BS ISO 8528-9-2017 Reciprocating internal combustion engine driven alternating current generating sets Measurement and evaluation of mechanical vibrations《往复式内燃机驱动的交流发电机组.pdf

《BS ISO 8528-9-2017 Reciprocating internal combustion engine driven alternating current generating sets Measurement and evaluation of mechanical vibrations《往复式内燃机驱动的交流发电机组.pdf》由会员分享，可在线阅读，更多相关《BS ISO 8528-9-2017 Reciprocating internal combustion engine driven alternating current generating sets Measurement and evaluation of mechanical vibrations《往复式内燃机驱动的交流发电机组.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、Reciprocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations BS ISO 85289:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017 Reciprocating internal combustion engine drive

2、n alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations Groupes lectrognes courant alternatif entrans par moteurs alternatifs combustion interne Partie 9: Mesurage et valuation des vibrations mcaniques INTERNATIONAL STANDARD ISO 8528-9 Second edition 2017-07

3、 Reference number ISO 8528-9:2017(E) National foreword This British Standard is the UK implementation of ISO 85289:2017. It supersedes BS 76989:1996 , which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MCE/14, RIC engines. A list of organizations represe

4、nted on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017 ISBN 978 0 58

5、0 85456 9 ICS 29.160.40; 17.160; 27.020Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017. Amendments/corrigenda issued since publicationDate Text aff

6、ected BRITISH STANDARD BS ISO 85289:2017 ISO 2017 Reciprocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations Groupes lectrognes courant alternatif entrans par moteurs alternatifs combustion interne Partie 9: Mesurag

7、e et valuation des vibrations mcaniques INTERNATIONAL STANDARD ISO 8528-9 Second edition 2017-07 Reference number ISO 8528-9:2017(E) BS ISO 85289:2017 ISO 8528-9:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerland All rights reserved. Unless otherwi

8、se specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address bel

9、ow or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org BS ISO 85289:2017 ISO 8528-9:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED

10、 DOCUMENT ISO 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior wr

11、itten permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgISO 8528

12、-9:2017(E)Foreword iv 1 Scope . 1 2 Normative references 1 3 T erms and definitions . 1 4 Symbols and abbreviated terms . 1 5 Regulations and additional requirements. 2 6 Measuring devices 2 7 Location of measuring points and direction of measurements . 3 8 Operating conditions during measurement 3

13、9 Evaluation of results . 3 10 Test report . 4 Annex A (informative) T ypical gener ating set c onfigur ations . 5 Annex B (informative) Remarks on the assessment of vibrations of the generating set .8 Annex C (informative) Vibration values 9 Annex D (informative) Measuring report .10 Bibliography .

14、12 ISO 2017 All rights reserved iii Contents Page BS ISO 85289:2017 ISO 8528-9:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out t

15、hrough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO colla

16、borates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approv

17、al criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives). Attention is drawn to the possibility that some of the elements of this document may be the

18、 subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).

19、Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO

20、s adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html. This document was prepared by ISO/TC 70, Internal combustion engines. This second edition cancels and replaces the first edition (ISO 8528-

21、9:1995), which has been technically revised. A list of all parts in the ISO 8528 series can be found on the ISO websiteiv ISO 2017 All rights reserved BS ISO 85289:2017 ISO 8528-9:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standard

22、s bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organiz

23、ations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its fu

24、rther maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ dir

25、ectives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in t

26、he Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, the meaning of

27、ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html. This document was prepared by ISO/TC 7

28、0, Internal combustion engines. This second edition cancels and replaces the first edition (ISO 8528-9:1995), which has been technically revised. A list of all parts in the ISO 8528 series can be found on the ISO websiteiv ISO 2017 All rights reserved INTERNATIONAL ST ANDARD ISO 8528-9:2017(E) Recip

29、rocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations 1 Scope This document describes a procedure for measuring and evaluating the external mechanical vibration behaviour of generating sets at the measuring points s

30、tated in this document. It applies to RIC engine driven a.c. generating sets for fixed and mobile installations with rigid and/or resilient mountings. It is applicable for land and marine use, excluding generating sets used on aircraft or those used to propel land vehicles and locomotives. For some

31、specific applications (essential hospital supplies, high rise buildings, etc.) supplementary requirements may be necessary. The provisions of this document are intended to be regarded as a basis for such applications. For generating sets driven by other reciprocating-type prime movers (e.g. sewage g

32、as engines, steam engines), the provisions of this document are intended to be regarded as a basis for such applications. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated re

33、ferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2041, Mechanical vibration, shock and condition monitoring Vocabulary ISO 8528-5:2013, Reciprocating internal combustion engine driven alternating c

34、urrent generating sets Part 5: Generating sets 3 T erms an d definiti ons For the purposes of this document, the terms and definitions given in ISO 2041 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: ava

35、ilable at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp 3.1 vibration severity generic term that designates a value or set of values, such as a maximum value, average value or rms value, or other parameter that is descriptive of the vibra

36、tion Note 1 to entry: It may refer to instantaneous values or average values. 4 Symbols and abbreviated terms For the purposes of this document the following symbols apply. ISO 2017 All rights reserved 1 BS ISO 85289:2017 ISO 8528-9:2017(E) n r Declared engine speed f Frequency s Displacement t Time

37、 v Velocity w Angular velocity x Axial co-ordinate y Transverse co-ordinate z Vertical co-ordinate The following subscripts are used in conjunction with the vibration quantities v and s. rms Value of vibration quantity x Measured value of vibration quantity in the axial direction y Measured value of

38、 vibration quantity in the transverse direction z Measured value of vibration quantity in the vertical direction 1, 2 . n Progressive values 5 Regulations and additional requirements 5.1 For a.c. generating sets used on board ships and offshore installations which are required to comply with rules o

39、f a classification society, the additional requirements of the classification society shall be observed. The classification society shall be stated by the customer prior to placing the order. For a.c. generating sets in unclassified equipment, such additional requirements are in each case subject to

40、 agreement between the manufacturer and customer. 5.2 If special requirements from regulations of any other authority, e.g. inspecting and/or legislative authorities, are required to be met, the authority shall be stated by the customer prior to placing the order. Any further additional requirements

41、 shall be subject to agreement between the manufacturer and customer prior to placing the order. 6 Measuring devices The measuring system shall provide the rms values of displacement and velocity with an accuracy of 10 % over the range 10 Hz to 1 000 Hz and an accuracy of 20 %/+10 % over the range 2

42、 Hz to 10 Hz. These values may be obtained from a single sensor whose signal is either integrated or differentiated, depending on the outcome of the measuring device, to derive the quantities not directly measured, provided the accuracy of the measuring system is not adversely affected. The accuracy

43、 of measurement is also affected by the method of connection between the transducer and the object being measured. Both the frequency response and the measured vibration are affected by the method of attaching the transducer. It is especially important to maintain good attachment between the transdu

44、cer and the point on the generating set being measured when vibration levels are high.2 ISO 2017 All rights reserved BS ISO 85289:2017 ISO 8528-9:2017(E) n r Declared engine speed f Frequency s Displacement t Time v Velocity w Angular velocity x Axial co-ordinate y Transverse co-ordinate z Vertical

45、co-ordinate The following subscripts are used in conjunction with the vibration quantities v and s. rms Value of vibration quantity x Measured value of vibration quantity in the axial direction y Measured value of vibration quantity in the transverse direction z Measured value of vibration quantity

46、in the vertical direction 1, 2 . n Progressive values 5 Regulations and additional requirements 5.1 For a.c. generating sets used on board ships and offshore installations which are required to comply with rules of a classification society, the additional requirements of the classification society s

47、hall be observed. The classification society shall be stated by the customer prior to placing the order. For a.c. generating sets in unclassified equipment, such additional requirements are in each case subject to agreement between the manufacturer and customer. 5.2 If special requirements from regu

48、lations of any other authority, e.g. inspecting and/or legislative authorities, are required to be met, the authority shall be stated by the customer prior to placing the order. Any further additional requirements shall be subject to agreement between the manufacturer and customer prior to placing t

49、he order. 6 Measuring devices The measuring system shall provide the rms values of displacement and velocity with an accuracy of 10 % over the range 10 Hz to 1 000 Hz and an accuracy of 20 %/+10 % over the range 2 Hz to 10 Hz. These values may be obtained from a single sensor whose signal is either integrated or differentiated, depending on the outcome of the measuring device, to derive the quantities not directly measured, provided the accuracy of the measuring system is not adversely affecte