BS ISO 9655-2004 Pliers and nippers for electronics - Single-purpose nippers - Pliers for gripping and manipulating《电讯夹扭钳和剪切钳 专用钳 夹扭钳》.pdf

《BS ISO 9655-2004 Pliers and nippers for electronics - Single-purpose nippers - Pliers for gripping and manipulating《电讯夹扭钳和剪切钳 专用钳 夹扭钳》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 9655-2004 Pliers and nippers for electronics - Single-purpose nippers - Pliers for gripping and manipulating《电讯夹扭钳和剪切钳 专用钳 夹扭钳》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 9655:2004 Pliers and nippers for electronics Single-purpose pliers Pliers for gripping and manipulating ICS 25.140.30 BS ISO 9655:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 December 2004 BSI 10 December 20

2、04 ISBN 0 580 45032 5 National foreword This British Standard reproduces verbatim ISO 9655:2004 and implements it as the UK national standard. It supersedes BS 7330-4:1990 and ISO 9655:1989 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee MTE/15, Hand

3、Tools, to Subcommittee MTE/15/13, Assembly tools for screws and nuts, pliers and nippers, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international public

4、ations referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the nece

5、ssary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the inte

6、rpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iii, a blank page, pages 1 to

7、 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 9655:2004(E) OSI 4002INTERNATIONAL STANDARD ISO 9655 Second edition 2004-09-15 Pliers and nippers for

8、electronics Single-purpose pliers Pliers for gripping and manipulating Pinces pour llectronique Pinces unifonction Pinces de serrage et de manipulation BSISO9655:2004IS:5569 O4002(E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file ma

9、irp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat cace

10、ptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that th

11、e file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO 4002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna

12、form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14

13、 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 4002 Allr ithgsr esedevrBSISO9655:2004IS:5569 O4002(E) I SO 4002 All irthgs ersedevr iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO memb

14、er bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, government

15、al and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Direct

16、ives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodie

17、s casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 9655 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee S

18、C 10, Assembly tools for screws and nuts, pliers and nippers. This second edition cancels and replaces the first edition (ISO 9655:1989) which has been technically revised. BSISO9655:20044002:5569OSISBINTENRATIONAL TSANDADR IS:5569 O4002(E)I SO 4002 All irthgs ersedevr 1Pliers and nippers for electr

19、onics Single-purpose pliers Pliers for gripping and manipulating 1 Scope This International Standard specifies the principal dimensions of single-purpose pliers for electronics for gripping and manipulating. The test methods for checking their proper functioning are given in ISO 9656. The general te

20、chnical requirements are given in ISO 9657. The pliers illustrated in this International Standard are only examples and are not intended to affect the manufacturers design. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated ref

21、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 9656, Pliers and nippers for electronics Test methods ISO 9657, Pliers and nippers for electronics General technical requirements BSISO9655:20042 3 D

22、imensions 3.1 Round nose pliers The principal dimensions of round nose pliers are shown in Figure 1 and given in Table 1. Figure 1 Round nose pliers Table 1 Round nose pliers, principal dimensions Dimensions in millimetres l a b d f w Length of jaws max. max. max. 5 112 7 10 25 max. 6,5 0,8 48 Short

23、 jaws 125 8 13 30 max. 8 1,5 50 125 8 13 30 min. 8 1,5 50 Long jaws 140 9 14 34 min. 10 2 50 BSISO9655:2004 ISO 4002 All rihgts resedevr 33.2 Flat nose pliers The principal dimensions of flat nose pliers are shown in Figure 2 and given in Table 2. af u d Figure 2 Flat nose pliers Table 2 Flat nose p

24、liers, principal dimensions Dimensions in millimetres l a b d e f w Length of jaws max. max. max. min. 5 112 5 10 25 max. 6,5 1,8 1,8 48 Short jaws 125 7 13 30 max. 8 2,2 2,2 50 125 7 13 30 min. 8 2,2 2,2 50 Long jaws 140 8 14 34 min. 10 2,8 2,8 50 BSISO9655:2004IS:5569 O4002(E) 4 I SO 4002 All irth

25、gs ersedevr3.3 Snipe nose pliers The principal dimensions of snipe nose pliers are shown in Figure 3 and given in Table 3. Figure 3 Snipe nose pliers Table 3 Snipe nose pliers, principal dimensions Dimensions in millimetres l a b d e f w Length of jaws max. max. max. max. 5 112 5 10 25 max. 6,5 1,8

26、1,8 48 Short jaws 125 7 13 30 max. 8 2,2 2,2 50 125 7 13 30 min. 8 2,2 2,2 50 Long jaws 140 7 14 34 min. 10 2,8 2,8 50 4 Designation EXAMPLE 1 Round nose pliers, number 143 in accordance with ISO 8979, with a nominal length l = 125 mm and short jaws (S) are designated as follows: Round nose pliers 1

27、43 - ISO 9655 - 125 - S EXAMPLE 2 Flat nose pliers, number 141 in accordance with ISO 8979, with a nominal length l = 140 mm and long jaws (L) are designated as follows: Flat nose pliers 141 - ISO 9655 - 140 - L EXAMPLE 3 Snipe nose pliers, number 142 in accordance with ISO 8979, with a nominal leng

28、th l = 112 mm and short jaws (S) are designated as follows: Snipe nose pliers 142 - ISO 9655 - 112 - S 5 Marking Marking shall be in accordance with ISO 9657. BSISO9655:2004IS:5569 O4002(E) I SO 4002 All irthgs ersedevr 5Bibliography 1 ISO 8979, Pliers and nippers for electronics Nomenclature BSISO9

29、655:2004BS ISO 9655:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re

30、visions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or

31、ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures

32、 that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also availabl

33、e from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on nati

34、onal, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 899

35、6 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Ema

36、il: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright

37、, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise w

38、ithout prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.