BS ISO IEC 15459-6-2014 Information technology Automatic identification and data capture techniques Unique identification Groupings《信息技术 自动识别和数据采集技术 唯一标识 分组》.pdf

《BS ISO IEC 15459-6-2014 Information technology Automatic identification and data capture techniques Unique identification Groupings《信息技术 自动识别和数据采集技术 唯一标识 分组》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 15459-6-2014 Information technology Automatic identification and data capture techniques Unique identification Groupings《信息技术 自动识别和数据采集技术 唯一标识 分组》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC 15459-6:2014 Information technology Automatic identification and data capture techniques Unique identification Part 6: GroupingsBS ISO/IEC 15459-6:2014 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 15459-6:2014. It s

2、upersedes BS ISO/IEC 15459-6:2007 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of organizations represented on this committee can be obtained on request to its secretary. This pub

3、lication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 71969 1 ICS 35.040 Compliance with a British Standard cannot confer immun

4、ity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2014. Amendments issued since publication Date Text affectedBS ISO/IEC 15459-6:2014 Information technology Automatic identification and data capture techn

5、iques Unique identification Part 6: Groupings Technologies de linformation Identification automatique et techniques de capture de donnes Identification unique Partie 6: Regroupements INTERNATIONAL STANDARD ISO/IEC 15459-6 Reference number ISO/IEC 15459-6:2014(E) Second edition 2014-11-15 ISO/IEC 201

6、4 BS ISO/IEC 15459-6:2014ii ISO/IEC 2014 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, o

7、r posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail

8、 copyrightiso.org Web www.iso.org Published in Switzerland ISO/IEC 15459-6:2014(E)BS ISO/IEC 15459-6:2014ISO/IEC 15459-6:2014(E)Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 Terms and definitions . 2 4 Identities for individual entities 2 5 Identities for grouping o

9、f entities 2 6 Identity for grouping of products, units and items . 2 6.1 General . 2 6.2 Maximum number of characters permissible in a unique identity 2 6.3 Permissible character sets in an identity . 3 7 Implementation of coding using AIDC media . 3 Annex A (informative) Groupings . 4 Annex B (inf

10、ormative) Identities for groupings 6 Annex C (informative) Use case for identities for groupings . 8 Bibliography .10 ISO/IEC 2014 All rights reserved iiiBS ISO/IEC 15459-6:2014ISO/IEC 15459-6:2014(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electr

11、otechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technic

12、al activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technica

13、l committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted

14、 in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such pate

15、nt rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not

16、constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information

17、The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. This second edition cancels and replaces the first edition (ISO/IEC 15459-6:2007), which has been technically revised. ISO/IEC 15459 consist

18、s of the following parts (as a result of the reconstruction of previously published parts 1 to 8), under the general title Information technology Automatic identification and data capture techniques Unique identification: Part 1: Individual transport units Part 2: Registration procedures Part 3: Com

19、mon rules Part 4: Individual products and product packages Part 5: Individual returnable transport items (RTIs) Part 6: Groupingsiv ISO/IEC 2014 All rights reservedBS ISO/IEC 15459-6:2014ISO/IEC 15459-6:2014(E) Introduction Unique identities can occur at many different levels, at item level, on the

20、transport unit, on the returnable transport item, at grouping levels, and elsewhere. Such entities are often handled by several parties, both public and private, throughout their lifecycle. Each of these parties must be able to identify and trace such distinct entities so that reference can be made

21、to associated information such as quality inspection data, the chemical substance contained, the batch or lot number of parts, components or raw materials, etc. The associated information is typically held in some kind of database. The information can be accessed using EDI exchange or another approp

22、riate access protocol, e.g. a directory access protocol. There are considerable benefits if the identity of the entity is represented as a bar code or other AIDC (Automatic Identification and Data Capture) media and attached to or made a constituent part of that which is being uniquely identified so

23、 that it can be read electronically, thus minimizing errors; one identity can be used by all parties; each party can use the identity to look up its computer files to find the data associated with the entity. All AIDC technologies have the potential to encode an identity. It is expected that applica

24、tion standards, using various automatic identification technologies, will be developed based upon the identity as a prime key. These application standards, which can include additional rules for which level of identification should be used, are often made available from the Issuing Agency. The ident

25、ity for groupings of products, product packages, transport units and items defined in this part of ISO/IEC 15459, and represented in AIDC media attached to the entities (e.g. raw material, parts, transport units, finished goods, consumer products, assets, etc.), meets the needs defined in ISO/IEC 15

26、459-3, Common Rules. ISO/IEC 2014 All rights reserved vBS ISO/IEC 15459-6:2014BS ISO/IEC 15459-6:2014Information technology Automatic identification and data capture techniques Unique identification Part 6: Groupings 1 Scope This part of ISO/IEC 15459 specifies a unique string of characters for the

27、identification of groupings of products, product packages, transport units and items. The character string is intended to be represented in a linear bar code symbol and two-dimensional symbol or other AIDC media attached to the entity to meet management needs and/or regulatory needs (e.g. customs cl

28、earance). To address these needs different types of identifiers are recognized in the various parts of ISO/IEC 15459, which allows different requirements to be met by the unique identifiers associated within the context of the specific parts of ISO/IEC 15459. The unique identifiers for grouping or p

29、roducts, product packages, transport units and items enables grouping by e.g. type, characteristics, order, manufacturing, quality, location, movement, etc. to be uniquely identified. It is possible to use with other unique individual identifiers defined in other parts of ISO/IEC 15459. Encoding the

30、se unique identifiers in a data carrier enables information about the item processing to be clearly identified. The identity for groupings is intended for “look-up” purposes, and cannot be directly used as an entity identity in the strictest sense of the definition as used, for example, in ISO/IEC 1

31、5459-1, ISO/IEC 15459- 4, and ISO/IEC 15459-5. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition

32、of the referenced document (including any amendments) applies. ISO/IEC 646, Information technology ISO 7-bit coded character set for information interchange ISO/IEC 15459-1, Information technology Automatic identification and data capture techniques Unique identification Part 1: Individual transport

33、 units ISO/IEC 15459-2, Information technology Automatic identification and data capture techniques Unique identification Part 2: Registration procedures ISO/IEC 15459-3, Information technology Automatic identification and data capture techniques Unique identification Part 3: Common rules ISO/IEC 15

34、459-4, Information technology Automatic identification and data capture techniques Unique identification Part 4: Individual products and product packages ISO/IEC 15459-5, Information technology Automatic identification and data capture techniques Unique identification Part 5: Individual returnable t

35、ransport items (RTIs) ISO/IEC 19762-1, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC GS1 General Specifications INTERNATIONAL ST ANDARD ISO/IEC 15459-6:2014(E) ISO/IEC 2014 All rights reserved 1BS ISO/I

36、EC 15459-6:2014ISO/IEC 15459-6:2014(E) 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 1 9 7 6 2 - 1 a n d ISO/IEC 15459-3 apply. 4 Identities for individual entities An individual instance of an entity is aptly identified by an identity that is

37、different from any other identity. The description of such a form of unique identification is described in ISO/IEC 15459-1, ISO/IEC 15459-4 and ISO/IEC 15459-5. The provisions in ISO/IEC 15459-1, ISO/IEC 15459-4 or ISO/IEC 15459-5 shall be used for individual entities. Where unique identification fo

38、r grouping of entities, which are not necessarily of the same type, is required the provisions of Clause 5 and Clause 6 of this part of ISO/IEC 15459 shall be used. 5 Identities for grouping of entities The grouping of entities for which the type, usage, quality, or delivery, etc. is considered the

39、same could be determined to be uniquely and distinctly identified and such a grouping should be unambiguously identified by a qualifier and string as defined in Clause 6 so that groupings can be distinguished from entities using other qualifiers. The qualifier component of an identity for a grouping

40、 may use any data format supported by ISO/IEC 15434 or ISO/IEC 9834-1. What formats to be used are to be specified by the Issuing Agency rules. For the purpose of this standard examples are not meant to be exhaustive, but rather representative of the full suite of data qualifiers possible to use and

41、 relevant to this standard; GS1 Application Identifiers 01 or 402 If this method is used to create the identity each unique identity issuer would select the appropriate GS1 Application Identifier, conforming to the requirements of the GS1 General Specification, to act as the qualifier of the identit

42、y. ASC MH 10 Data Identifiers 25P, 25T, 25K or 26K If this method is used to create the identity each unique identity issuer would select the appropriate ASC MH10 Data Identifier as required by the appropriate Issuing Agency to act as the qualifier of the identity. NOTE There are situations where th

43、e identity be constructed from various factors, such as the manufacturing date, materials, production facilities, operator, environmental conditions, and many kinds of parameters at the manufacturing process is required to specify the quality of an entity, dependent on the characteristics of the ent

44、ity. In such a case, these factors should be reflected elsewhere in an AIDC domain; not as part of an identity but as an attribute to the identity according to this part or any other part of ISO/IEC 15459. 6 Identity for grouping of products, units and items 6.1 General An identity is assigned to an

45、 entity (e.g. product and/or material) to enable follow up by a unique identity issuer. This shall be done in accordance with the rules established by an authorized Issuing Agency as identified in ISO/IEC 15459-3 and ISO/IEC 15459-2. 6.2 Maximum number of characters permissible in a unique identity

46、The identity for groupings shall not contain more than 50 characters.2 ISO/IEC 2014 All rights reservedBS ISO/IEC 15459-6:2014ISO/IEC 15459-6:2014(E) For ef f icient use w it hin various AIDC dat a carrier systems, it is recommended t hat t he number of charac ters to be coded by a one line linear b

47、ar code symbol should not exceed 20 characters, and the number of characters should be kept as short as possible regardless of the permissible maximum of 50 characters. 6.3 Permissible character sets in an identity The identity shall only contain upper-case alphabetic characters and numeric digits o

48、f the invariant character set of ISO/IEC 646, see Annex A in ISO/IEC 15459-3. NOTE An Issuing Agency is permitted to make additional restrictions on the repertoire for identities using its IAC. Any data processing system shall be capable of processing identities using the full repertoire of characte

49、rs permitted for identities for groupings. 7 Implementation of coding using AIDC media All AIDC technologies have the potential to encode an identity. It is expected that application standards for entities, using various automatic identification technologies, will be developed based upon the ISO/IEC 15459 identity as a prime key. These application standards may be made available from the Issuing Agency. ISO/IEC 2014 All rights reser