BS ISO IEC 11693-2-2009 Identification cards - Optical memory cards - Co-existence of optical memory with other machine readable technology《识别卡 光学存储卡 光储存器与其他机读技术的共存》.pdf

《BS ISO IEC 11693-2-2009 Identification cards - Optical memory cards - Co-existence of optical memory with other machine readable technology《识别卡 光学存储卡 光储存器与其他机读技术的共存》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 11693-2-2009 Identification cards - Optical memory cards - Co-existence of optical memory with other machine readable technology《识别卡 光学存储卡 光储存器与其他机读技术的共存》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO/IEC 11693-2:2009 ICS 35.240.15 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Identification cards Optical memory cards Part 2: Co-existence of optical memory with other machine readable technologyThis British Standard was published under the authority

2、 of the Standards Policy and Strategy Committee on 30 November 2009. BSI 2009 ISBN 978 0 580 61520 7 Amendments/corrigenda issued since publication Date Comments BS ISO/IEC 11693-2:2009 National foreword This British Standard is the UK implementation of ISO/IEC 11693-2:2009. The UK participation in

3、its preparation was entrusted to Technical Committee IST/17, Cards and personal identification. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are respon

4、sible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.BS ISO/IEC 11693-2:2009Reference number ISO/IEC 11693-2:2009(E) ISO/IEC 2009INTERNATIONAL STANDARD ISO/IEC 11693-2 First edition 2009-10-15 Identification cards Optical memory cards Pa

5、rt 2: Co-existence of optical memory with other machine readable technologies Cartes didentification Cartes mmoire optique Partie 2: Coexistence de mmoire optique avec dautres technologies exploitables par machine BS ISO/IEC 11693-2:2009 ISO/IEC 11693-2:2009(E) PDF disclaimer This PDF file may conta

6、in embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibil

7、ity of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation para

8、meters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2009 Al

9、l rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country

10、of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2009 All rights reservedBS ISO/IEC 11693-2:2009 ISO/IEC 11693-2:2009(E) ISO/IEC 2009 All rights reserved i

11、iiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through tech

12、nical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take pa

13、rt in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare Inte

14、rnational Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some

15、 of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 11693-2 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Cards and personal iden

16、tification. ISO/IEC 11693 consists of the following parts, under the general title Identification cards Optical memory cards: Part 2: Co-existence of optical memory with other machine readable technologies The following parts are under preparation: Part 1: General characteristics BS ISO/IEC 11693-2:

17、2009 ISO/IEC 11693-2:2009(E) iv ISO/IEC 2009 All rights reservedIntroduction This part of ISO/IEC 11693 is one of a series of International Standards defining the parameters for optical memory cards and the use of such cards for the storage and interchange of digital data. These International Standa

18、rds recognize the existence of different methods for recording and reading information on optical memory cards, the characteristics of which are specific to the recording method employed. In general, these different recording methods will not be compatible with each other. Therefore, the Internation

19、al Standards are structured to accommodate the inclusion of existing and future recording methods in a consistent manner. BS ISO/IEC 11693-2:2009 INTERNATIONAL STANDARD ISO/IEC 11693-2:2009(E) ISO/IEC 2009 All rights reserved 1Identification cards Optical memory cards Part 2: Co-existence of optical

20、 memory with other machine readable technologies 1 Scope This part of ISO/IEC 11693 defines the conditions under which optical memory can co-exist with other machine readable card technologies. 2 Normative references The following referenced documents are indispensable for the application of this do

21、cument. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 11693:2005, Identification cards Optical memory cards General characteristics 1)ISO/IEC 11694-2, Identification cards Optica

22、l memory cards Linear recording method Part 2: Dimensions and location of the accessible optical area ISO/IEC 11695-2, Identification cards Optical memory cards Holographic recording method Part 2: Dimensions and location of the accessible optical area ISO/IEC 7811-2, Identification cards Recording

23、technique Part 2: Magnetic stripe Low coercivity ISO/IEC 7811-6, Identification cards Recording technique Part 6: Magnetic stripe High coercivity ISO/IEC 7811-7, Identification cards Recording technique Part 7: Magnetic stripe High coercivity, high density ISO/IEC 7811-8, Identification cards Record

24、ing technique Part 8: Magnetic stripe Coercivity of 51,7 kA/m (650 Oe) ISO/IEC 7816-2, Identification cards Integrated circuit cards Part 2: Cards with contacts Dimensions and location of the contacts ICAO Doc 9303, Part 3, Machine Readable Travel Documents Part 3: Machine Readable Official Travel D

25、ocuments, Second Edition, 2002 1) ISO/IEC 11693:2005 will be cancelled and replaced by the first edition of ISO/IEC 11693-1. BS ISO/IEC 11693-2:2009 ISO/IEC 11693-2:2009(E) 2 ISO/IEC 2009 All rights reserved3 Terms and definitions For the purposes of this document, the terms and definitions given in

26、 ISO/IEC 11693:2005 and the following apply. 3.1 machine readable zone MRZ fixed dimensional area located on an identity card, containing mandatory and optional data formatted for machine reading using optical character recognition (OCR) methods 3.2 optical character recognition OCR electronic trans

27、lation of images of printed text, captured by an optical scanner for automated data input to information technology systems 3.3 OCR-B character set and font used to print machine readable text in the machine readable zone of an identity card 4 General structure This part of ISO/IEC 11693 provides in

28、formative details to assist card manufacturers and issuers in achieving the co-existence of optical memory and the machine readable technologies on the surface or within the structure of an optical memory card complying with ISO/IEC 11693:2005 and ISO/IEC 11694-2 or ISO/IEC 11695-2. 4.1 Technology c

29、ombinations Numerous combinations of technology are possible. This part of ISO/IEC 11693 describes the combination of optical memory with: MRZ; magnetic stripe; integrated circuit cards with contacts; contactless integrated circuit cards. Each assigned location of each technology in relation to opti

30、cal memory is defined. In all cases, each technology shall be located according to its own applicable standards. 4.2 Machine readable zone (MRZ) When optical memory is combined with an MRZ, the layout of the card shall be as shown in Figure 1. The location and dimensions of the MRZ shall comply with

31、 ICAO Doc 9303, Part 3. 4.3 Magnetic stripe When optical memory is combined with a magnetic stripe, the layout of the card shall be as shown in Figure 2. The location and dimensions of the magnetic stripe shall comply with ISO/IEC 7811-2, ISO/IEC 7811-6, ISO/IEC 7811-7 or ISO/IEC 7811-8 and shall ty

32、pically be located on the side of the card opposite the accessible optical area. BS ISO/IEC 11693-2:2009 ISO/IEC 11693-2:2009(E) ISO/IEC 2009 All rights reserved 34.4 Integrated circuit cards with contacts When optical memory is combined with an integrated circuit card with contacts, the layout of t

33、he card shall be as shown in Figure 3. The location of the contacts shall comply with ISO/IEC 7816-2 and shall be located on the same side of the card as the accessible optical area. 4.5 Contactless integrated circuit cards When optical memory is combined with a contactless chip such as those specif

34、ied in ISO/IEC 14443 or ISO/IEC 15693; the chip and its antenna are laminated with the structure of the card. The most significant constraint applying to the combination of these two technologies is derived from the required cross-sectional structure of the optical memory card which in turn limits t

35、he thickness of the contactless inlay. Special construction techniques may be required to ensure compliance with the card thickness requirements specified in ISO/IEC 7810. Figure 1 Card with machine readable zone (MRZ) The position of reference tracks within the accessible optical area shall be as s

36、pecified in ISO/IEC 11694-2 or ISO/IEC 11695-2, as applicable. Accessible optical area Machine readable zone Max. dimension 30 mm Reference edge BS ISO/IEC 11693-2:2009 ISO/IEC 11693-2:2009(E) 4 ISO/IEC 2009 All rights reservedFigure 2 Card with magnetic stripe The position of reference tracks withi

37、n the accessible optical area shall be as specified in ISO/IEC 11694-2 or ISO/IEC 11695-2, as applicable. Figure 3 Card with contact chip The position of reference tracks within the accessible optical area shall be as specified in ISO/IEC 11694-2 or ISO/IEC 11695-2, as applicable. Contact chip Max.

38、dimension 20 mm Accessible optical area Magnetic stripe (on reverse) Max. dimension 30 mm Accessible optical area Reference edge Reference edge BS ISO/IEC 11693-2:2009 ISO/IEC 11693-2:2009(E) ISO/IEC 2009 All rights reserved 5Bibliography 1 ISO 1831, Printing specifications for optical character rec

39、ognition 2 ISO 1073-2, Alphanumeric character sets for optical recognition Part 2: Character set OCR-B Shapes and dimensions of the printed image 3 ISO/IEC 7810, Identification cards Physical characteristics 4 ISO/IEC 14443 (all parts), Identification cards Contactless integrated circuit cards Proxi

40、mity cards 5 ISO/IEC 15693 (all parts), Identification cards Contactless integrated circuit cards Vicinity cards BS ISO/IEC 11693-2:2009 ISO/IEC 11693-2:2009(E) ICS 35.240.15 Price based on 5 pages ISO/IEC 2009 All rights reserved BS ISO/IEC 11693-2:2009 This page has been intentionally left blankBS

41、 ISO/IEC 11693-2:2009 BSI Group Headquarters 389 Chiswick High Road, London, W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 standards BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standard

42、s in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of

43、our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 899

44、6 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20

45、8996 9001. Fax: +44 (0)20 8996 7001 Email: You may also buy directly using a debit/credit card from the BSI Shop on the Website http:/ In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless

46、otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its produ

47、cts and services. Contact Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Mem

48、bership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British Standards Online can be found at http:/ Further information about BSI is available on the BSI website at http:/ . Copyright Copyright subsists in all

49、 BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means elect