BS ISO IEC 19763-6-2015 Information technology Metamodel framework for interoperability (MFI) Registry Summary《信息技术 互操作性元模型框架 (MFI) 注册表汇总》.pdf

《BS ISO IEC 19763-6-2015 Information technology Metamodel framework for interoperability (MFI) Registry Summary《信息技术 互操作性元模型框架 (MFI) 注册表汇总》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 19763-6-2015 Information technology Metamodel framework for interoperability (MFI) Registry Summary《信息技术 互操作性元模型框架 (MFI) 注册表汇总》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC 19763-6:2015 Information technology Metamodel framework for interoperability (MFI) Part 6: Registry SummaryBS ISO/IEC 19763-6:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 19763-6:2015. The UK participation in i

2、ts preparation was entrusted to Technical Committee IST/40, Data management and interchange. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsib

3、le for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 76236 9 ICS 35.040 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards

4、 Policy and Strategy Committee on 30 September 2015. Amendments issued since publication Date Text affectedBS ISO/IEC 19763-6:2015 Information technology Metamodel framework for interoperability (MFI) Part 6: Registry Summary Technologies de linformation Cadre du mtamodle pour linteroprabilit (MFI)

5、Partie 6: Rsum Registry INTERNATIONAL STANDARD ISO/IEC 19763-6 Reference number ISO/IEC 19763-6:2015(E) First edition 2015-09-01 ISO/IEC 2015 BS ISO/IEC 19763-6:2015ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015, Published in Switzerland All rights reserved. Unless oth

6、erwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

7、 below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 19763-6:2015(E)BS ISO/IEC 19763-6:2015 ISO/IEC 19763-6:2015(E) ISO/IEC 2015

8、 All rights reserved iiiContents Page Foreword . v Introduction vi 1 Scope 1 2 Conformance . 1 2.1 General . 1 2.2 Degree of conformance 1 2.2.1 General . 1 2.2.2 Strictly conforming 2 2.2.3 Conforming implementation 2 2.3 Implementation Conformance Statement (ICS) 2 3 Normative references 2 4 Terms

9、, definitions and abbreviated item 2 4.1 Terms and definitions . 2 4.2 Terms for concepts used in this part of 19763 . 2 4.3 Abbreviate terms . 3 5 Background and purpose . 4 5.1 General . 4 5.2 Role of the Registry Summary . 4 6 Struct of Registry Summary . 5 6.1 Overview of Registry Summary . 5 6.

10、2 Associations between Registry Summary and Core_Model package from MFI-10 6 6.3 Metaclasses in the Registry_Summary package . 7 6.3.1 Classification metaclass . 7 6.3.2 Contact metaclass . 8 6.3.3 Contents metaclass . 8 6.3.4 Document metaclass . 8 6.3.5 Interface metaclass . 9 6.3.6 Organization m

11、etaclass 10 6.3.7 Other_Standard_Model metaclass 11 6.3.8 Registry metaclass 11 6.3.9 Registry_Component metaclass 13 6.3.10 Related_Registry metaclass . 14 6.3.11 Registry_Summary_Language . 15 Annex A (informative) Types of a registry system for Registry Summary 16 A.1 Introduction 16 A.2 Types of

12、 a registry system for Registry Summary 16 A.2.1 General . 16 A.2.2 Independent Registry 16 A.2.3 Replicated Registry . 16 A.2.4 Federated Registry 17 Annex B (informative) Example of using models of other standard in Registry Summary 18 B.1 Introduction 18 B.2 Adaptation method of model of other st

13、andard . 18 B.2.1 General . 18 B.2.2 Example of using ISO/IEC 11179-3:2013 classes . 19 B.2.3 Example of using UN/CEFACT Core Component Library classes . 19 Annex C (informative) Example of XML Schema for Registry Summary . 20 BS ISO/IEC 19763-6:2015 ISO/IEC 19763-6:2015(E) iv ISO/IEC 2015 All right

14、s reservedC.1 Introduction 20 C.2 XML Schema definition .20 C.2.1 General 20 C.2.2 ComplexType definition 20 C.2.3 Sample element definition 24 Annex D (informative) Example of indicator of Registry Summary .25 D.1 Introduction 25 D.2 Location of Registry Summary in META tag .25 BS ISO/IEC 19763-6:2

15、015 ISO/IEC 19763-6:2015(E) ISO/IEC 2015 All rights reserved vForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participat

16、e in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and

17、 non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The m

18、ain task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies cas

19、ting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 19763-6 was prepared by Joint Technical Committee ISO/IEC JTC 1, Informa

20、tion technology, Subcommittee SC 32, Data Management and Interchange. ISO/IEC 19763 consists of the following parts, under the general title Information Technology Metamodel framework for interoperability (MFI): Part 1: Framework Part 3: Metamodel for ontology registration Part 5: Metamodel for proc

21、ess model registration Part 6: Registry Summary (this document) Part 7: Metamodel for service model registration Part 8: Metamodel for role and goal model registration Part 9: On demand model selection Technical Report Part 10: Core model and basic mapping Part 12: Metamodel for information model re

22、gistration Part 13: Metamodel for form design registration BS ISO/IEC 19763-6:2015 ISO/IEC 19763-6:2015(E) vi ISO/IEC 2015 All rights reservedIntroduction The effective interchange of information across business domains, countries and cultures is an important concern for people in both the IT indust

23、ry and non-IT industries. To follow the current trends, industrial consortia have engaged in the standardization of domain-specific business objects, including business process models and software components using common modelling tools and interchange facilities such as UML and XML. They are very a

24、ctive in standardizing domain-specific business process models and standard modelling constructs such as data elements, entity profiles and value domains. The ISO/IEC 19763 family of standards defines normative metamodels for the registration of models (including information models and process model

25、s), ontologies, services and roles b) shall not support any extensions to the metamodel specified in clause 6. 2.2.3 Conforming implementation A conforming implementation a) shall support the metamodel specified in clause 6; b) may support extensions to the metamodel specified in clause 6 that are c

26、onsistent with the metamodel specified in clause 6. 2.3 Implementation Conformance Statement (ICS) An implementation claiming conformance with this part of ISO/IEC 19763 shall include an Implementation Conformance Statement stating. a) whether it is a strictly conforming implementation or a conformi

27、ng implementation (see 2.2) b) what extensions are supported if it is a conforming implementation. 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the lates

28、t edition of the referenced document (including any amendments) applies. ISO/IEC 19763-1, Information technology Metamodel framework for interoperability (MFI) Part 1: Framework ISO/IEC 19763-10, Information technology Metamodel framework for interoperability (MFI) Part 10: Core model and basic mapp

29、ing ISO/IEC 11179-3, Information technology Metadata registries (MDR) Part 3: Registry metamodel and basic attributes ISO/IEC 11179-6, Information technology Metadata registries (MDR) Part 6: Registration 4 Terms, definitions and abbreviated item 4.1 Terms and definitions For the purposes of this do

30、cument, the items and definitions given in ISO/IEC 19763-1, ISO/IEC 11179-3, ISO/IEC 11179-6 and the following apply. 4.2 Terms for concepts used in this part of 19763 4.1.1 attribute metamodel characteristic of an object or set of objects BS ISO/IEC 19763-6:2015 ISO/IEC 19763-6:2015(E) ISO/IEC 2015

31、 All rights reserved 3ISO/IEC 11179-3:2013, 3.1.4 4.1.2 class metamodel description of a set of objects that share the same attributes, operations, methods, relationships, and semantics ISO/IEC 11179-3:2013, 3.1.5 4.1.3 metadata data that defines and describes other data ISO/IEC 11179-3:2013, 3.2.74

32、 4.1.4 metadata registry MDR registry system information system for registering metadata, NOTE 1 The associated information store or database is known as a metadata register. ISO/IEC 11179-3:2013, 3.2.77 NOTE 2 registry system has been added as a new synonym, 4.1.5 registry of registries RoR registr

33、y that stores Registry Summary data showing an individual registry system 4.1.6 registry summary registry summary is metadata which refers to an individual registry system or an aggregate of registry systems 4.3 Abbreviate terms MDR Metadata Registry MFI Metamodel Framework for Interoperability RoR

34、Registry of Registries RS Registry Summary SLA Service Level Agreement UML Unified Modeling Language URL Uniform Resource Locator XML Extensible Markup Language WSDL Web Service Description Language BS ISO/IEC 19763-6:2015 ISO/IEC 19763-6:2015(E) 4 ISO/IEC 2015 All rights reserved5 Background and pu

35、rpose 5.1 General The purpose of this part of ISO/IEC 19763 family of standards is to define the metamodel of information required in order to enable interoperability between heterogeneous metadata registries. Currently, many metadata registries have been developed and enforced in various types of b

36、usiness domains. Most of them have been developed conforming to international standards, such as e-business, healthcare, or library domains. However, those standards themselves have been incompatible each other, they are developed primarily according to requirements that came from their particular d

37、omains. This means that a single company or user who belongs to a particular domain has difficulties in accessing registries that are built according to requirements from other domains. Sharing registry information across different domains can be important for system interoperability. This part addr

38、esses registry interoperation with regard to the problems mentioned above. This standard specifies a set of information called the Registry Summary to be attached to each domain-specific registry. Furthermore, Registry Summary is premised on exchanging between registries. The Registry Summary is rep

39、resented by a metamodel using UML. 5.2 Role of the Registry Summary The Registry Summary is a small set of metadata for the Registry that is attached in the registry system. If every registry would attach this registry summary, it would be possible to capture information on the nature of another reg

40、istry as well as technical information for accessing the registry. Figure 1 illustrates a typical use case for RS (Registry Summary) and ROR (Registry of Registries). Each registry prepared in a particular domain might be able to disclose RS at its access point as entry information. Different domain

41、s, such as Manufacturing or Retailing, would be able to prepare their own dedicated registry that is a collection of RS. It should be called the Registry of Registries (ROR). Manufacturer Wholeseler Retailer Consumer Products Meta- data Registry Order Supply chain Model Registry ROR ROR ROR ROR Meta- data Registry Products Catalogue Company Directory Registries in Manufacturing Registries in Retailing RS RS RS RS RSFigure 1 Illustration of Registry Interoperability using Registry Summary