 All rights reserved iiiContents Page Foreword iv Introduction . v 1 Scope 1 2 Conformance . 1 3 Normative references 2 4 Terms and definitions . 2 5 Symbols and abbreviate

9、d terms 2 6 Conformance testing methodology . 2 6.1 General . 2 6.2 Table of requirements in the base standard . 2 6.3 Table of Test Assertions Full Format . 10 6.4 Table of Test Assertions Compact Format 21 BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) iv ISO/IEC 2011 All rights reservedForeword I

10、SO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical commit

11、tees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the wo

12、rk. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International St

13、andards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elem

14、ents of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 29109-7 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 37, Biometrics. ISO/IEC 29109 consists

15、of the following parts, under the general title Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794: Part 1: Generalized conformance testing methodology Part 2: Finger minutiae data Part 3: Finger pattern spectral data Part 4: Finger

16、 image data Part 5: Face image data Part 6: Iris image data Part 7: Signature/sign time series data Part 8: Finger pattern skeletal data Part 9: Vascular image data Part 10: Hand geometry silhouette data Part 11: Signature/sign processed dynamic data Part 13: Voice data Part 14: DNA data BS ISO/IEC

17、29109-7:2011ISO/IEC 29109-7:2011(E) ISO/IEC 2011 All rights reserved vIntroduction ISO/IEC 19794-7 specifies two data interchange formats for storing, recording, and transmitting signature/sign time series data records. This part of ISO/IEC 29109 establishes tests for checking the correctness of the

18、 binary records. Without standardized methods for conducting conformance tests of commercial products that claim to support ISO/IEC 19794-7, application developers and implementers of Biometric Service Providers can interpret the ISO/IEC 19794-7 specification differently and this can compromise inte

19、roperability. This possibility rests on the assertion that conformance to ISO/IEC 19794-7 is a necessary prerequisite for achieving interoperability among implementations. This is the motivation for development of this conformance testing methodology. This part of ISO/IEC 29109 supports those applic

20、ations that require use of signature/sign time series data according to ISO/IEC 19794-7. It defines a testing methodology to assure conformance of a vendors application or service to the base ISO/IEC 19794-7 specification. Thus this document is intended to establish elements of the conformance testi

21、ng methodology framework that are specific to the signature/ sign time series-based data record requirements of ISO/IEC 19794-7, define requirements and guidelines for specifying conformance test suites and related test methods for measuring conformity of products and services to the signature/sign

22、time series-based data record requirements of ISO/IEC 19794-7, and define test procedures to be followed before, during, and after conformance testing. This part of ISO/IEC 29109 is applicable to the development and use of conformity test method specifications, conformity test suites for ISO/IEC 197

23、94-7 records, and conformance testing programs for ISO/IEC 19794-7 conformant products. It is intended primarily for use by testing organizations, but can be applied by developers and users of test method specifications and test method implementations. The tables of test assertions in Clause 6 speci

24、fy levels of testing for the conformance requirements of ISO/IEC 19794-7. BS ISO/IEC 29109-7:2011BS ISO/IEC 29109-7:2011INTERNATIONAL STANDARD ISO/IEC 29109-7:2011(E) ISO/IEC 2011 All rights reserved 1Information technology Conformance testing methodology for biometric data interchange formats defin

25、ed in ISO/IEC 19794 Part 7: Signature/sign time series data 1 Scope This part of ISO/IEC 29109 specifies elements of conformance testing methodology, test assertions, and test procedures as applicable to ISO/IEC 19794-7. ISO/IEC 19794-7 defines two data interchange formats for signature/sign time se

26、ries data, one for general use and one compact format for use with smart cards and other tokens. This part of ISO/IEC 29109 establishes test assertions of the structure of both signature/sign time series data formats as specified in ISO/IEC 19794-7 (Type A Level 1 as defined in ISO/IEC 29109-1), tes

27、t assertions of internal consistency by checking the types of values that may be contained within each field (Type A Level 2 as defined in ISO/IEC 29109-1), and test assertions on the contents of data records in the signature/sign time series data formats as specified in ISO/IEC 19794-7 (Type A Leve

28、l 3 as defined in ISO/IEC 29109-1). This part of ISO/IEC 29109 does not establish tests of other characteristics of biometric products or other types of testing of biometric products (e.g. acceptance, performance, robustness, security), and tests of conformance of systems that do not produce ISO/IEC

29、 19794-7 records. 2 Conformance Biometric data interchange format conformance tests conform to this part of ISO/IEC 29109 if they satisfy all of the normative requirements related to Clause 6. Specifically, they shall use the test methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1:2009,

30、and all tests shall use the assertions defined in Table 2 to Table 4. Implementations of ISO/IEC 19794-7 tested according to the methodology specified shall be able to claim conformance only to those requirements specified in ISO/IEC 19794-7 that are tested by the test methods established by this me

31、thodology. Implementations of ISO/IEC 19794-7 do not necessarily need to conform to all possible aspects of ISO/IEC 19794-7, but only to those ISO/IEC 19794-7 requirements that are claimed to be supported by the implementation in an Implementation Conformance Statement, filled out in accordance with

32、 Clause 8 of ISO/IEC 29109-1:2009 and Table 1 of this part of ISO/IEC 29109. BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) 2 ISO/IEC 2011 All rights reserved3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only t

33、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 19794-7:2007, Information technology Biometric data interchange formats Part 7: Signature/sign time series data ISO/IEC 29109-1:2009, Information technology Con

34、formance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 1: Generalized conformance testing methodology 4 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 19794-7 and ISO/IEC 29109-1 apply. 5 Symbols and abbr

35、eviated terms For the purposes of this document, the symbols and abbreviated terms given in ISO/IEC 19794-7 and ISO/IEC 29109-1 apply. 6 Conformance testing methodology 6.1 General The testing methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1:2009 shall apply. The content of the tables

36、below is based on the conformance testing methodology outlined in ISO/IEC 29109-1 and shall only be used in the context of that testing methodology. 6.2 Table of requirements in the base standard The normative requirements of ISO/IEC 19794-7:2007 signature/sign time series data formats are listed in

37、 Table 1. Under subformat applicability the columns labelled F and C indicate the Full and Compact Formats. The supplier of the IUT can explain which optional components of the standard are supported and the testing laboratory can note the results of the test. Table 1 Requirements of the base standa

38、rd, ISO/IEC 19794-7:2007 Require- ment ID Reference in Base Standard Requirement Summary Level Status Subformat Applicability IUT Support Supported Range Test Result F C R-1 5.1 The coordinate system used to express the pen position shall be a three- dimensional Cartesian coordinate system. 3B M Y Y

39、 R-2 5.1 The x-axis shall be the horizontal axis of the writing plane, with x coordinates increasing to the right. 3B M Y Y R-3 5.1 The y-axis shall be the vertical axis of the writing plane, with y coordinates increasing upwards. 3B M Y Y BS ISO/IEC 29109-7:2011ISO/IEC 29109-7:2011(E) ISO/IEC 2011

40、All rights reserved 3Table 1 (continued) Require- ment ID Reference in Base Standard Requirement Summary Level Status Subformat Applicability IUT Support Supported Range Test Result F C R-4 5.1 The z-axis shall be the axis perpendicular to the writing plane, with z coordinates increasing upwards out

41、 of the writing plane starting from 0. 3C O Y Y R-5 5.2 The more significant octets of any multioctet quantity are stored at lower addresses in memory than (and are transmitted before) less significant octets. 1 M Y Y R-6 7.2 The organisation of the BDB shall be as follows: 2 M Y N R-7 1. mandatory

42、variable-length BDB header containing information about the overall BDB, 2 M Y N R-8 2. mandatory variable-length BDB body. 2 M Y N R-9 7.3.1 The BDB header shall contain infor- mation about the overall signature/ sign time series data block. 2 M Y N R-10 7.3.2 The signature/sign time series data bl

43、ock shall begin with the three ASCII characters “SDI” to identify the data block as following the full format defined in ISO/IEC 19794-7:2007, followed by a zero octet as a string terminator (5344 4900 Hex ). 1 M Y N R-11 7.3.3 The version number for the version of ISO/IEC 19794-7:2007 used in const

44、ructing the signature/sign time series data block shall be placed in four octets. This version number shall consist of three ASCII characters followed by a zero octet as a string terminator. The first and second character shall represent the major revision number and the third character will represe

45、nt the minor revision number. The version number shall be “10” (203130 Hex , an ASCII space followed by an ASCII 1 and an ASCII 0). 1 M Y N R-12 7.3.4.1 The channel descriptions field shall begin with a channel inclusion field indicating the presence or absence of channels. The channel inclusion fie

46、ld shall consist of 2 octets. Each bit shall correspond to a channel as shown in Table 4 of ISO/IEC 19794-7:2007. A bit value of 1 shall encode the presence of the corresponding channel; a bit value of 0 shall encode the absence of the corresponding channel. 1 M Y N BS ISO/IEC 29109-7:2011ISO/IEC 29

47、109-7:2011(E) 4 ISO/IEC 2011 All rights reservedTable 1 (continued) Require- ment ID Reference in Base Standard Requirement Summary Level Status Subformat Applicability IUT Support Supported Range Test Result F C R-13 7.3.4.2 The channel inclusion field shall be followed by a sequence of channel des

48、criptions for the channels indicated as present in the channel inclusion field. The order of the channel descriptions is determined by the order of indicated inclusion within the channel inclusion field (Table 4 of ISO/IEC 19794-7:2007) starting with the X channel. The channel descriptions are manda

49、tory for all channels present in the signature/sign time series data block. 2 M Y N R-14 7.3.4.2 Each channel description shall begin with a preamble. Each channel description preamble shall consist of 1 octet. Each of the bits 4 through 8 of a channel description preamble shall correspond to a channel attribute as shown in Table 5 of ISO/IEC 19794-7:2007. A bit value of 1 shall encode the presence of the corresponding channel attribute; a bit