BS ISO IEC 29109-5-2014 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Face image data《信息技术 ISO IEC.pdf

《BS ISO IEC 29109-5-2014 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Face image data《信息技术 ISO IEC.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29109-5-2014 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Face image data《信息技术 ISO IEC.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC 29109-5:2014 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 5: Face image dataBS ISO/IEC 29109-5:2014 BRITISH STANDARD National foreword This British Standard is the UK implementation of

2、 ISO/IEC 29109-5:2014. It supersedes BS ISO/IEC 29109-5:2012 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/44, Biometrics. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does n

3、ot purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 78775 1 ICS 35.040 Compliance with a British Standard cannot confer immunity from legal

4、obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2014. Amendments issued since publication Date Text affectedBS ISO/IEC 29109-5:2014 Information technology Conformance testing methodology for biometric data interchange fo

5、rmats defined in ISO/IEC 19794 Part 5: Face image data Technologies de linformation Mthodologie dessai de conformit pour les formats dinterchange de donnes biomtriques dfinis dans lISO/CEI 19794 Partie 5: Donnes dimage de la face ISO/IEC 2014 INTERNATIONAL STANDARD ISO/IEC 29109-5 Third edition 2014

6、-04-15 Reference number ISO/IEC 29109-5:2014(E)BS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E)ii ISO/IEC 2014 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

7、or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 C

8、H-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in SwitzerlandBS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E) ISO/IEC 2014 All rights reserved iii Contents Page Foreword iv Introduction v 1 Scope . 1 2 Conformance . 1 3 Normative referen

9、ces 2 4 Terms and definitions . 2 5 Symbols and abbreviated terms . 2 6 Conformance testing methodology . 2 6.1 Overview 2 6.2 Table of requirements in the base standard 2 6.3 ISO/IEC 19794-5:2005 Level 1 and 2 test assertions 13 Bibliography .28BS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E) Forewor

10、d ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical com

11、mittees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the

12、 work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval cr

13、iteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of p

14、atent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trad

15、e name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Te

16、chnical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 37, Biometrics. This third edition cancels and replaces the second edition (ISO/IEC 29109-5:2012), the tab

17、les of which have been technically revised. ISO/IEC 29109 consists of the following parts, under the general title Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794: Part 1: Generalized conformance testing methodology Part 2: Finge

18、r minutiae data Part 4: Finger image data Part 5: Face image data Part 6: Iris image data Part 7: Signature/sign time series data Part 8: Finger pattern skeletal data Part 9: Vascular image data Part 10: Hand geometry silhouette dataiv ISO/IEC 2014 All rights reservedBS ISO/IEC 29109-5:2014ISO/IEC 2

19、9109-5:2014(E) Introduction The ISO/IEC 19794-5:2005 standard specifies a data record interchange format for storing, recording, and transmitting one or more face images within a Common Biometric Exchange Formats Framework (CBEFF) data structure. Each image is accompanied by subject-specific and ima

20、ge-specific metadata contained in a header record. This part of the ISO/IEC 29109 multipart standard establishes tests for checking the correctness of the binary record. The objective of ISO/IEC 19794-5:2005 cannot be completely achieved until biometric products can be tested to determine whether th

21、ey conform to those specifications. Conforming implementations are a necessary prerequisite for achieving interoperability among implementations; therefore there is a need for a standardized conformance testing methodology, test assertions, and test procedures as applicable to specific modalities ad

22、dressed by each part of ISO/IEC 19794. The test assertions will cover as much as practical of the ISO/IEC 19794 requirements (covering the most critical features), so that the conformity results produced by the test suites will reflect the real degree of conformity of the implementations to ISO/IEC

23、19794 Data Interchange Format records. This is the motivation for the development of this conformance testing methodology. This part of ISO/IEC 29109 supports those applications that require use of face image data according to ISO/IEC 19794-5:2005. It defines a testing methodology to ensure conforma

24、nce of a vendors application or service to the base ISO/IEC 19794-5:2005 specification. Thus this document is intended to establish elements of the Conformance Testing Methodology framework that are specific to the Face Image-based Data Record requirements of ISO/IEC 19794-5:2005 conformance testing

25、, define requirements and guidelines for specifying conformance test suites and related test methods for measuring conformity of products and services to the Face Image-based Data Record requirements of ISO/IEC 19794-5:2005, and define test procedures to be followed before, during, and after conform

26、ance testing. This standard is applicable to the development and use of conformity test method specifications, conformity test suites for ISO/IEC 19794-5:2005 records, and conformance testing programs for ISO/IEC 19794-5:2005 conformant products. It is intended primarily for use by testing organizat

27、ions, but may be applied by developers and users of test method specifications and test method implementations. ISO/IEC 2014 All rights reserved vBS ISO/IEC 29109-5:2014BS ISO/IEC 29109-5:2014Information technology Conformance testing methodology for biometric data interchange formats defined in ISO

28、/IEC 19794 Part 5: Face image data 1 Scope This part of ISO/IEC 29109 specifies elements of conformance testing methodology, test assertions, and test procedures as applicable to two-dimensional face images defined in the ISO/IEC 19794-5:2005 biometric data interchange format standard for face image

29、 data. This part of ISO/IEC 29109 establishes test assertions of the structure of the face image data format as specified in ISO/IEC 19794-5:2005 (Type A Level 1 as defined in ISO/IEC 29109-1:2009), test assertions of internal consistency by checking the types of values that may be contained within

30、each field (Type A Level 2 as defined in ISO/IEC 29109-1:2009). This part of ISO/IEC 29109 does not establish tests of conformance of 3D face records defined in ISO/IEC 19794-5:2005/Amd.2, tests of conformance of CBEFF structures required by ISO/IEC 19794-5:2005, tests of consistency with the input

31、biometric data record (Level 3), tests of conformance of the image data to the quality-related specifications of ISO/IEC 19794- 5:2005, tests of conformance of the image data blocks to the respective JPEG or JPEG 2000 standards, tests of other characteristics of biometric products or other types of

32、testing of biometric products (e.g. acceptance, performance, robustness, security). 2 Conformance Biometric data interchange format conformance tests conform to this part of ISO/IEC 29109 if they satisfy all of the normative requirements related to Clause 6. Specifically, they shall use the test met

33、hodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1, and all Level 1 and Level 2 tests shall use the assertions defined in Table 2 of this part of ISO/IEC 29109. Implementations of ISO/IEC 19794-5:2005 tested according to the methodology specified shall be able to claim conformance only to t

34、hose biometric data record requirements specified in ISO/IEC 19794- 5:2005 that are tested by the test methods established by this methodology. Implementations of ISO/IEC 19794-5:2005 do not necessarily need to conform to all possible aspects of ISO/IEC 19794-5:2005, but only to those ISO/IEC 19794-

35、5:2005 requirements that are claimed to be supported by the implementation in an Implementation Conformance Statement, filled out in accordance with Clause 8 of ISO/IEC 29109-1 and Table 1 of this part of ISO/IEC 29109. INTERNATIONAL ST ANDARD ISO/IEC 29109-5:2014(E) ISO/IEC 2014 All rights reserved

36、 1BS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E) 3 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest editio

37、n of the referenced document (including any amendments) applies. ISO/IEC 19794-5:2005, Information technology Biometric data interchange formats Part 5: Face image data ISO/IEC 29109-1:2009, Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/

38、IEC 19794 Part 1: Generalized conformance testing methodology 4 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 29109-1 apply. 5 Symbols and abbreviated terms For the purposes of this document, the symbols and abbreviated terms given in ISO/IEC 291

39、09-1 apply. 6 Conformance testing methodology 6.1 Overview The testing methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1 shall apply. The content of the tables below is based on the conformance testing methodology outlined in ISO/IEC 29109-1 and shall only be used in the context of that

40、 testing methodology. 6.2 Table of requirements in the base standard The normative requirements of ISO/IEC 19794-5:2005 Biometric Data Interchange Format Part 5: Face Image Data are listed in Table 1. The supplier of the IUT can explain which optional components of the standard are supported and the

41、 testing laboratory can note the results of the test. Under subformat applicability the columns labelled B, F and T indicate the Basic, Full Frontal and Token Frontal image types. Table 1 Requirements of the Base Standard (ISO/IEC 19794-5:2005) Require- ment ID Ref. in Base Std Requirement Summary L

42、evel Sta- tus Subformat Applicabil- ity IUT Sup- port Sup- ported Range Test Result B F T R-1 5.2.1 Within the record format and all well-defined data blocks therein, all multi-byte quantities are implied shall stored in Big-Endian format. That is, the more significant bytes of any multi-byte quanti

43、ty are stored at lower addresses in memory than less significant bytes. For example, the value 1025 (2 to the 10th power plus one) would be stored as first byte = 00000100 and second byte = 00000001. 1 M Y Y Y R-2 5.2.2 Numeric Values All numeric values are fixed-length unsigned integer quantities,

44、unless otherwise specified. 3C O-3 Y Y Y2 ISO/IEC 2014 All rights reservedBS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E) Require- ment ID Ref. in Base Std Requirement Summary Level Sta- tus Subformat Applicabil- ity IUT Sup- port Sup- ported Range Test Result B F T R-3 5.4.1 Format Identifier The (4

45、 byte) Format Identifier shall consist of three ASCII characters “FAC” followed by a zero byte as a NULL string terminator to identify the record format as the face record format. 1 M Y Y Y R-4 5.4.2 Version Number The (4 byte) Version Number block shall consist of three ASCII numerals followed by a

46、 zero byte as a NULL string terminator. The first and second character will represent the major version number and the third character will represent the minor revision number. The version number of this specification shall be 0x30313000; “010” Version 1 revision 0 1 M Y Y Y R-5 Table 2 57 Length of

47、 Record 2 32- 1 1 M Y Y Y R-6 5.4.3 Length of Record The (4 byte) Record Length Block shall be the combined length in bytes for the record. This is the entire length of the record including the Facial Record Header and Facial Record Data. 2 M Y Y Y R-7 Table 2 1 Number of Facial Images 65 535 1 M Y

48、Y Y R-8 5.4.4 Number of Facial Images The (2 byte) Number of Facial Images block shall be the number of facial images included in the record. 2 M Y Y Y R-9 5.5 The Facial Information block The (20 byte) Facial Information block is intended to describe discrete properties of the individual discern- a

49、ble from the image, one is included for each facial image included in the record. The structure of this block is shown in ISO/IEC 19794-5:2005 Figure 2. Zero or more Facial Feature blocks, one Image Infor- mation block, and one Image Data block follow this block. 2 M-2 Y Y Y R-10 5.5.1 Facial Record Data Length The (4 byte) Facial Record Data Length field denotes the sum of the lengths of the Facial Information block, the Feature Point block(s), the Image Information