BS ISO IEC 25010-2011 Systems and software engineering Systems and software quality requirements and evaluation (SQuaRE) System and software quality models《系统和软件工程 系统和软件质量.pdf

《BS ISO IEC 25010-2011 Systems and software engineering Systems and software quality requirements and evaluation (SQuaRE) System and software quality models《系统和软件工程 系统和软件质量.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 25010-2011 Systems and software engineering Systems and software quality requirements and evaluation (SQuaRE) System and software quality models《系统和软件工程 系统和软件质量.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 25010:2011 Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) System and software quality modelsBS ISO/IEC 25010:201

2、1 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 25010:2011. It supersedes BS ISO/IEC 9126-1:2001 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/15, Software and systems engineering. A list of organiz

3、ations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 70223 5 ICS 35.080 Compliance with a British Standard

4、cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2011. Amendments issued since publication Date Text affectedBS ISO/IEC 25010:2011Reference number ISO/IEC 25010:2011(E) ISO/IEC 2011INTERN

5、ATIONAL STANDARD ISO/IEC 25010 First edition 2011-03-01 Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) System and software quality models Ingnierie des systmes et du logiciel Exigences de qualit et valuation des systmes et du logiciel (SQuaRE) Modl

6、es de qualit du systme et du logiciel BS ISO/IEC 25010:2011 ISO/IEC 25010:2011(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed t

7、o and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the sof

8、tware products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it

9、is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopyi

10、ng and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerla

11、nd ii ISO/IEC 2011 All rights reservedBS ISO/IEC 25010:2011 ISO/IEC 25010:2011(E) ISO/IEC 2011 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Conformance .2 3 Quality model framework2 3.1 Quality models.2 3.2 Quality in use model .3 3.3 Product quality model.3 3.4 Targets

12、 of the quality models 4 3.5 Using a quality model .5 3.6 Quality from different stakeholder perspectives .5 3.7 Relationship between the models .7 4 Terms and definitions .8 4.1 Quality in use model .8 4.2 Product quality model.10 4.3 General .16 4.4 Terms and definitions from ISO/IEC 25000.18 Anne

13、x A (informative) Comparison with the quality model in ISO/IEC 9126-1.21 Annex B (informative) Example of mapping to dependability24 Annex C (informative) Using the quality model for measurement.26 Bibliography33 BS ISO/IEC 25010:2011 ISO/IEC 25010:2011(E) iv ISO/IEC 2011 All rights reservedForeword

14、 ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical comm

15、ittees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the

16、work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International

17、Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the el

18、ements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 25010 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 7, Software and systems engineering. Th

19、is first edition of ISO/IEC 25010 cancels and replaces ISO/IEC 9126-1:2001, which has been technically revised. ISO/IEC 25010 is a part of the SQuaRE series of International Standards, which consists of the following divisions: Quality Management Division (ISO/IEC 2500n), Quality Model Division (ISO

20、/IEC 2501n), Quality Measurement Division (ISO/IEC 2502n), Quality Requirements Division (ISO/IEC 2503n), Quality Evaluation Division (ISO/IEC 2504n), SQuaRE Extension Division (ISO/IEC 25050 ISO/IEC 25099). BS ISO/IEC 25010:2011 ISO/IEC 25010:2011(E) ISO/IEC 2011 All rights reserved vIntroduction S

21、oftware products and software-intensive computer systems are increasingly used to perform a wide variety of business and personal functions. Realization of goals and objectives for personal satisfaction, business success and/or human safety relies on high-quality software and systems. High-quality s

22、oftware products and software-intensive computer systems are essential to provide value, and avoid potential negative consequences, for the stakeholders. Software products and software-intensive computer systems have many stakeholders including those who develop, acquire, use, or who are customers o

23、f businesses using software-intensive computer systems. Comprehensive specification and evaluation of the quality of software and software-intensive computer systems is a key factor in ensuring value to stakeholders. This can be achieved by defining the necessary and desired quality characteristics

24、associated with the stakeholders goals and objectives for the system. This includes quality characteristics related to the software system and data as well as the impact the system has on its stakeholders. It is important that the quality characteristics are specified, measured, and evaluated whenev

25、er possible using validated or widely accepted measures and measurement methods. The quality models in this International Standard can be used to identify relevant quality characteristics that can be further used to establish requirements, their criteria for satisfaction and the corresponding measur

26、es. This International Standard is derived from ISO/IEC 9126:1991, Software engineering Product quality, which was developed to support these needs. It defined six quality characteristics and described a software product evaluation process model. ISO/IEC 9126:1991 was replaced by two related multipa

27、rt standards: ISO/IEC 9126, Software engineering Product quality and ISO/IEC 14598, Software engineering Product evaluation. This International Standard revises ISO/IEC 9126-1:2001, and incorporates the same software quality characteristics with some amendments. The scope of the quality models has b

28、een extended to include computer systems, and quality in use from a system perspective. Context coverage has been added as a quality in use characteristic, with subcharacteristics context completeness and flexibility. Security has been added as a characteristic, rather than a subcharacteristic of fu

29、nctionality, with subcharacteristics confidentiality, integrity, non-repudiation, accountability and authenticity. C ompatibility (including interoperability and co-existence) has been added as a characteristic. The following subcharacteristics have been added: functional completeness, capacity, use

30、r error protection, accessibility, availability, modularity and reusability. The compliance subcharacteristics have been removed, as compliance with laws and regulations is part of overall system requirements, rather than specifically part of quality. The internal and external quality models have be

31、en combined as the product quality model. When appropriate, generic definitions have been adopted, rather than using software-specific definitions. Several characteristics and subcharacteristics have been given more accurate names. Full details of the changes are in Annex A. This International Stand

32、ard is intended to be used in conjunction with the other parts of the SQuaRE series of International Standards (ISO/IEC 25000 to ISO/IEC 25099), and with ISO/IEC 14598 until superseded by the ISO/IEC 2504n series of International Standards. BS ISO/IEC 25010:2011 ISO/IEC 25010:2011(E) vi ISO/IEC 2011

33、 All rights reservedFigure 1 (adapted from ISO/IEC 25000) illustrates the organization of the SQuaRE series representing families of standards, further called divisions. Figure 1 Organization of SQuaRE series of International Standards The divisions within the SQuaRE series are: ISO/IEC 2500n - Qual

34、ity Management Division. The International Standards that form this division define all common models, terms and definitions further referred to by all other International Standards from the SQuaRE series. The division also provides requirements and guidance for a supporting function that is respons

35、ible for the management of the requirements, specification and evaluation of software product quality. ISO/IEC 2501n - Quality Model Division. The International Standards that form this division present detailed quality models for computer systems and software products, quality in use, and data. Pra

36、ctical guidance on the use of the quality models is also provided. ISO/IEC 2502n - Quality Measurement Division. The International Standards that form this division include a software product quality measurement reference model, mathematical definitions of quality measures, and practical guidance fo

37、r their application. Examples are given of internal and external measures for software quality, and measures for quality in use. Quality Measure Elements (QME) forming foundations for these measures are defined and presented. ISO/IEC 2503n - Quality Requirements Division. The International Standards

38、 that form this division help specify quality requirements, based on quality models and quality measures. These quality requirements can be used in the process of quality requirements elicitation for a software product to be developed or as input for an evaluation process. ISO/IEC 2504n - Quality Ev

39、aluation Division. The International Standards that form this division provide requirements, recommendations and guidelines for software product evaluation, whether performed by evaluators, acquirers or developers. The support for documenting a measure as an Evaluation Module is also present. BS ISO

40、/IEC 25010:2011 ISO/IEC 25010:2011(E) ISO/IEC 2011 All rights reserved vii ISO/IEC 25050 25099 SQuaRE Extension Division. These International Standards currently include requirements for quality of Commercial Off-The-Shelf software and Common Industry Formats for usability reports. The quality model

41、s in this International Standard can be used in conjunction with ISO/IEC 12207 and ISO/IEC 15288, particularly the processes associated with requirements definition, verification and validation with a specific focus on the specification and evaluation of quality requirements. ISO/IEC 25030 describes

42、 how the quality models can be used for software quality requirements, and ISO/IEC 25040 describes how the quality models can be used for the software quality evaluation process. This International Standard can also be used in conjunction with ISO/IEC 15504 (which is concerned with software process

43、assessment) to provide: a framework for software product quality definition in the customer-supplier process; support for review, verification and validation, and a framework for quantitative quality evaluation, in the support process; support for setting organizational quality goals in the manageme

44、nt process. This International Standard can be used in conjunction with ISO 9001 (which is concerned with quality assurance processes) to provide: support for setting quality goals; support for design review, verification and validation. BS ISO/IEC 25010:2011BS ISO/IEC 25010:2011 INTERNATIONAL STAND

45、ARD ISO/IEC 25010:2011(E) ISO/IEC 2011 All rights reserved 1Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) System and software quality models 1 Scope This International Standard defines: a) A quality in use model composed of five characteristics (s

46、ome of which are further subdivided into subcharacteristics) that relate to the outcome of interaction when a product is used in a particular context of use. This system model is applicable to the complete human-computer system, including both computer systems in use and software products in use. b)

47、 A product quality model composed of eight characteristics (which are further subdivided into subcharacteristics) that relate to static properties of software and dynamic properties of the computer system. The model is applicable to both computer systems and software products. The characteristics de

48、fined by both models are relevant to all software products and computer systems. The characteristics and subcharacteristics provide consistent terminology for specifying, measuring and evaluating system and software product quality. They also provide a set of quality characteristics against which st

49、ated quality requirements can be compared for completeness. NOTE Although the scope of the product quality model is intended to be software and computer systems, many of the characteristics are also relevant to wider systems and services. ISO/IEC 25012 contains a model for data quality that is complementary to this model. The scope of the models excludes purely functional properties (see C.6), but it does include functional suitability (see 4.2.1). The scope of applic