BS ISO 9398-4-2003 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Washer-extractors《工业洗衣机规范 容量和能耗特性.pdf

《BS ISO 9398-4-2003 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Washer-extractors《工业洗衣机规范 容量和能耗特性.pdf》由会员分享，可在线阅读，更多相关《BS ISO 9398-4-2003 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Washer-extractors《工业洗衣机规范 容量和能耗特性.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 9398-4:2003 Specifications for industrial laundry machines Definitions and testing of capacity and consumption characteristics Part 4: Washer-extractors ICS 97.060 BS ISO 9398-4:2003 This British Standard was published under the authority of the Standards Policy and Strategy

2、Committee on 28 January 2003 BSI 28 January 2003 ISBN 0 580 41147 8 National foreword This British Standard reproduces verbatim ISO 9398-4:2003 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee TCI/83, Industrial laundering, w

3、hich has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitl

4、ed “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance

5、with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related inter

6、national and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when t

7、he document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 9398-4:2003(E)INTERNATIONAL STANDARD ISO 9398-4 Second edition 2003-01-15 Specifications for industrial laundry machines Definitions and testing of capacity and consumption characteristics Pa

8、rt 4: Washer-extractors Spcifications pour les machines de blanchisserie industrielles Dfinitions et contrle des caractristiques de capacit et de consommation Partie 4: Laveuses-essoreuses BSISO93984:2003BSISO93984:2003iiIS-8939 O4:(3002E) I SO 3002 All irhgts seredevr iiiContents Page Foreword iv 1

9、 Scope 1 2 Normative references . 1 3 Terms and definitions. 1 4 General test conditions 2 5 Determination of residual moisture content after extraction . 5 6 Energy consumption of machine 5 7 Determination of water consumption . 6 8 Hourly productivity of machine . 6 9 Machine information. 6 Biblio

10、graphy . 8 BSISO93984:2003iiiIS-8939 O4:(3002E) vi I SO 3002 All irhgts seredevrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through

11、ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates

12、 closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards.

13、 Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this

14、document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 9398-4 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for drycleaning and industrial laundering, Subcommittee SC 5, Industrial laundry an

15、d dry-cleaning machinery and accessories. This second edition cancels and replaces the first edition (ISO 9398-4:1993), which has been technically revised. ISO 9398 consists of the following parts, under the general title Specifications for industrial laundry machines Definitions and testing of capa

16、city and consumption characteristics: Part 1: Flatwork ironing machines Part 2: Batch drying tumblers Part 3: Washing tunnels Part 4: Washer-extractors BSISO93984:2003ivINTENRATIONAL TSANDADR IS-8939 O4:(3002E)I SO 3002 All irhgts seredevr 1Specifications for industrial laundry machines Definitions

17、and testing of capacity and consumption characteristics Part 4: Washer-extractors 1 Scope This part of ISO 9398 defines the characteristics of washer-extractors and gives the usual test methods for these characteristics with regard to machine capacity, power and water consumption, and hourly product

18、ivity. It is applicable for use as a reference in the drafting of purchasing orders for washer-extractors whose net usable cage volume is greater than 60 dm 3(litres). It does not cover safety requirements (see ISO 10472-2). NOTE If more detailed information on the effect of laundry machines on text

19、iles is required, see ISO 7772 after agreement between the parties involved. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refer

20、enced document (including any amendments) applies. ISO 9398-1:2002, Specifications for industrial laundry machines Definitions and testing of capacity and consumption characteristics Part 1: Flatwork ironing machines IEC 60335-2-7:2000, Safety of household and similar electrical appliances Part 2-7:

21、 Particular requirements for washing machines 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 9398-1 and the following apply. 3.1 nominal capacity (of a washer-extractor) maximum load, in kilograms, of decatized cotton articles which may be washed an

22、d extracted in the machine under the specified test conditions See 4.1. NOTE 1 The mass of this load corresponds to the mass at ( ) 1 0 8% +residual moisture content of the cotton articles. NOTE 2 The value of this load is given on the rating plate of the machine. BSISO93984:20031IS-8939 O4:(3002E)

23、2 I SO 3002 All irhgts seredevr3.2 cage (basket) volume V net usable volume, expressed in cubic decimetres (litres), equivalent to inside volume minus all inwardly projecting volumes except those of baffles or bars 3.3 load ratio c ratio of the nominal capacity of the washer-extractor, expressed in

24、kilograms, to the cage volume, expressed in cubic decimetres (litres), the optimum value of this ratio being 1:10 4 General test conditions 4.1 Machine load 4.1.1 Amount of load The test load shall correspond to the nominal capacity of the machine 4.1.2 Nature of load The test load shall comprise de

25、catized white cotton sheets with a mass per unit area of (140 20) g/m 2and dimensions of (240 20) cm (180 20) cm. 4.1.3 Number of loads Two identical loads shall be used in carrying out the tests. 4.2 Energy supply Energy for the test shall be supplied by steam, gas, electricity or heat-transport fl

26、uid, as specified by the manufacturer. 4.3 Temperature of feed water The temperature of the feed water used in the test shall be (17 3) C. For tropical countries, a temperature of (25 5) C for the rinse water used in the test is allowed. 4.4 Ambient air The ambient air temperature during the test sh

27、all be (24 6) C and the relative humidity (50 10) %. 4.5 Condition of machine The washer-extractor shall be installed as indicated by the manufacturer and shall be clean. 4.6 Machine test cycles At least one of the cycles A, B or C, in accordance with Tables 1, 2 and 3 respectively, shall be run. NO

28、TE The absence of any standard measure of the degree of soiling of the wash has led to only two test cycles being required. BSISO93984:20032IS-8939 O4:(3002E) I SO 3002 All irhgts seredevr 3Table 1 Test cycle A for industrial washer-extractors Operation Duration aTemperature Product added Bath water

29、 level bmin C Soak 5 17 3 e Wetting agent 2 g per kg of washing high Preliminary wash 8 40 3 Washing powder c(8 g to 15 g) per kg of washing low Main wash 15 85 3 Washing powder c(8 g to 15 g) per kg of washing low Drain/spin 2 Rinse 5 65 3 high Drain/spin 2 Bleaching 8 28 3 48 Hypochlorite bleach d

30、(10 cm 3to 15 cm 3 ) per kg of washing high Drain/spin 2 Neutralization 5 17 3 e Sodium hydrogen sulfite c(NaHSO 3 ) = 1,32 mg/l 1 cm 3to 2 cm 3high Drain/spin 2 Rinse 5 17 3 e Acetic acid c max (CH 3 COOH) = 800 g/l 2 cm 3high Drain/spin 2 Final rinse 5 17 3 e high Final spin 10 aTimes measured onc

31、e the desired levels and temperatures have been attained. bLow level = 2,5 l of water per kilogram of washing; high level = 5 l of water per kilogram of washing. cWashing powder as indicated in Annex B of IEC 60335-2-7:2000. d1 Hypochlorite corresponds to 3,17 g of active chlorine. eFor tropical cou

32、ntries, a (25 5) C temperature of the rinse water used in the test is allowed. BSISO93984:20033IS-8939 O4:(3002E) 4 I SO 3002 All irhgts seredevrTable 2 Test cycle B for industrial washer-extractors Operation Duration aTemperature Product added Bath water level bmin C Wash 8 80 3 Washing powder c(8

33、g to 15 g) per kg of washing low Drain/spin 2 Rinse 5 65 3 high Drain/spin 2 Bleaching 6 28 3 48 Hypochlorite bleach d(10 cm 3to 15 cm 3 ) per kg of washing high Drain/spin 2 Neutralization 3 17 3 e Sodium hydrogen sulfite c(NaHSO 3 ) = 1,32 mg/l 1 cm 3to 2 cm 3high Drain/spin 2 Final rinse 3 17 3 e

34、 high Final spin 10 aTimes measured once the desired levels and temperatures have been attained. bLow level = 2,5 l of water per kilogram of washing; high level = 5 l of water per kilogram of washing. cWashing powder as indicated in Annex B of IEC 60335-2-7:2000. d1 Hypochlorite corresponds to 3,17

35、g of active chlorine. eFor tropical countries, a (25 5) C temperature of the rinse water used in the test is allowed Table 3 Test cycle C for industrial washer-extractors Operation Duration aTemperature Product added Bath water level bmin C Wash 5 60 3 Washing powder c(8 g to 15 g) per kg of washing

36、 low Drain/spin 1 Bleaching 4 48 Hypochlorite bleach d(10 cm 3to 15 cm 3 ) per kg of washing high Drain/spin 1 Rinse 2 high Drain/spin 1 Neutralization 3 Sodium hydrogen sulfite c(NaHSO 3 ) = 1,32 mg/l 1 cm 3to 2 cm 3high Final spin 5 aTimes measured once the desired levels and temperatures have bee

37、n attained. bLow level = 2,5 l of water per kilogram of washing ; high level = 5 l of water per kilogram of washing. cWashing powder as indicated in Annex B of IEC 60335-2-7:2000. d1 Hypochlorite corresponds to 3,17 g of active chlorine. BSISO93984:20034IS-8939 O4:(3002E) I SO 3002 All irhgts serede

38、vr 55 Determination of residual moisture content after extraction 5.1 Test method 5.1.1 Under the general test conditions specified in 4.1 to 4.5, carry out one rinse cycle of 5 min duration, spin for 10 min and immediately weigh the laundry. 5.1.2 Carry out three such rinsespin operations in succes

39、sion. 5.1.3 Ascertain the mean value of the three extraction tests specified in 5.1.2. 5.2 Expression of results Indicate the mean residual moisture value of the test load after extraction, as determined in 5.1. 6 Energy consumption of machine 6.1 General The energy consumption of a washer-extractor

40、 is defined as the number of kilojoules or kilowatt hours of steam, gas, electricity or heat-transport fluid energy required during washing and extraction of a load (see 4.1) in a machine operating at its nominal capacity during the time corresponding to cycle A, B or C (see 6.3). 6.2 Test method 6.

41、2.1 Under the general test conditions specified in Clause 4, carry out one test cycle (either cycle A, B or C) with one test load (see 4.1) in order to condition the machine. 6.2.2 Run the cycle chosen in 6.2.1 three times in succession, using the same test load (see 4.1). 6.2.3 Using suitable instr

42、uments, check the values of parameters allowing the calculation of the corresponding energy consumption for a determined cycle (A or B or C) and take the mean value of the three tests. For machines using electric or gas energy for heating, energy meters are reliable; for machines using steam as the

43、heat source, for the preliminary wash and main wash, measure the water quantities to be heated, as well as the temperatures before and after steam injection. 6.3 Expression of results 6.3.1 Indicate the energy consumption, expressed as kilojoules or kilowatt hours, per kilogram, for the washing and

44、extraction of a test load of decatized cotton sheets in accordance with 4.1 (cycle A, B or C to be specified). 6.3.2 Indicate the energy consumption required by the motor or motors for the mechanical drive of the cage during the washing/extraction phases. 6.3.3 The total energy consumption required

45、by washer-extractor is the sum of the mechanical and thermal energies required. EXAMPLE Motor(s) . kWh Heating kWh _ Total . kWh BSISO93984:20035IS-8939 O4:(3002E) 6 I SO 3002 All irhgts seredevr7 Determination of water consumption 7.1 General The water consumption (including the water needed for bo

46、th washing and rinsing) of a washer-extractor is defined as the number of litres of water necessary for washing one test load (see 4.1) in a machine operating at its nominal capacity in the specified test cycle (see 4.6 and 7.3). 7.2 Test method 7.2.1 Under the general test conditions as specified i

47、n Clause 4, carry out one cycle (A, B or C) with one load (see 4.1) to condition the machine. 7.2.2 Run the cycle chosen in 7.2.1 three times in succession, using the same test load as specified in 4.1. 7.2.3 Using suitable instruments, record the corresponding water consumption required for each of

48、 the three tests and take the mean value. 7.3 Expression of results Indicate the water consumption, expressed in litres per cycle (A, B or C to be specified) and per kilogram, required for the washing and extraction of decatized cotton sheets as specified in 4.1. 8 Hourly productivity of machine 8.1 General The hourly productivity of a washer-extractor is defined as the mass, in kilograms, of a load of decatized cotton sheets as specified in 4.1 that can be washed and extracted in 1 h, not including the time for loading and unlo